User's Manual

2.1Bluetooth Speaker（S318）

Instructions

1> Functional overview

1. 2.1 Bluetooth bedside audio ; bass is passive box, amplifier built and controlled

into vice box.

Bass Dimensions: W240 * D140 * H100mm

Vice Box Dimensions: W110 * D80 * H80mm

2. I / O interfaces:

1、DC IN:DC5V/2A (Lead 2.4M，Φ5.5DC female plug)

2、AUX IN : Φ3.5 input interface X3（Lead 165mm，4-pole 3.5 stereo female plug）

3、AUDIO OUT: Φ3.5 output interface X3（Lead165mm，4-pole 3.5 stereo female

plug）

4、Bluetooth input

5、Right channel output (RCA white male plug), subwoofer output (RCA Red male

plug)

3. Functional requirements: (S318)

A．Input: BT-AUX, default state is Bluetooth when power-on, connect in priority to

devices paired before but not depaired, search the name of this speaker to

connect if your device has never paired before; press the HOME key to switch to

the AUX mode.

B. Volume Control: press VOL- and VOL + button to decrease or increase the

volume when in use.

PAGE 1
2.1Bluetooth Speaker（S318） Instructions 1> Functional overview 1. 2.1 Bluetooth bedside audio ; bass is passive box, amplifier built and controlled into vice box. Bass Dimensions: W240 * D140 * H100mm Vice Box Dimensions: W110 * D80 * H80mm 2. I / O interfaces: 1、DC IN:DC5V/2A (Lead 2.4M，Φ5.5DC female plug) 2、AUX IN : Φ3.5 input interface X3（Lead 165mm，4-pole 3.5 stereo female plug） 3、AUDIO OUT: Φ3.5 output interface X3（Lead165mm，4-pole 3.
PAGE 2
C. Bluetooth status will automatically switch to AUX IN to play via LINE if insert the audio signal line; unplug the audio signal line to automatically resume to Bluetooth status . D. Multiple sets of machines can play the same sound source synchronously by connecting the four section stereo signal line into the LINE IN & LINE OUT interfaces of the vice machine control box. E.
PAGE 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.