KAT Walk Coord 2 OWNER'S MANUAL This product is for personal use ONLY. Any form of commercial application is prohibited.
Acknowledgement Thank you for purchasing our product! Please, read this instruction manual carefully and keep it safely stored for future use.
INDEX Foreword First & Foremost 05 Safety Instructions 05 Declaration Health Warnings PRODUCT INTRODUCTION Product Description KAT Walk Coord 2 Description Product Appearance KAT Walk Coord 2 Dedicated Shoes Introduction KAT Shoes 2 KAT Walk Coord 2 Sensor Introduction Product Parameters PRODUCT INSTALLATION Precautions Tools Preparation Finding a suitable place Unpacking Method Packing List Reminder Installation of the HMD Wire Pulley (Giveaway) SOFTWARE SET-UP 05 08 09 09 09 10 10 10 1
Controller Options 23 Game Configuration 25 Locomotion Modes Recommended Games Step Counter System Device Manager Direction Calibration FIRST USE OF KAT WALK COORD 2 24 27 28 28 29 30 The Friction Level Introduction 32 Entering the platform 33 Anti-Slip Strap Introduction First Steps ‒ How to walk? DISASSEMBLY & MAINTENANCE Disassembly Procedure Component Maintenance APPENDIX Optional Accessories List Contact Information 32 36 37 37 38 39 04
First & Foremost This owner’s manual contains all the information you need to install your KAT Walk Coord 2. The following symbols are used to indicate important information and instructions for the device set-up process: This symbol is a precaution, it usually provides additional information to help you with a task, as well as information that applies only to certain situations. This symbol is a hint, letting you know what might be helpful at a particular point.
This device is intended for use by healthy people aged 14 to 60, who are between 1.55m/ 5'1" and 2m/6'7" of height (recommended 1.60m/ 5'3" to 1.95m/6'5”) and weight below 130kg (286 lbs). Do not use the KAT Walk Coord 2 if you do not meet the age, height or weight requirements, or if your physical condition does not allow for moderate to intense physical activity. If you are uncertain of your health condition, please consult your doctor first.
(3)Exhibition booths made of glass or those that are incapable of meeting the weight support requirements; (4)Near firefighting equipment or safety exits, etc. If you need to change the location after completing the assembly and installation, be sure to disassemble the device in strict accordance with the components order, use the same material as the original packaging to wrap the device, and choose a high-quality logistics or handling company for the device transportation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B). IC STATEMENT: This device complies with Industry Canada licence-exempt RSS standard(s).
Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. Dispose of used batteries according to the instructions.
If you experience the following symptoms when using the device, stop doing it immediately: (a)Seizures, loss of consciousness; (b)Eye fatigue, eye muscle twitching, blurriness or other visual abnormalities; (c)Body balance or hand-eye coordination problems; (d)Lethargy, nausea, excessive sweating, or any symptoms indicating motion sickness. Symptoms caused by virtual reality may persist and become more apparent in a few hours after use.
Product Appearance KAT Walk Coord 2 KAT Walk Coord 2 Plus KAT Walk Coord 2 Dedicated Shoes Introduction KAT Dedicated Shoes The KAT Walk Coord 2 dedicated shoes are a special, friction-customizable footwear designed to be used with the KAT Walk Coord 2.
KAT Walk Coord 2 Foot Sensor Introduction The KAT Walk Coord 2 Foot sensors are mounted on the bottom of the special shoes and serve the purpose of physical movement translation into movement in VR to ensure a highly accurate simulation of walking in any direction. Foot Sensor Model WK321 Battery 3.
3.Charging: Lights flickering on left and right sides. Charging State Detected: Continuous bright lights and immediately turn to blink at same frequency (with interval of 0.5s). ; 4.Normal operation:Normal, lit light;Low battery: Slow flashing light (3-sec. intervals); 5.Unpaired connection:Flashing light (1-sec intervals) ; 6.Pairing:Quick flashing light (0.5-sec intervals) ; 7.Sleeping mode / No power: No light. Product Parameters Suitable age 14-60 years Supported height 1.55m-2.
Product Installation Incorrect installation of the KAT Walk Coord 2 may lead to safety hazards. Before proceeding with the installation, read carefully the following instructions: Precautions Tools preparation Before unpacking, prepare your own scissors. Avoid wearing slippers, high heels or other shoes unsuitable for physical work. Please, keep in mind that the gross weight of the device may exceed 68 kg. Ensure sufficient help of others to avoid injuries during transportation.
