Operation Guide

ManualsBrandsKAVE Industries ManualsElectronicsairKAVE Room

1 OVERVIEW

Turn ON / Hold to turn OFF | Tap to cycle modes

Turn ON | Tap for function options

Mode & Power Level displays

Clean air exits here

Contaminated air enters here

Barrel type socket

1. Function Button

2. Selection Button

3. Top LED Indicator

4. Front Out Air-vent

5. Back In Air-vent

6. Back Power Port

2 KEY FEATURES 5 SAFETY PRECAUTIONS 6 OPERATION GUIDE 7 PANELS

ACTIVE SANITIZATION

NO EXOTIC FILTERS

RAPID EFFECTIVENESS

WIFI CONTROL

Plascide Micro-lightning process

Anti-germ & VOCs technology

No expensive, special or exotic filters required

A simple fine dust filter for ease of mind

Where every breath counts,

Sanitise within seconds

Control and monitor your ROOM

wherever you are

3 PACKAGE CONTENT

4 QUICK START

1. airKAVE ROOM

2. Fine Dust PM 2.5 filter (Type: E12 or H13)

3. Air-vent Large Dust filter (Washable)

4. Power supply adapter

5. Manual & Warranty Card

6. Magnetic Feet (x4)

1. Handle with care when transporting

or moving

2. ROOM can be damaged if dropped,

burned, punctured or crushed

3. Do not operate if damaged and / or

when any parts are broken to avoid

potential injury

4. Power with the included power

supply adapter only

5. Do not operate with damaged

connectors, cables or power supply

adapter

6. During operation or storage keep

indoors and dry

7. Do not operate if wet and / or

immersed in any liquid to avoid

potential injuries and/or damages to

properties

8. Do not allow infants and young

children to operate unsupervised

9. Keep magnetic feet away from

infants, young children and animals as

they can be choking hazards

10. Do not insert any objects into the In

or Out air-vents

11. Do not operate without any parts

attached or any panels left open

12. Close left side panel and ensure all

filters are seated correctly before

operating

13. Do not block the In or Out air-vents

during operation

6.1 Function Button

6.2 Mode Selection

Immediately after turning on, default mode is set to Manual.

LED MODE DESCRIPTION

RED OFF

Fan & sanitization Off, WIFI in Standby

WHITE MANUAL

Direct control by user

BLUE PROGRAM

Time & Day schedule set by user

YELLOW

TIMER

Turn off after a set duration

GREEN ECON

Pre-programmed optimized performance

In Manual, Timer and Program mode, sanitization power levels can

be adjusted manually from the ROOM interface.

In Econ mode, sanitization power level is automatically set and

cannot be manually adjusted.

D. On the list display select the ROOM you wish to control,

this will load the login page: See Step 3 Below

7.1 Quick Connect Guide

Remotely control and customise settings for Timer & Program mode

from a web browser on a PC, Mobile or Android app from google

Play Store. Step-by-Step Control Guide, please see: 11.4 Support

6.4 Sanitization Power Levels

POWER DESCRIPTION

1 SILENT

Quiet comfort & Sleep

2 LOW

Low power for relaxing study

NORMAL

Everyday optimized power

4 BOOST

Max coverage for demanding situation

5 OFF

Turn OFF (Program Mode Only)

In Manual, Program and Timer modes, press to cycle

through the power levels.

In Program mode, you can configure each schedule to a specific

sanitization power level, for any time and day.

For more details, see: 7.6 Configure: Program

In Econ mode, sanitization power level is automatic and cannot be

manually changed during operations.

6.5 Sanitization Power Indicator

sanitization power LEDs are shown in GREEN. Mode LED will be

shown in different colours. See: 6.3 Mode Indicator

3. After connecting by android app or web browser, The ROOM

Default Username: admin

Default Password: admin

4. Only one user can control remotely (App/Browser)

“Log out” (Top left) to allow another user to connect

Plug Power Supply into the ROOM & the Wall Socket

WIFI Hotspot (WIFI4 / 2.4GHz) will turn on automatically when

connected to power supply. Ensure the Indicator LED is lit RED.

