Datasheet

ManualsBrandsKEMET ManualsAluminium Electrolytic CapacitorsElectrolytic Capacitor, Snap-In 220uF 20% 550V

1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4020_ALC10 • 8/27/2015

One world. One KEMET

Benets

• Compact size

• Long life, up to 18,000 hours at +85°C (V

, I

applied)

• High ripple current

• High voltage

• Excellent surge voltage capability

• Optimized designs available upon request

Overview

KEMET’s ALC10 Series of snap-in capacitors covers a wide

range of case sizes and voltage ratings. The ALC10 Series is

designed for high voltage, up to 550 VDC, high ripple current

applications and features surge voltage capability and very long-

life performance.

Applications

KEMET’s ALC10 Series of capacitors is ideally suited for

industrial and commercial applications demanding high reliability

and long life expectancy. Typical applications include frequency

converters, uninterruptible power supply (UPS) systems and

switch mode power supplies (SMPS).

Snap-In Aluminum Electrolytic Capacitors

ALC10 Series, +85ºC

Part Number System

ALC10 A 392 BB 040

Series Termination Capacitance Code (µF) Size Code Rated Voltage (VDC)

Snap-In type Aluminum

Electrolytic

See Termination Table First two digits represent

signicant gures. Third

digit species number of

zeros.

See Dimension Table 035 = 35

040 = 40

063 = 63

100 = 100

200 = 200

250 = 250

350 = 350

400 = 400

450 = 450

500 = 500

550 = 550

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Summary of content (16 pages)

PAGE 1
Snap-In Aluminum Electrolytic Capacitors ALC10 Series, +85ºC Overview Applications KEMET’s ALC10 Series of snap-in capacitors covers a wide range of case sizes and voltage ratings. The ALC10 Series is designed for high voltage, up to 550 VDC, high ripple current applications and features surge voltage capability and very longlife performance. KEMET’s ALC10 Series of capacitors is ideally suited for industrial and commercial applications demanding high reliability and long life expectancy.
PAGE 2
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Performance Characteristics Item Performance Characteristics Capacitance Range Rated Voltage 56 – 82,000 µF 35 – 550 VDC Operating Temperature -40 to +85°C Capacitance Tolerance ±20% at 100 Hz / +20°C D (mm) Rated Voltage and Ripple Current at +85°C (hours) Rated Voltage at +85°C (hours) 25 10,000 16,000 30 13,000 21,000 35 15,000 24,000 40 – 50 18,000 29,000 Operational Lifetime End of Life Requirement Shelf Life Leakage
PAGE 3
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Test Method & Performance Endurance Life Test Conditions Performance Temperature +85°C Test Duration 2,000 hours Ripple Current Voltage Performance Rated ripple current in specified table The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor The following specifications will be satisfied when the capacitor is tested at +20°C: Capacitance Change Equivalent Series Resistance Leakage Current ≤ 1
PAGE 4
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Termination Tables Termination Code A D F C E 25 • • • 30 • • • 35 • • 40 • • G H • • • • • • • • 45 • • • • 50 • • • • Diameter (mm) Mounting: These capacitors are designed to be mounted by their terminations alone and may be used in any position. Dummy pins must be isolated on 4 and 5 pin styles. Termination Code Termination Style LL ±1 Standard Termination Option A 2 Pin 6.
PAGE 5
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Termination Tables cont'd Style A/D SIDE VIEW L PCB LAYOUT TERMINAL END VIEW D Style F SIDE VIEW L D L 3.3 ±0.1 Ø2.5 Minimum + ve 4.75 ±0.1 10 ±0.1 Ø2 ±0.1 Typical - + SIDE VIEW PCB LAYOUT TERMINAL END VIEW LL Style C/E 10 ±0.1 2 ±0.1 LL TERMINAL END VIEW PCB LAYOUT 4 Holes Ø2 ±0.1 on a Ø22.5 PCD - ve - D + 30° 30° LL Style G/H SIDE VIEW L + ve TERMINAL END VIEW - D + PCB LAYOUT 5 Holes Ø2 ±0.1 on a Ø25.
PAGE 6
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Shelf Life The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40°C. See sectional specification under each product series for specific data.
PAGE 7
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC MTBF The mean time between failures (MTBF) is simply the inverse of the failure rate. MTBF= 1/λ Failure Rate early failures wear out operational life Time The failure rate is derived from our periodic test results. The failure rate (λR) is, therefore, only given at test temperature for life tests. An estimation is also given at 40°C.
PAGE 8
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Table 1 – Ratings & Part Number Reference VDC 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 200 VDC Rated Capacitance 100 Hz 20°C (µF) 33000 56000 3900 4700 5600 5600 6800 8200 10000 12000 12000 15000 18000 18000 22000 27000 33000 47000 82000 2200 2700 3300 3300 4700 5600 6800 6800 8200 8200
PAGE 9
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Table 1 – Ratings & Part Number Reference cont'd VDC 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 VDC Rated Capacitance 100 Hz 20°C (µF) 680 820 820 1000 1000 1000 1200 1200 1500 1500 1800 2200 3300 4700 5600 8200 220 270 330 330 330 470 560 680 680 6
PAGE 10
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Table 1 – Ratings & Part Number Reference cont'd VDC 350 350 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 VDC Rated Capacitance 100 Hz 20°C (µF) 2700 3300 100 120 150 150 180 220 220 270 270 330 330 330 330 390 390 470 470 470 470 560 560 560 680 680 820 1000
PAGE 11
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Table 1 – Ratings & Part Number Reference cont'd VDC 450 450 450 450 450 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 550 VDC Rated Capacitance 100 Hz 20°C (µF) 1000 1000 1200 1800 2200 56 68 82 82 100 100 120 150 180 180 180 220 220 270 270 330 330 390 390 470 560 680 680 1000 1500 1800 56 68 82 8
PAGE 12
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Mechanical Data Polarity and Reversed Voltage Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such, they are polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil.
PAGE 13
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Marking KEMET Logo Rated Capacitance, Capacitance Tolerance Rated Voltage (VDC) Series, Cap.
PAGE 14
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Construction cont'd The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then “formed” to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact.
PAGE 15
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.
PAGE 16
Snap-In Aluminum Electrolytic Capacitors – ALC10 Series, +85ºC Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.