User's Manual
User manual of the Remote controller
Model Name: SFD-Y-14,SFD-Y-18
Press TIMER button: set the
massage intervals with each press of the button (10, 20, 30 min). when the timing is over. All massage
motor will automatically stop.
SFD-Y-14
Press
ALL
OFF button:
Al
l
the massage motor
s
will stop work
i
ng.
Press HEAD button: control the rise and fall of the headboard.
Press FOOT button: control the rise and fall of the footboard.
Press TILT button: control the rise and fall of the tiltboard.
Press LUMBAR button: control the rise and fall of the lumbarboard.
Press FLA
T button: under any position, the bed will return the flat position.
Press ZERO G button: under any position, the bed will return the ZERO G position.
Press TV/PC button:
und
e
r any position, the bed
will return the
TV/PC position.
Press LONGE button:
un
der any position, the bed will return the LONGE position.
Press HEAD +/-: adjust the HEAD vibrating strength.
Press FOOT +/-: adjust the FOOT vibrating strength.
Adjust Frequency: Manually select the frequency of code automatically.
SFD-Y-18
Press BACK button: control the rise and fall of the backboard.
Press FOOT button: control the rise and fall of the footboard.
Press FLAT button: under any position, the bed will return the flat position.
Press MEMORY button: under any position, the bed will return the MEMORY position.
FCC STATEMENT:
1.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1). The device may not cause harmful interference
2). The device must accept any interference received, including interference that may cause undesired operation
2.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
.