KCTM-2000 RFID Module Guide Date 2019-04-30 Rev 03 Page 1 KCTM-2000 2000 RFID Module CONFIDENTIAL Document KCTNS All rights of reproduction and disclosure reserved.
KCTM-2000 RFID Module Guide Date 2019-04-30 Rev 03 Page 2 ▷ Reader Performance ITEM SPECIFICATION Model Name KCTM-2000 2000 Protocol EPC global UHF Class1 1 Gen2 V2 / ISO 18000-63 Modulation PR-ASK Frequency 865MHz~868MHZ / 902MHz~928MHz RF Output Port 2 Port( Default ANT0 ) Max Tx Power =< 30dBm (+-0.5dB) 0.
12505WR-10 DF40C-40P Pin No. Date 2019-04-30 Rev 03 Page 3 KCTM-2000 RFID Module Guide Name I/O Description Pin No. 1,2,3 31 ~ 40 BAT Power +3.8~4.8V input 4,5,6 21 ~29 GND Power Ground 7 18 TXD Out UART TX Data 8 19 RXD In UART RX Data 9 20 ENABLE In Module Power Enable (Active “High”) 10 7 FW_DN In Module Firmware Download ( Active “Low”) **Pin10(FW_DN) : After setting to Low, if you "Reset or Power On", it enters the download state.
KCTM-2000 RFID Module Guide Date 2019-04-30 Rev 03 Page 4 ▷ Mechanical Drawing - KCTM-2000 Dimension ** See 2D, 3D drawing. CONFIDENTIAL Document KCTNS All rights of reproduction and disclosure reserved.
KCTM-2000 RFID Module Guide Date 2019-04-30 Rev 03 Page 5 ▷ WARNING & CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with ith part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.