01 02 Stabilizing feet box 03 Sensor charging cord Rods Base plate USB cable Waist harness box Tool box Power cord(C2+) Sensor box Back support box Remove the covers. Items in the Find protective gloves in the tool Take out the base (39kg)and place the picture. out all the other boxes as shown. facing the computer. Connect the box should be organized as in 04 box and put them on, then take Refer to the packing list for details.
175 (5'9") 11 10 12 3 2 185(6'1") 1 Locate the height indicator on the Pull out the safety pin, step on your body height. When mounting Mount the support plate on the back support corresponding with the device, push forward and firmly pull it down to ensure it reaches the lowest position in the socket. 13 Ensure the harness logo faces the platform facingthe rods. screwdriver, then tighten the upper bolts of the connecting safety pin back completely. plate (According to your height).
Packing List Before assembly, check carefully whether the quantity and type of tools and accessories is consistent with the below list. If anything is missing, contact our customer service at service@katvr.com before you proceed.
Maintenance Oil 18
Reminder: Base Surface Lubrication oil:The Lubrication oil is not for daily use and is not recommended to new users of the device. Use only if the VR EXPERT level of shoe friction is not enough for you. Method of use: One drop is enough. Spread evenly on the surface using dry cloth. Installation of the HMD wire pulley (Giveaway) : 02 01 03 PUSH Drill a hole in the ceiling about 1m (horizontally) away from the center of the treadmill. Place Mount the hook into the expansion screw sleeve and tighten.
Through KAT Gateway, you can achieve real-time control over your KAT Walk Coord 2 with all of its settings as well as quickly adapt the device to all supported content. With SteamVR you can operate the device without taking off the VR headset or leaving the platform. Note:KAT Gateway supports active recognition of all the supported content whether launched through steamVR or directly through the game exe files. KAT Gateway VR-Integrated dashboard can be only accessed through SteamVR.
Download KAT Gateway and install it on your PC KAT Gateway functions introduction Device Detection: KAT Gateway will detect all the currently connected KAT Devices but can only run one at a time. If no device or multiple devices are detected, KAT Gateway will inform the user about it and ask to connect only the intended device.
Second case - Multiple devices of the same model detected 22
Third case - Multiple devices of the different model detected. Please select the "KAT Walk Coord 2". Sensor Pairing Connect the USB data cable of the KAT Walk Coord 2 to the PC USB port. Once the below window appears, the treadmill pairing is complete. Click“NEXT”and use the micro USB wire from the KAT Walk Coord 2 sensor kit to connect the foot sensors to your PC. Follow the software instructions and click“FINISH”to complete the sensor pairing.
Having connected the KAT Walk Coord 2 to the computer, follow the Gateway instructions. Using the Micro USB cable, connect the sensors one by one to pair them.
Having connected the KAT Walk Coord 2 to the computer, follow the Gateway instructions. Using the Micro USB cable, connect the sensors one by one to pair them.
Device Status KAT Gateway dashboard once KAT Walk Coord 2 is connected: Home page of KAT Gateway displays the current device connection status: -Headset direction; -Connection status and direction of the waist sensors; -Connection status and direction of the left foot sensor; -Connection status and direction of the right foot sensor; -Current locomotion mode.
-Adjustment of the mapping speed; -Adjustment of the walking accuracy; -Enabling the continuous movement mode. -Enabling the haptics module vibration; -Adjustment of vibration intensity and test.
-View the current game; -Switch between 4 different vehicles; -Turn the Sit-walking on and off;Adjustment of speed. The LED is the brightest by default, you can use the gateway to adjust the brightness or turn it off. -Adjustment of the LED and LED brightness.
Game Configuration In the Game Configuration page, you can view the list of supported games including the recommended and manually added ones, as well as check and modify their configuration settings. Adding a game: Fill in the Steam ID of the game or choose the game EXE file.
Adding a new configuration (through manual input or by file import): Deleting the game: View, select or delete the configuration files.
In the recommended games page, you can view the popular games, check whether the game is currently installed on your PC or proceed directly to the Steam Store page to purchase it. System The system settings page shows the currently selected language and the current inSteam driver and KAT Gateway versions.
