MCT245 2.
MCT245 RECEIVER INDEX DESCRIPTION ........................................................................... 2 OPERATION .............................................................................. 2 INSTALLATION ......................................................................... 4 BEFORE APPLYING POWER! ...................................................... 5 TROUBLESHOOTING ................................................................. 6 TRANSCEIVER PICTORIAL .................................
MCT245 RECEIVER DESCRIPTION The MCT245 hopping is a OPERATION frequency spread spectrum The MCT245 is transceiver unit, designed to be Receiver product compatible with US (FCC Part GHz 15.247), Canadian (RSS-210), Receiver EU(EN 60950-1, EN 300 328, EN includes a 301 fully integrated 489) and Australian() ISM a for radio the bands. 2.4 The microcontroller CPU, GPI/O, a frequency regulations for license free use synthesizer, a power amplifier, in the 2.4 GHz ISM band.
MCT245 RECEIVER circuitry. The RF section runs on construction the 3.3V supply. other similar equipment. The MCT245 Hopping uses Frequency Spread channels for that uses 16 any mode, hop Spectrum between 2.407GHZ and 2.470GHZ, with 1MHZ resolution. The receivers are matched to the transmitters to use the same channels and sequence as the transmitter’s signals.
MCT245 RECEIVER INSTALLATION 1) Attach the external harness to the MCT245. 2) Assemble assembly the MCT245 into the Enclosure. 3) Place a label on the outside of the enclosure on the side.
MCT245 RECEIVER b. The Application Requirements: “Instructions To The User” section. c. The “Industry Canada A) Power the MCT245 Receiver with 9-30VDC voltage, Statement”. nominal with d. Include in the manual, peak “This device is granted current draw of 150mA. for use in Mobile only B) Assemble the MCT245, into a KAR-TECH Receiver configurations enclosure. C) The which MCT245 is to used be the in antennas for installed only in mobile transmitter applications.
MCT245 RECEIVER Read the rest of this manual. TROUBLESHOOTING There are no user serviceable parts in the MCT245 Receiver. Contact your representative KAR-TECH for further instructions or servicing. PARTS LIST PART NUMBER 022081A DESCRIPTION MCT245 RADIO TRANSCEIVER – REMOVEABLE ANTENNA There are no user-serviceable parts inside the transmitter or the receiver. Return the units for service.
MCT245 RECEIVER SPECIFICATIONS Equipment Class .............................. Part 15 Spread Spectrum Transmitter FCC ID ............................................................................. P4U- MCT245 ICC (Industry Canada Certification) ID .............................. 4534A- MCT245 TRANSCEIVER Power supply ......................................................................... 9-30VDC Operating Current ........................................................................
MCT245 RECEIVER INSTRUCTION TO THE USER This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
MCT245 RECEIVER FCC Radiation Exposure Statement The product can be installed or integrated in mobile or fix devices only. This product cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden. This product complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
MCT245 RECEIVER INDUSTRY CANADA STATEMENTS This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
MCT245 RECEIVER OEM Responsibilities to comply with FCC and Industry Canada Regulations Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada .
MCT245 RECEIVER When the product is installed inside another device, the user manual of this device must contain below warning statements: 1. This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. 2. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada .
MCT245 RECEIVER EUROPE CE NOTICE This device has been tested and certified for use in the European Union. See the Declaration of Conformity (DOC) for specifics. If this device is used in a product, the OEM has the responsibility to verify compliance of the final product to the EU standards. A declaration of Conformity must be issued and kept on file as described in the Radio and Telecommunications Terminal Equipment (R&TTE) Directive.