MOD153 2.
MOD153 TRANSCEIVER INDEX DESCRIPTION........................................................................... 2 OPERATION .............................................................................. 2 INSTALLATION ......................................................................... 3 BEFORE APPLYING POWER!...................................................... 4 TROUBLESHOOTING ................................................................. 5 TRANSCEIVER PICTORIAL ................................
MOD153 TRANSCEIVER frequency synthesizer, a power DESCRIPTION The MOD153 sequence is a spread amplifier, a modulator and a direct receiver spectrum transceiver module designed to free use in the 2.4 GHz ISM the The transmit be used simultaneously to circuitry. The RF section runs on the 3.3V supply. The MOD153 is Direct Sequence is a Spread Spectrum that can use radio one 16 1 channels, is integrated 2 where 2.405GHZ Channel 16 is 2.480 GHZ.
MOD153 TRANSCEIVER The receivers are matched to C) The antenna should be the transmitters to use the same mounted at least 20cm channel from as the transmitter’s all persons, and signals. must INSTALLATION simultaneously with any 1) Solder the other MOD153 transceiver directly to the host’s compatible connector. not transmit antenna or transmitter, except accordance with in FCC multi transmitter product 2) Print and attach the label procedures.
MOD153 TRANSCEIVER c. The “Industry Canada Statement”. d. Include in the manual, “This device is granted for use in Mobile only configurations which used the antennas for transmitter in must this be installed to provide a separation distance of at least 20cm from all person and not be colocated with any other transmitters except in accordance with FCC and Industry Canada multi-transmitter product procedures.” BEFORE APPLYING POWER! x Check power and ground for proper polarity.
MOD153 TRANSCEIVER TROUBLESHOOTING There are no user serviceable parts in the MOD153 Transceiver. Contact your representative KAR-TECH for further instructions or servicing. There are no user-serviceable parts inside the transmitter or the receiver. Return the units for service. The information, specifications, and illustrations in this manual are those in effect at the time of printing. We reserve the right to change specifications or design at any time without notice.
MOD153 TRANSCEIVER TRANSCEIVER PICTORIAL TRANSCEIVER Power supply ........................................................................... 3.3VDC Operating temperature - Radio....................................... -20˚C to +55˚C Storage temperature .................................................. -40˚C to +100˚C RF Frequency ............................................................... 2.405-2.48 GHz Antenna Manufacturer …………………………………………………………….. Kar-Tech, Inc.
MOD153 TRANSCEIVER INSTRUCTION TO THE USER This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
MOD153 TRANSCEIVER be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.
MOD153 TRANSCEIVER INDUSTRY CANADA STATEMENTS This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
MOD153 TRANSCEIVER OEM Responsibilities to comply with FCC and Industry Canada Regulations This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada .
MOD153 TRANSCEIVER 1. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. 2. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada .
MOD153 TRANSCEIVER EUROPE CE NOTICE This device has been tested and certified for use in the European Union. See the Declaration of Conformity (DOC) for specifics. If this device is used in a product, the OEM has the responsibility to verify compliance of the final product to the EU standards. A declaration of Conformity must be issued and kept on file as described in the Radio and Telecommunications Terminal Equipment (R&TTE) Directive.