Issue department:Bedding Division Product Function instruction MC132 Date: Author: 2018-03-26 Kyle No: Version: 1.1 Page 1 of 5 MC132 Function instruction 1.
Issue department:Bedding Division Product Function instruction MC132 Date: Author: No: Version: 1.1 Page 2 of 5 2. Function Picture 1. 2018-03-26 Kyle Process of test 1.1. HEAD port Connect to head actuator,control by remote single: Click head up button on the remote, head actuator moves out, stop when released; Click head down button,head actuator moves in, stop when released; This function takes effect only by pressing the corresponding button on the remote. 1.2.
Issue department:Bedding Division Product Function instruction MC132 Date: Author: 2018-03-26 Kyle No: Version: 1.1 Page 3 of 5 1.3. Lumbar port Connect to foot actuator,control by remote single: Click Lumbar up button,foot actuator moves out,stop when released; Click Lumbar down button,foot actuator moves in,stop when released; This function takes effect only by pressing the corresponding button on the remote. 1.4.
Issue department:Bedding Division Product Function instruction MC132 Date: Author: 2018-03-26 Kyle No: Version: 1.1 Page 4 of 5 If fails, repeat all the processes above; 1.9.
Issue department:Bedding Division Product Function instruction MC132 Date: Author: 2018-03-26 Kyle No: Version: 1.1 Page 5 of 5 (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.