6.3 Mode Indicator

Tap or to turn ON the ROOM.

To turn OFF, press and hold for a few seconds.

Tap to cycle the modes, LED will flash to different colours

when cycled.

CONNECT BY ANDROID APP

A. Download on Google Play Store (QR Link):

https://play.google.com/store/apps/details?id=com.aonetech.airhalo

B. At the home screen, press “Refresh” button

to search for your ROOM. A list of available

WIFI HOTSPOT will be displayed

Preparation before use:

1. Plug power supply adapter into wall socket

2. Plug barrel type connector into ROOM’s back power port

3. Press or Button until LED indicator turns green

4. Tap button to change sanitization power level

x4 Power LED

MODE LED LEVELS

POWER LED INDICATOR

See:

6.3 Mode Indicator

SILENT



LOW



NORMAL



BOOST



192.168.100.1

Device use 2.4GHz band. Interference may occur in congested areas.

If unable to connect to Hotspot, Switch off other devices and/or move

to a less congested WIFI area. Please see: 11. Troubleshooting

For online Step-by-Step Control Guide, please see: 11.4 Support

Connect by Web Browser

1. Connect to ROOM’s WIFI hotspot manually: See Step D

2. In your web browser search bar, type the IP address:

C. WIFI HOTSPOT name (SSID) is

Model No. + Serial No. Please see product label

for details ( “AHD01SXXXX” )

7.2 Control Panel

• On/Off – Turn the ROOM to Standby mode

• Mode/Power Status – Display current status here

• Modes – Switch to Manual/Timer/Program/Econ

• Power Level – User can take manual control

• Advance Panel – Access by “Gear” icon (Top Right)

• Logout – Return to login page “Cross” icon (Top Left)

Switch modes to Manual, Timer, Program or ECON:

Click Manual, Timer, Program or ECON button to activate.

You can change to manual mode by:

1. Click “manual” button or Select a sanitization power level

2. Press button to apply manual mode

7.3 Advance Panel

Set specific options from the Configure and System group.

Clicking on the button will take you to the specific panel options.

LED Brightness can be set for all indicator LEDs

Ranging from “Off”, “Dim”, “Normal” or “Bright”

Set Brightness:

1. Select brightness option from drop down menu

2. Selection will be applied immediately

Reset - !Warning!

Selecting this option will restore all software to factory default.

Please see for more details: 11.1 Troubleshooting

• Device Name – Display name of the ROOM

• Login Password – Set custom password

• Configure – Configure options for specific modes

• System – Configure device settings

• Bright – Set the brightness of the LEDs indicator

• Reset – Apply factory default

Set new Device Name and/or Login Password:

1. Select the ROOM name/Login Password field

2. Enter a new alphanumeric entry

3. Click “Apply” to set new name/password

4. Click “Back” to return to Control Panel

Summary of content (2 pages)

PAGE 1
OVERVIEW 2 KEY FEATURES ACTIVE SANITIZATION Plascide Micro-lightning process Anti-germ & VOCs technology NO EXOTIC FILTERS No expensive, special or exotic filters required A simple fine dust filter for ease of mind RAPID EFFECTIVENESS 2. Selection Button Turn ON | Tap for function options 3. Top LED Indicator Mode & Power Level displays 4. Front Out Air-vent Clean air exits here 1. 2. 3. 4. 5. 6. 2. ROOM can be damaged if dropped, burned, punctured or crushed 3.
PAGE 2
7.4 Configure: Timer 7.6 7.7 System: Clock Network Timer mode automatically shutdown the ROOM within a set duration when activated. Configure the duration of the timer in hours and minute incrementation: 1. Select hours from 00hrs to 24hrs and Select minutes from 00mins to 59mins 2. Select sanitization power level by tapping button 3. Click “Apply” 4. Click “Back” to return to Advance Panel 7.5 Configure: Program Multiple ROOM’s can connect to the same WIFI Local Area Network (WLAN) on a home network.