MCT242 2.4GHz MICRO TRANSCEIVER The information, specifications, and illustrations in this manual are those in effect at the time of printing. We reserve the right to change specifications or design at any time without notice. Kar-Tech, Inc.
.4GHz Macro transceiver DESCRIPTION The MCT242 is a direct sequence spread spectrum transceiver unit, designed to be compatible with US (FCC Part 15.247), Canadian (RSS247), EU(EN 60950-1, EN 300 328, EN 301 489) and Australian(AS/NZS 4268) regulations for license free use in the 2.4 GHz ISM band. The MCT2412 is designed for mobile applications in accordance to Part 2.1091(b).
2.4GHz Macro transceiver The MCT242 is Direct Sequence Spread Spectrum that can use one of 16 channels, where Channel 1 is 2.405GHZ and Channel 16 is 2.480GHZ.
2.4GHz Macro transceiver TRANSCEIVER PICTORIAL SPECIFICATIONS Description: Before staring the test, charge the transmitter fully using the standard Micro USB charger. Press power switch to turn transmitter on. To Power ON: Press and hold the POWER switch for about 2 seconds, until red and green light starts to blink. To Power OFF: Press and hold the POWER switch for about 2 seconds, then release. Both lights will be off. TRANSCEIVER Power supply ...........................................................
2.4GHz Macro transceiver FCC Statement FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
2.4GHz Macro transceiver IC Statement This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada.
2.4GHz Macro transceiver FCC and IC SAR Statement This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC/IC) is 1.6 W/kg averaged over one gram of tissue.