MDNNEN STEIN Quick Start Guide Indoor Security Camera QC21SE
1.
2.Camera Information Note: Please don't force the camera to turn around manually 5 2 或怨\海 : ·::·'.·.心 丧··::,:, ;;[:,令:.'.' .(, :三 3 ·嗟).(}器': 另.. 4 诧; UDNNEN 5TEIJ 6 1.Light Sensor 2.Lens 3.Microphone 5.Speaker 6.Reset Button 7.Power Interface 02 4.
3.Product Installation 2 4 3 'i l1 1. Place the mounting bracket on the wall before punching, mark it with a marker pen, then punch the hole 2. Insert the plastic anchor into the hole 3. Install the mounting bracket to the wall with a screwdriver and screws 4.
4.Basic Parameters Product Name: Indoor Security Camera Product Model: QC21SE Video Resolution: 2.0MP,1920*1080 Video Coding-Decoding Technology: H.264 Image Enhancement: Digital Wide Dynamic, 3D Noise Storage: TF Card/Cloud Storage Wireless Encryption: WEP / WPA / WPA2 Power Input: 5V =1A(Min) Total Power Consumption: 5W (Max) Wireless Standard: 2.4G 802.11 b/g/n Compatible System: Android/lOS Note: • To reset camera: Long press the reset button about 5 seconds when reconnecting camera.
5.lnstall the App 1.Scan the QR code below to download and install the App 2.
6.Scan QR Code Mode • Please make sure that Wi-Fi is available and the phone is connected to network, and power on the camera through the adapter and power cord • Open the App of "Smart life'. Click the sign of "+"in the top right corner of homepage (Picture 01). Select "Security&Video Surveillance·: click'Sma t Camera(W由) "to add a camera(Picture 02).
• If the phone is not connected to Wi-Fi, please click"Go to connect" (Picture 04) • It will jump to the interface like picture 05, please be noted that only 2.4G Wi-F1 is supported • If the phone is connected to W中(Picture 06), please click"Next" 旺了 Ente, Wo-f; 心...一应严 I pa$$0W叩 C) ,令。 J心,,. ,... -昢e忱�'''""""""'" ,ow;.,;_ 压m,心'"-°''° 吟·伍.,.., ••• ,.�心...
• The App will generate a QR code, use camera lens to scan the QR code(Please keep the distance between camera and QR code within 20-30cm). A prompt tone will be heard if scan successful.
• The camera will be added successfully when jump to picture 09. Then click the button of"Done·. The interface will jump to preview like picture 10 • Back to the homepage of App from preview, then the added devices will all appear on the homepage (Pictu「e 11). You can click the added device directly to view monitoring status next time instead of adding it again 下令 氏ae!I配 令 Sma,:;:m.,, ,._,如晒I Ad蚐 . ,I) • 妒Smanca叩"/ sm,,.
7. Wi-Fi Mode (I)EZMode • Please make sure that W吁i is available and the phone is connected to the network, and then power on the camera through the adapter and power cord • Open the App of ·smart life", Click the sign of "+ 霓 in the top right corner of homepage (Picture12). Select "Security&Video Surveillance 霓,click ·smart Camera(Wi-Fi)" to add a camera(Pictu 「e 13).
• The interface jumps to picture15, click "Next''. select the "EZ Mode" (Picture16) Note: This device has no indicator light, please operate according to the instructions ' , • Click the "EZ Mode', the interface will jump to picture 17. Connect to Wi-Fi, enter the account and password, click "Next" Rmtthe de,ke fast ......... 叭小佩 ·扣 _00 .. 山心且瀛•m心以」,.汁,a忙减"" P心叩妇妇,...,, 谝急="''"'"'"' 阳寸飞m心, •• ,_,,,可石心可" , "···-"·"� 汇'"亿�... Select 2.
• Return back to App after connecting completed. You can see that the device is being added (Picture 18) • After adding successfully, the interface will jump to picture 19 • Click the button of "Done" on the top right corner. The interface will丿ump back to preview interface (Picture 20) ""'"''叩丑, Add;ng de,;ce ,m,,.,,.,,,.,.
(II)AP Mode: • Please make sure that Wi-Fi is available and the phone is connected to network, and power on the camera through the adapter and power cord • Short press the reset button less than one second to shift AP mode •Open the App of "Smart life", click the sign of'+" in the top right corner of homepage (Picture 21). Select "Security&Video Surveillance 霄, click·smart Camera(W中)·to add a camera (Picture 22).
• The interface jumps to picture 24, click "Next". Select the "AP Mode" (Picture25) Note: This device has no indicator light, please operate according to the instructions h ol 14 才 凸'3'3'3'3 Select! 加"""'of the lodkatm light°' heanh, 扫ep, 6 g · · 可"'"'> w 如 会YSX-2.4G-008 陌,___ ,,首,,. .. � �奾 厂 ....... ,. ..... 募心.... 以鲁峪归....... 心 .... 一”“冰“啊-健归叩 w etd ........... 忙efim. ._,.
• The App will」ump to the interface (Picture 27), click"Go to Connect" at the bottom of page • Then will」ump to WLAN connection interface of your phone, choose the hotspot starting with"Smart Life_xxxx" (Picture 28) • Return back to App after connecting completed. You can see that the device is being added (Picture 29) ",W令 . C 心 Coo=t yru, =•I• phoae to the deoice's hot叩t "心心"'"'忱0心b伤'''"沁t s邱"'"'"'· 宁。 9 hw_=oa,<_05'0
• The camera will be added successfully when」ump to picture 30. Then click the button of"Done". The interface will jump to preview like picture 31 • Back to the homepage of App from preview, then the added devices will al I appear on the homepage(Picture 32). You can click the added device directly to view monitoring status next time instead of adding it again ,一宁 亡了 I'111 今 S ma ,芦 me『a Add织 ,.
8.App Video Interface Information . ....:.... ' , 尸D 匕 1 Preview Mode 2Voice 3 Long Screen 4Time 5 Microphone 6 Picture 7.
9.Points For Attention • Stay away from metal objects • Please avoid to place the camera on the back of the furniture or inside the microwave oven • Please avoid placing the camera somewhere surrounding with audio cables, video cables, and USB cables. And try to keep away from cables as far as possible • Please try to make the camera within the Wi-Fi signal range.
This product complies with the environmental requirements of RoHs. At present, there is no mature technology in the world that can replace or reduce the contents of lead in electronic ceramics, ceramics, optical glass, steel and copper alloys 11.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.