Specifications

- 1 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 -
Contents
●Safety use rules................................................................01
●Getting to know your Weather Radio..............................02
●How to charge your Weather Radio...............................05
●How to charge other devices by radio............................06
●How to use FLASHLIGHT or SOS ALARM etc..................07
●How to use bluetooth speakers......................................08
●How to use radio (am/fm/wb/noaa)............................08
●Kind reminder...................................................................11
●Specification....................................................................12
Thank you very much for this purchase. Please read
this manual carefully and use it correctly. Please be
sure to read the "Safety Rules" before using the
product. After reading it, please keep this manual
properly.
Safety use rules
In order to prevent hazards or damage to the user and to people or
objects in the vicinity, this manual sets out the matters that you are
expected to observe. In order to use the product safely, please fully
understand the relevant contents
This symbol indicates that if the content
is ignored, it is expected to cause
damage to people or damage to objects
●In case of thunder when using outdoors, please fold the
antenna and evacuate to a safe place.
●Do not use it in an unstable place or condition.
●Do not use, install or store the antenna in a place near
the fire, such as a fireplace.
●Please be sure to use the configured USB charging
cable for charging the body. Otherwise, there is a risk
that it will not charge properly.
●Do not tie up the charging cable or place objects on it.
●Do not operate or use with wet hands.
●Do not subject the device to strong impacts such as
drops or collisions.
●Do not expose your eyes to light. Otherwise, it may
cause physical discomfort.
●Do not place it in a place facing the sun or under the sun
for a long time.
●Do not disassemble or modify.
●Do not insert external objects into the ports or
connectors of the product.
●Do not drop it in water, immerse it in water, or leave it in
the rain for a long time.
●Do not wipe the machine body with thinner gasoline
or alcohol.
*Please put a little neutral cleaning solution in the water
and wipe off the stain with a hard cloth.
●Do not use if there are any abnormalities such as odor, heat,
discoloration, deformation, etc., during use or storage.
●Only for people over the age of children, please do not
put it in a place where young children can reach.
●Please unplug the USB charging cable if it is not used
for a long time.
● Please do not use or store the device in a state where it
is covered with oil, etc.
●When disposing of it, please follow the waste disposal
instructions of each place.
*We will not be responsible for anything caused by the wrong Method
of use. Please be aware of this.
*The LED in the product cannot be replaced. Please be aware of this.
Getting to know your Weather Radio
How to charge your Weather Radio
Charging method when using a USB (Type-C) charging cable
1. Press and hold the power button to turn off the power. Please do not charge
with the power on
2. Open the port cover
3. Insert one end of the attached USB (TYPE-C) charging cable into the input
port of the device, and connect the other end to your USB adapter or
computer USB port for charging. The charging light of the Screen will light
up red. during charging. When charging is complete, the charging light will
show green, and the battery level will show 99.
4.Unplug the USB charging cable to close the port cover
Caution
● Do not use a USB charging cable that is not included for charging
● When using the device for the first time, please fully charge it.
● When charging with a USB hub, it may not charge properly. Be sure to
use the USB adapter or the USB port on your computer to charge in an
environment where a stable power supply is available.
It will take 2.5 hours to charge when all the power
is used up fully.(This is the data of the laboratory test,
subject to the actual charging time).
When the charging light shows green, please unplug
the USB charging cable.
About the use during the charging.
Please do not use this unit while charging. This will
accelerate battery deterioration and cause battery damage.
When using near water, please make sure the port cover
is closed before using.
The use of hand-cranked power charging
1. Press and hold the power button to turn off the power. Please do not
charge or generate electricity with the power on.
2. Pull out the handle.
3. Rotate the handle clockwise to charge and generate electricity. Please
rotate slowly at the beginning and gradually speed up the rotation speed.
The charging light will light up red when the handle is rotating. Make the
handle rotate 130-150 times a minute to charge. In the case of no power,
continue to rotate for 5 hours can be fully charged. (This is the data of the
laboratory test, subject to the actual charging time)
4. Pack up the handle.
1. The battery light illuminates red when charging through the solar panel.
2. Lights up green when fully charged.
1. Press and hold the power button to turn off the power. Please do not
charge with the power on.
