Issue department:Bedding Division Product Function instruction Date: Author: 2021-10-11 BenYang No:MC242 Version: 1.1 Page 1 of 5 MC242 User Manual of MC242 1.
Issue department:Bedding Division Product Function instruction Date: Author: No:MC242 Version: 1.1 Page 2 of 5 MC242 2. Function Picture 1. 2021-10-11 BenYang Process of test 1.1. HEAD MOTOR Connect to head actuator,control by remote single: Click head up button on the remote, head actuator moves out, stop when released; Click head down button,head actuator moves in, stop when released; This function takes effect only by pressing the corresponding button on the remote. 1.2.
Issue department:Bedding Division Product Function instruction Date: Author: 2021-10-11 BenYang No:MC242 Version: 1.1 Page 3 of 5 MC242 1.3. TILT and Lumbar MOTOR Connect to TILT and Lumbar actuator,control by remote single: Click bed up button,TILT and Lumbar actuator moves out,stop when released; Click bed down button,TILT and Lumbar actuator moves in,stop when released; This function takes effect only by pressing the corresponding button on the remote. 1.4.
Issue department:Bedding Division Product Function instruction Date: Author: 2021-10-11 BenYang No:MC242 Version: 1.1 Page 4 of 5 MC242 The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that the code paring is successful; If fails, repeat all the processes above; 1.10.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.