The device manager page shows the status of each sensor and the SN of the device. Through this page, you can initiate the sensor pairing process Direction calibration: a. First press the System Button on your hand controller to enter KAT Gateway. Select the loco- motion mode in KAT Gateway and start the game (More about the modes in the KAT Gateway software introduction below). b.
c. Sensor parameter adjustment When in the game, you can adjust a number of KAT Walk Coord 2 parameters such as the movement sensitivity or the special actions(Strafing, Backward, Cruise). Note: If you experience problems with the walking direction, check if the waist harness is fastened correctly and carry out the direction calibration.
The Room Settings of the HMD have been modified. Before calibration, ensure that the room settings of your headset have been successfully set and the sensor initial pairing has been completed. First Use of KAT Walk Coord 2 Sensor Installation The sensors should be mounted on top of the dedicated shoes. 02 01 Push Push 03 The paired sensor with L light on Insert the sensors into the sockets The sensors must be installed vice versa. shoes. Note: Before using the step.
Anti-Slip Strap Introduction: The anti-slip strap is located at the back side of the shoe. When pulled onto the shoe hill, it increases your stability and ensures you can get on and off the platform safely. Before getting on and off the platform, make sure the anti-slip lock on the shoe sole is enabled. Once you ' re on the platform with the waist harness securely fastened, you can unlock the anti-slip as shown in the picture below.
Entering the Platform: 01 Before getting on or when sensors 02 Hang the HMD and controllers enter sleep mode (inactive ≥ 30min), on the storage hooks. Ensure the shoes. Check the sensor light: and the base surface is clean. click the main button and shake the * Flashing:no connection Constant:successful connection None:sleep mode / no power. anti-slip protection lock is enabled Equip a pair of kneepads and step onto the platform. * supported weight: 130kg (286 lbs.
06 Disable the anti-slip lock. Lean forward a little bit till you start to feel the shoe wheels start rolling. Practice walking for a few minutes until you get used to the simulated gait. 07 Put on the HMD and calibrate - look forward and reach back to press the main button (repeat at any time If the walking direction is incorrect).
09 Charge the sensors as shown. * Flashing Shoe Sensor Light / Dimming Inner Sensor Light indicates charging. It may occur that the rotational structure gets continuously pulled towards a certain side of the platform due to uneven ground or other reasons. If that happens, please follow the steps below to adjust the device: a Loosen the nuts holding the waist harness.
01 02 Try to squat. When on the platform, try to take a few slow steps. 04 03 05 To trigger movement forward in VR, move your feet alternately. 06 Single-foot micro-operation can To trigger continuous movement in Pick the headset and controllers corresponding direction. stand still with one foot in the middle back of the device.
02 01 Charge the shoes sensors as shown in the figure, double Put the shoes on the base plate. 03 Charge the shoes sensors as shown in the figure,breathing light means charging. flashing means charging. When the charging cable is not in use, pay attention to storage and roll it up to prevent stepping on it. KAT Vehicle Hub - User Guide The Vehicle Hub can only be used with KAT Walk Coord 2, and other application is prohibited.
Installation Guide 01 02 II 03 2 Remove the hole plugs from the supporting rods. 1 Insert the bolts of the inner mount- ing plates into the rod holes from inside out. Then, align the openings Push the cover down to open it and install the AA battery. of the outer mounting with the bolts and tightly fasten with a hexagon key.
01 02 1 02 2 Grab the seat-rods and pull them down to unfold the seat module. It automatically retracts when you stand up. The Vehicle Hub is off by default. Long-press the module button for 1.2s to turn on and off. Click to quickly switch between 4 types of vehicles: Auto / Mount / Aircraft / Heavy Vehicle Disassembly & Maintenance Component Maintenance: Before use, please check whether the surface of the laser head of the foot sensor is smooth and clean.
Component Maintenance: 1. Before use, always ensure that the platform is wiped clean and free of any objects, substanc- es or dust. Scratches on the platform surface are a natural result of wear and tear and will not influence the operation of the device. 2. Before use, always ensure that the soles of the dedicated shoes are clean and free of any substances or dust. 3. The use of the product may generate a little bit of static electricity.
Contact Information Company:Hangzhou Virtual and Reality Technology Co., Ltd Add:China, Zhejiang Province, Yuhang district of Hangzhou. Wen Yi Xi Lu,1818-2 China Artificial Intelligence Town, Building 6, 9th floor. Postal code:311100 Email:service@katvr.com Web:www.kat-vr.
www.kat-vr.