2. Open the port cover.
3. Plug in the USB charging cable at the output port Plug in the USB
charging cable at the output port and connect to an external machine.
* The cable for charging is not provided. Please use the cable that comes
with the external machine.
● The output of this product is 1.5A. Please do not use it if the device
being charged does not support 1.5A.
● Damage or accidents to this product or rechargeable products
caused by the use of unsupported equipment are not warranted.
● Please check with the manufacturer of the charged device to see if it is
supported. The battery life of the recharged device may be shortened
due to different specifications of the recharged device.
● This product is not guaranteed to charge all external devices. The
charging speed may be very slow or almost impossible due to the
specification of the device and cable being charged.
● Due to the specification of the charged device and cable, it may only
charge up to 90~99%.
● Do not charge external devices at the same time as charging the unit.
How to use FLASHLIGHT
or SOS ALARM etc
Method of use of high beam
Press the button, the high beam will turn on,
Press it again, Strobe light will light up
Press the third time to turn off the light
Press " > " to play the next song.
Press " < " to play the previous song
Long press ④ "M" key ,the device will be disconnected from other
devices and in the state of standby connection.
At this time, "BT" will keep flashing.
● Turn on the device, press the "M" button, switch to "BT" mode.
When "BT" is flashing, turn on the Bluetooth of your phone,
search for "DF-589", click it and connect. When the device is connected,
"BT" will not blink.
When the device crashes or other circumstances require, you can insert the
card pin into this hole, and then restart the device after forcibly shutting down.
How to use bluetooth speakers
● Long press the + button, as shown above, the volume will increase.
● Press and hold the - button, as shown above, the volume will decrease.
The volume can be adjusted from V-00 to V-27. V-00 is silenced.
● Press ① "Power button" to enter the mute mode, and then press again
to release the mute mode.
● In the FM/AM mode of the radio, long press the button ④ "M" key, the device
will automatically retrieve all frequencies from the lowest value, automatically
select and save the receivable channels. When the first receivable channel is
retrieved, the value will stop briefly and display "P01", and then continue to
retrieve subsequent frequencies. When the second channel is retrieved, the
value will stop briefly again and display "P02", then continue to search for
subsequent frequencies. When encountering receivable channels, the process
can be deduced until all channels are received.
* The number of channels that can be received varies depending on the
radio wave condition of the place of use.
* Station search by manual operation cannot be saved.
●
Select the next channel
In AM/FM mode,the frequency value of Screen will change to "P00
(00 is the received channel number)", and then it will change to the next
channel. Press the + button to change to the next channel as well.
●
Select the previous channel
When the Screen is "P00 (00 is the received channel number)",
press the - button to change to the previous channel.
For better signal reception
● Please charge the battery every 2~3 months.
* Due to the characteristics of the battery, if the battery has no power for a long
time, its life may be greatly shortened, and it may not be able to be charged.
● Please disconnect the power for storage.
* The battery life may be greatly shortened.
● Do not store in a humid environment.
* Metal parts may rust.
● When this product is wet, wipe off the moisture with a soft measuring cloth.
● When the device is stained, you can use a hard cloth dampened with a small
amount of water diluted with neutral detergent to wipe it, and wipe it with a
cloth moistened with clean water, and then place the device in a cool,
ventilated place to dry.
● Do not wipe the body with thinner gasoline or alcohol.
1. Mode display
●BT/WB/NOAA/FM/AM
2. Display frequency
● Displays the present frequency or volume and the saved channel.
3. Power display
●Lights up red when charging,lights up green when fully charged.
Displays the current charge level, when fully charged, only 99 will be displayed.
4. Status display
●Mute / Pause
Caution
Charging and power generation through the handle is the
backup charging function.
It is recommended for use in emergencies.
Charging by the solar panel is the prepared charging function.
It is recommended for use in emergency situations.
