Users Manual

ManualsBrandsKCF Technologies ManualsElectronics802.11ac/b/g/n Wi-Fi+BT Module

Wireless Module

WPEQ-262ACNI(BT)High Power

Standards

IEEE 802.11ac/a/b/g/n (2T2R)

Bluetooth V4.2, V4.0 LE, V3.0+HS, V2.1+EDR

Chipset

Qualcomm Atheros QCA6174A-5

Data Rate

802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: MCS0~15/ 802.11ac: MCS0~9

Bluetooth: 1 Mbps, 2Mbps and Up to 3Mbps

Operating Frequency

IEEE 802.11 ac/a/b/g/n ISM Band, 2.412GHz~2.484GHz, 5.150MHz~5.825MHz

*Subject to local regulations

Interface

PCIe: WLAN / USB: Bluetooth

Form Factor

Mini PCIe

Antenna

2xIPEX connectors

(J1 for WIFI+BT, J14 for WIFI)

Modulation

802.11b: DSSS (DBPSK, DQPSK, CCK)

802.11a/g: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM)

802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM)

Power Consumption(Max.)

TX: 610mA

RX: 298mA

Operating Voltage

DC 3.3V

Operating Temperature Range

-40°C~85°C

Storage Temperature Range

-45°C~90°C

Humidity

(Non-Condensing)

5%~90% (Operating)

5%~90% (Storing)

Dimension (in mm)

50.08mm x 29.85mm x 3.4mm (±0.5mm)

Weight (g)

≦ 6g

Driver Support

Windows 7/8.1/10

Linux (Open Source), Recommend Kernel v4.0+

Security

64/128-bits WEP, WPA, WPA2, 802.1x

Summary of content (9 pages)

PAGE 1
Wireless Module WPEQ-262ACNI(BT)High Power Standards Chipset Data Rate IEEE 802.11ac/a/b/g/n (2T2R) Bluetooth V4.2, V4.0 LE, V3.0+HS, V2.1+EDR Qualcomm Atheros QCA6174A-5 802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: MCS0~15/ 802.11ac: MCS0~9 Bluetooth: 1 Mbps, 2Mbps and Up to 3Mbps IEEE 802.11 ac/a/b/g/n ISM Band, 2.412GHz~2.484GHz, 5.150MHz~5.
PAGE 2
Wireless Module OUTPUT POWER & SENSITIVITY 802.11b Data Rate Tx ± 2dBm Rx Sensitivity 11Mbps 16dBm ≦-87dBm 802.11g Data Rate Tx ± 2dBm Rx Sensitivity 54Mbps 15dBm ≦-72dBm 802.11n / 2.4GHz Data Rate Tx ± 2dBm (1TX) Tx ± 2dBm (2TX) Rx Sensitivity MCS7 18dBm 15dBm ≦-69dBm MCS7 18dBm 15dBm ≦-67dBm HT20 HT40 802.11a Data Rate Tx ± 2dBm Rx Sensitivity 54Mbps 17dBm ≦-74dBm 802.
PAGE 3
Wireless Module Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 4
Wireless Module KDB 996369 D03 OEM Manual v01 rule sections: 2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15. 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition. Any other usage conditions such as co-location with other transmitter(s) or being used in a portable condition will need a separate reassessment through a class II permissive change application or new certification. 2.
PAGE 5
Wireless Module 2.10 Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required.
PAGE 6
Wireless Module Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
PAGE 7
Wireless Module nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product.
PAGE 8
Wireless Module Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p.
PAGE 9
Wireless Module Approved antenna(s) list Model Antenna Type 2.4G gain with cable loss (dBi) 5G gain with cable loss (dBi) Sparklan AD-300N Dipole 3 5 Sparklan AD-103AG Dipole 2.02 2.03 No.