4.6 GPO Functions Readers with GPO functionality’ offer the possibility to set up small controls which trigger the reader, for Instance by means of a light barrier, or which trigger an action at the outputs of the reader by reading specific tags. Such an action can switch an output to control the flow of goods. The GPO tab allows the reader to interact with its environment. The GPO function tab allows the user to manually read or switch inputs and outputs of the respective application.
Liberating the Reader Using the Reader Start Software (B) Last antenna the last antenna for the selected function (@ Turk-off time sets the time for how long the output is on for the Tag found and Tay operation successful function Get reads the current 10 configuration settings Sat dais the output settings 14.6.2 Test Input and Output MSO J ai S sen naan: gen” Pim Fig.
14.6.3 Action List and Assign Input to Action List To automate the processes, it is possible to store command sequences on the reader in the form of action lists. These ara triggered by a change of edge at the selected input. Fig. 54: GPO: Action List and Assign Input to Action List Action List Each input channel! has two configuration parameters available: (1) Action list selects an action list (0-127) from the drop-down menu to save the action in selects an action from the drop-down menu, e.g.
Liberating the Reader Using the Reader Start Software Tin Pf vou would like to assign the action Ist to both the rising and the falling ade, click Ass ib sing age ane then Passion to falling sds To capon the assignment.
Get 0101 first» The example above shows the Activate buzzer 500 ms and Get PCs actions. 14.7 Expert Settings 1 The Reader Start software is a powerful tool for the reader configuration. It allows the reader to be customized to any application.
Liberating the Reader Using the Reader Start Software selects the antenna type between per-defined and custom antennas @ Antenna type If the per-defined antenna is selected, the programmer sets the antenna gain to the maximum value permitted for this antenna. If Custom antenna is selected, it is possible to freely set the gain and power, & Gain selects the antenna gain between -32.00 Bic and 31.
14.71 Port Power in Europe, the radiated power is limited in accordance with ETS! 302208 to 2 W ERP. in the FCC/C region, max. 1W connected RF power applies with an antenna gain of 6 dBi. if the antenna gain is greater than 6 dBi, iris necessary to reduce the RF power accordingly. While the European standard refers to a half-wave dipole, FCC part 15/RSS 210 refers to an isotropic radiator.
Liberating the Reader Using the Reader Start Software 14.8 Expert Settings 2 The Expert settings 2 tab Is divided into four sections for further configuration of the reader. In this tab, it Is possible, for example, to change the default parameter set, copy one parameter set into another, read reader parameters to deter mine their ID and configure Select Filter Settings. San = mare, Tr [rein 5 i £7 Fig. 57: Expert settings 2 14.
14.8.3 Change Reader Parameter Change reader parameter allows to change a! reader settings using their respective configuration IDs. nn: Ftv Fig. 59.
Liberating the Reader Using the Reader Start Software 0 Mask date sets the data to be filtered a Get reads the data of the filter selected sets the select filter In In Generation 3 radars, se sot filter data are permanently stored in the reader a. if the select tier bas een activated, It 1s active alter a reader restart. 14.
i Goi Re Sie RE | di CECA HS Ride | Halal Boris Wii => The reader only reads the tags with the filtered value (marked green). The tag without the filtered value is not read (marked red}. 14.9 Test Gen 2 Functions This tab makes it possible to access individual tag functions. In addition te the functionality in accordance with the EPC Gen standard, it is possible, for example, to read and write tags as well as set and change tag passwords.
Liberating the Reader Using the Reader Start Software shows the information about the tag manufacturer and the chip type B+ Click on the information symbol. =» The information about the tag is shown: @ Info N ris wd (1) Fig. 64: Testament: password for operation (1) | Passion sets the password for the tag operation in the hexadecimal format 14.9.3 Write EPC ini this tab, it's possible to change the EPC of the tag.
14.94 Read Data This group supplies detailed access to all the data areas of the tag. Access is obtained by entering the selected memory bank, the address within the memory bank and the number of words. psy Bear fission give stat gs, | | Inalienability greenery ini oF of sees Alliterated Fig.
Liberating the Reader Using the Reader Start Software a 14.95 Write Data Memory bank enters the selected memory bank Memory address enters the address within the memory bank Data enters data to write in the hexadecimal format enters data to write in the OUTFIT format Data mask enters the data mask The data mask slows only individual! bits on the tag to be changed.
14.96 Change Password To change the password, enter the current password at @ in Fig. 64, p. 100 If no password has yet been set, the default valuates 0.
Liberating the Reader Using the Reader Start Software 14.97 Lock The EPC Gen? standard provides security mechanisms for the tag data areas. This a/lows individual memory areas and functionalities of the tags to be provided with a password to protect it against access and/or changes. Under Lock, it is possible to lock the memory banks.
locks all the tags with the settings from @ alligators f Ie To lock oll the tags. aka sure that al the tags have the same password. a 14.9.