Charging method when using solar panels
Screen
How to charge other devices by radio
Volume adjustment method
How to reset
How to use radio (am/fm/wb/noaa)
AM/FM Mode
● Press the "M" key, and the FM/AM of the radio will be switched.
● Press the “>” page down, and the radio frequency will rise one by one.
●Press the“<”page up, and the frequency of the radio will drop one by one
● Long press the “>”/“<” button will retrieve the frequency
semi-automatically and will not save it automatically
How to change the frequency
Automatic channel search
How to switch saved channels
●When playing FM
Extend the antenna and adjust the antenna to the direction where it can
be heard most clearly.
●
When playing AM
Please orient the unit to the direction where it can be heard most clearly.
●Press the M key to switch to WB mode.
●Pressing "+" will switch to the next channe
●Pressing "-" will switch to the previous channel
How to change channels
●Press the M key to switch to NOAA mode
In this mode, the device will automatically receive a playback of weather and
natural disaster information from the National Weather Service, eliminating
the need to find a station yourself manually. When the weather service is
not broadcasting information, the device will not play any information.
Method of use of NOAA
WB Mode
***
***
Kind reminder
Specification
Power Supply Rechargeable (DC3.7V Li-polymer battery 2000mAh)
*For the improvement of products, specifications and appearance
may be changed without prior notice.
Please assist in battery recycling when disposing of the
product. Lithium polymer batteries are used in the product.
For efficient use of resources, please follow the waste
disposal instructions of each local government when
disposing of the product.
Light source used Main light: LED (daylight color) 1.5W
Bluetooth version 5.0, compatible with Bluetooth V5.0+BR+EDR+BLE
Brightness Main light: 110 lm
Charging time Approx. 2.5 hours (when using USB)
Continuous
use time
Radio: about 35 hours;
Main light: about 60 hours
USB output DC 5V 1.5A
Rated power 5W
Port IInput：USB（Type-C）; Output：USB（Type-A）
Receiving
frequency
FM:76~108MHz(Supports wide FM)
AM:520~1710Khz
Dustproof and
waterproof
Yes
Accessory USB（Type-C）Charging cable, spring buckle
Material ABS、TPU
USB(Type-C) charging cable
⑦.Screen
⑧. Compass
⑨. Flashlight button
⑩. SOS button (bottom side):
alarm tone (long press)
�. Compass
�. SHand crank
�. USB output port
�. Type-C input port
�. Reset Hole
�. Antenna
�. Lanyard hole
�. High beam
�. SOS light
Input port
Connect output port
Connect stable power s
upply USB port
Portable Radio
DF-589
4
1
Method of use of high beam
Method of use of SOS button
Switch to the next song
Switch to the last song
Long periods of non-use
①.Power button:
ON / OFF (long press)
Mute/Pause (short press)
②.Page Down (short press)
Automatically search for the next
receivable channel (long press)
③. + key:
BT Mode:
Increase volume (press and hold)
FM/AM Mode:
Increase volume (press and hold)
Next saved station (short press)
④. M key:
Switch Mode:
BT/FM/AM/WB/NOAA (short press)
Automatically search and
save channels (press and hold)
*Do not do any operation during the
automatic channel search, wait for the
channel to be retrieved completely
⑤. Page Up(short press)
Automatically search for the previous
receivable channel (long press)
⑥. - key:
BT Mode:
lower volume(long press)
FM/AM Mode:
lower volume(long press)
Previous saved station (short press)
21
43
FM AM
BT WB NOAA
KHz
MHz
1. Press and hold the SOS button at the bottom of the body. The alarm will
sound, and the SOS light will flash red.
2. Press and hold the SOS button again, and the alarm will stop. Please note
that it will sound very loud.
FM AM
BT WB NOAA
KHz
MHz
Reset hole
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
FM AM
BT WB NOAA
KHz
MHz
17 2 3
1189
10
654
12
16
15
14
13
17
18
19
USB output
The WB/NOAA function is a dedicated channel for
receiving weather disaster information in the United
States and Canada. It is only available in the United
States and Canada.