Kapsch TrafficCom AG User Manual Onboard Unit Programming Station OPS-9955 This device is based on the IEEE WAVE Standards 1000005508-Bed-02
Document number 1000005508 Document type Bed Document version 02 Document status released Date of release 2010-04-21 Valid from Software version - Created by: Batko Manfred Checked by: Povolny Robert Approved by: Dreschl Werner Disclaimer and Limitation of Liability The products described in this manual are provided “as is” and without any warranties of any kind, either express or implied.
User Manual | Onboard Unit Programming Station OPS-9955 Page 3 of 19 Table of Contents Page Information about this document 5 Text conventions ............................................................................................. 5 Important text elements ................................................................................... 5 Abbreviations ...................................................................................................
Page 4 of 19 User Manual | Onboard Unit Programming Station OPS-9955 List of figures Figure 1 System overview ............................................................................ 10 Figure 2 Onboard Unit Programming Station OPS ...................................... 12 Figure 3 Connectors on the OPS ................................................................. 12 Figure 4 HMI Interface on the OPS .............................................................. 13 Figure 5 OPS connecting scheme .
User Manual | Onboard Unit Programming Station OPS-9955 Page 5 of 19 Information about this document Audience This document is for professionals setting up and maintaining the equipment. Professionals are persons, who have basic knowledge on software installation and computer networks. Preparations This User Manual shall be carefully read before installation. Text conventions Visual aids and standard text formats in this manual help the reader to locate and identify information easily.
Page 6 of 19 User Manual | Onboard Unit Programming Station OPS-9955 Abbreviations Table 1 Abbreviations and definitions DSRC Dedicated Short Range Communication GUI Graphical User Interface OBU Onboard Unit (adjustable by user) OPS Onboard Unit Programming Station RF Radio frequency WAVE Wireless Access in Vehicular Environments 1000005508-Bed-02
Regulatory Information Page 7 of 19 Regulatory Information Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Notice 1. This device may not cause harmful interference, and 2. this device must accept any interference interference that may cause undesired operation. received, including Changes or modifications made to this equipment not expressly approved by Kapsch may void the FCC authorization to operate this equipment.
Page 8 of 19 User Manual | Onboard Unit Programming Station OPS-9955 Software Licenses This product may contain software portions including technologies used under third party license, and are copyrighted. Notices, Terms and Conditions pertaining to third party software are located at http://www.kapsch.net/us/en/ktc/portfolio/products_and_components/Pa ges/default.aspx Safety Instructions Warning: This device is used with an external power supply, which is connected to 110-230V AC power.
General Information Page 9 of 19 General Information Definitions Integrator Operator Customer Point-of-Sale Terminal The integrator is responsible for technical integration of the OPS-9955 into a point-of-sale infrastructure defined by the operator. The operator defines the process of handling OBUs in the point-of-sale infrastructure and the use in the particular system configuration. The customer has a commercial contract for the offered services.
Page 10 of 19 User Manual | Onboard Unit Programming Station OPS-9955 System Overview A typical point-of-sale installation consists of the OPS-9955, a Point-of-Sale Terminal and auxiliary equipment which depends on the needs of the operator. The Point-of-Sale Terminal is a PC which is connected to a network infrastructure in most system configurations. The OPS-9955 is a communications device for data exchange between the Point-of-Sale Terminal and the OBU according to the WAVE standards.
System Overview Page 11 of 19 Anti-slip protection Easy to clean Functional details The generic programming capability gives the integrator the flexibility to have nearly full access to all information stored on the OBU.
Page 12 of 19 User Manual | Onboard Unit Programming Station OPS-9955 Installation and Operation Figure 2 Onboard Unit Programming Station OPS Status LEDs 1. Mounting 2. Connecting Recessed grip Connectors Place the OPS on a desk or other flat surface in a horizontal position. Connect the OPS to the Point-of-Sale by using a RJ45 cable. Connect the external power supply to the OPS. Connect the external power supply to the 110VAC - 230VAC outlet.
Installation and Operation Page 13 of 19 Figure 4 HMI Interface on the OPS 1 2 3 Table 3 HMI Interface No. Name Description 1 Power LED (green) After connecting the power supply of the OPS to AC power, the Power LED is illuminated GREEN continuously. 2 Programming LED (orange) After the OPS is initialized and the lid is closed the Programming LED is illuminated continuously ORANGE. After successful personalization of the OBU the Programming LED flashes until the lid is opened.
Page 14 of 19 4. Start-up User Manual | Onboard Unit Programming Station OPS-9955 The OPS is ready for personalization, if the orange LED lights continuously. (If not see section Fault Diagnosis, page 16). Note: The lid of the OPS must be closed. 5. OBU Positioning Open the lid by pushing the lid slightly at the grip in front of the OPS. Place a packed or unpacked OBU as shown in Figures 7 – 10 in the OPS.
Installation and Operation Page 15 of 19 Figure 9 Incorrect positions of unpacked OBUs Close the lid of the OPS and start the personalization procedure. Note: Do not open the lid during personalization procedure or the personalization will be canceled. 6. End of personalization 1000005508-Bed-02 After a successful personalization the orange LED starts flashing. Open the lid of the OPS and remove the OBU Close the lid of the OPS.
Page 16 of 19 User Manual | Onboard Unit Programming Station OPS-9955 Fault Diagnosis Problem Cause Repair Power supply plug from the external power supply is not connected to a live AC outlet Connect the power supply plug from the external power supply to a live AC outlet.
Product Specifications Page 17 of 19 Product Specifications Mechanical data Dimensions [LxWxH] 11.8 in x 7.8 in x 6.3 in (300 mm x 200 mm x 160 mm) Electrical data Environmental conditions Weight 10.4 pounds (4.7 kg) Power supply External power supply 12VDC / 2A Power consumption (operating mode) max. 24W Temperature (operation) -5°C … +50°C typ. 2.
Page 18 of 19 User Manual | Onboard Unit Programming Station OPS-9955 Conformity Standards Table 4 Standards Ref. Standard Description [1] ASTM E2213 – 03 Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications [2] IEEE 802.
Conformity Address Page 19 of 19 For further information please contact Kapsch TrafficCom. Kapsch TrafficCom U.S. Corp. 21515 Ridgetop Circle, Suite 290 Sterling, VA 20166 Phone: +1 (703) 885 1976 Kapsch TrafficCom AG Am Europlatz 2 A-1120 Vienna Phone: +43 (0)50 811 0 Fax: +43 (0)50 811 2589 E-mail: kapsch.at@kapsch.