Liberating the Reader Using the Reader Start Software 14.10 @KARI This tab allows changing KRA specific settings. The @KRA! tab is divided into several sections. Port and Port Info are always available, other sections depend on the antenna connected to the reader, e.g. Appellation, Direction etc. The Reader recognizes the connected antennas at boot up, but it is also possible to manually recognize a sings port or all ports under Port. Port info displays the information about the antenna. Fig.
14.101 Polarization gio bitten HR ic Tendinitis 9 1 Shoe $9 Fig. 72 @HANDRAIL polarization sets the polarization of the antenna ® If there are several types of polarization selected at the same time, the antenna configuration changes after every inventory. @ Got polarization | reads the current polarization information of the antenna (3) Set polarization sets the polarization on the antenna 1410.2 LED Depending on the features that are integrated in the antennas, it is possible to control/configure the LED.
Liberating the Reader Using the Reader Start Software 1410.3 Jumper Cable Attenuation Fic Fig. 74: @KARI jumper cable attenuation o Get jumper cable attenuation ® Set jumper cable attenuation reads the current Jumper cable attenuation chats the jumper cabs attenuation For cascading smart shelf antennas, It 1s necessary 1o use cables with the same attenuation (cable sooth) Otherwise, the TX power of the antennas that is derived from the jumper cable attenuation 1s not callous std B corrector. 14.
14.11 App Manager instructions. e ® For moral Information on how fo operate an spn, refer fo the tse: guide for the corresponding app. f This chanter gives a short overview of the apps, the requirements to operate therm and the installation 14.111 Currently Available Apps Manageress Automated vehicle identification (AV) is one of the key markets that Kathrine Solutions is focusing on. AV] includes free flow identification, plaza and parking applications.
Liberating the Reader Using the Reader Start Software 1411.2 Installing an App This chapter describes installing an app shown on the simplex of Manageress You cen install all other apps following the Instructions described be ow. The Deerstalker software is installed. ¥ The reader is connected iia] 4 | Fig. 76: App Manager: installing an app Go to https/Awww threatening-solutions comvproducts/software/interface software/accessmanager Download the app.
14.12 Tag Scan To represent the relationship between the tag phase and the RSFSR value, it Is possible to plot both values by means of the Tag Scan. ¥ There is only one tag in the field or a tag has been selected. Be Click Start to activate the Tag Scan. => The phase shifts are Sean in the frequency switching. The RSS! value does not change because the transponder {tag} is not moved. Fig. 77.
Liberating the Reader Using the Reader Start Software Transponder movement is indicated by the amplitude of the phase. The RSS! value changes in small steps. The direction of the movement is indicated by means of the rotating pointer. Fig.
14.13 Spectral Scan It may happen that the RID transmission to or from the transponder is disturbed by frequency interfering. Spectral Scan shows a qualitative frequency spectrum. Due to the fact that it 1s received by means of the connected RID antenna, the frequency assignment on location is made visible. Fig. 79.
Liberating the Reader Using the Reader Start Software 14.14 Authentication Using this function, it is possible to authenticate a tag. The Authentication tab consists of 4 areas, Get All Tags, Tags, Key and functions that are described below. Ee Sade Sask (5) Fig. 80: Authentication (1) | Password enters the access password; see Password for Operation, p. 100 @) tot all tags reads ali the tags in the antenna field ® mg shows all the detected tags @ Key see Kay, p.
1414.2 Functions NXP CODE DNA uo L Kop op wi Cereals BRIE * COORDINATORS wore Fig. 82: Authentication: NXP CODE DNA (1) Got hey reads key 0 or key 1 currently set in the selected tag; only if the key has not been activated @ Se they sets key 0 or key 1 on the selected tag (3) Activist key activates key 0 or key 1 on the selected tag Untraceable [Demeter SE eer RUE * sense § Fig. 83: Authentication: untraceable @ asserts or desserts U In XPC_WY; see Ecological Gen? Specification, p.
Liberating the Reader Using the Reader Start Software selects a range Normal the tag operates in the normal range Range The tag temporarily toggles between normal and reduced operating range Toggle temporarily but reverts to its prior persisting operating range when the tag loses power Reduced the tag operates in the reduced operating range Set Untraceable : @ on selected tag sets settings 1-6 on the selected tag TAME TAM? 1s used to check whether the selected tag is authentic.
TAM TAM is used to read the data of the selected tag. ¥ Hey Thad been activated. X87 i Cops BEE “ Sp Bus Fig.
Waste Disposal Electronic equipment is not domestic waste In accordance with directive 2002/98/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27th January 2003 concerning used electrical and electronic appliances, it must be disposed of properly. At the end of its service [ife, take this unit for disposal at a design anted public collection point.
Electronic equipment is not domestic waste In accordance with directive 2002/38/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27th January 2003 concerning used elev trial and electronic appliances, it must be disposed of properly. At the snd of its service life, take this unit for disposal at a designated public collection point. nti oo lane si LL INR Tinsel Sling eon LORAINE | Dubs bo changes Infiltrator Substitution Gm, Hohenstaufen: Wen 1 83071 Uncharacteristic.