Specifications
936B226/D/1018 | Subject to change.
936B226/D/1018 | Subject to change.
KATHREIN Solutions GmbH, Kronstaudener Weg 1, 83071 Stephanskirchen, Germany
Phone +49 8036 90831-20 | Fax +49 8036 90831-69 | www.kathrein-solutions.com | info@kathrein-solutions.com
KATHREIN Solutions GmbH, Kronstaudener Weg 1, 83071 Stephanskirchen, Germany
Phone +49 8036 90831-20 | Fax +49 8036 90831-69 | www.kathrein-solutions.com | info@kathrein-solutions.com
RAIN RFID Reader Systems | Page 1 of 4
ARU 2400 | ARU 2401 Antenna Reader Unit
RAIN RFID Reader Systems | Page 2 of 4
ARU 2400 | ARU 2401 Antenna Reader Unit
PRELIMINARY
PRELIMINARY
The Kathrein ARU2000 reader family is a basic RAIN RFID reader with an inte-
grated antenna for indoor applications in logistics, manufacturing and supply
chain applications.
Its best in class 30-dBm UHF RF unit and connectivity interface PoE and the
basic level processing unit allow for a flexible integration into Industry 4.0 and
IoT solutions.
Based on the latest RFID standards, such as EPC Gen2v2/ISO 18000-63,
Kathrein ARU2000 series support all market leading transponder chip features.
The ARU 2401 is the version for countries where FCC rules apply.
Type
ETSI Version
ARU 2400
FCC Version
ARU 2401
Order number 52010348 52010664
RFID
Frequency range [MHz] 865–868 (865–867 for India) 902–928
Impedance antenna port [Ohm] 50
Max. TX power conducted
[dBm] 30 30
Max. TX power radiated [ERP (ETSI)/
EIRP (FCC)]
30.25
32.5
RX sensitivity [dBm] typ. –70
Number of antenna ports 3, Fakra connector, Z-coded
Standards EN302208-2 V2.1.1 FCC Part15, UL
Antenna
Half-power beam width [°] 60
Gain, circular [dBiC] typ. 5.5
Voltage
Local supply [VDC] +10 to +30
Connector printed circuit-board connector, 2-pole, screw connection with tension sleeve
Remote-fed [VDC] PoE Class 0 according to 802.3at (10–57)
Connector RJ45, 8-pole
Power consumption
Local supply [W] 5.7
Remote-fed [W] 6.7 – PoE Class 0 (12,96W)
Ethernet
Number of Ethernet ports 1
Data rate [Mbit/s] 10/100
Connetor RJ45, 8-pole
©KRAI
Supply voltage (output) [V] 5
Max. current per port [mA] 100
LED visualisation
Freely programmable Basic LED
General Specifications
▪
RAIN RFID reader with embedded computing module
▪
easy to install due to open connectors and FAKRA antenna sockets
▪
ready for shelf mounting with ITEM
▪
60° antenna integrated
▪
3 antenna ports
▪
+27 dBm port power
▪
@KRAI antenna support
▪
GPIO: 2 inputs, 2 outputs
▪
PoE
▪
basic LED visualisation
▪
IP40 indoor use
▪
type approval for Europe, US and RoW
▪
Manufacturing and Automotive
▪
Logistics
▪
Track & Trace
▪
eKanBan
▪
Healthcare
300
22,5
49
300
100
100
M6
100
100
230
24 M4
268
PWR
Ethernet
GPIO Antenna 2
Antenna 3
Antenna 4
Features
Dimensions [mm]
Risk of material damage!
► Make sure that the depth at
which the screws are put into
the housing of the reader
does
not exceed 10mm
(the tightening torque is 5Nm).
Note
Risk of material damage!
► Make sure that the depth at
which the screws are put into
the housing of the reader
does
not exceed 10mm
(the tightening torque is 5Nm).
Note
Key Applications