User Instructions

Table Of Contents

Kapsch TrafficCom

TRP-8100 (TDMAv6) Interior Transponder

Mounting Instructions For Passenger Vehicles

The TRP-8100 transponder mounts in passenger vehicles on the windshield. LEDs on the side of the transponder

provide transaction feedback. Mount the transponder with the LEDs visible to the driver.

PAGE 1
EN Kapsch TrafficCom TRP-8100 (TDMAv6) Interior Transponder Mounting Instructions For Passenger Vehicles The TRP-8100 transponder mounts in passenger vehicles on the windshield. LEDs on the side of the transponder provide transaction feedback. Mount the transponder with the LEDs visible to the driver.
PAGE 2
Requirements > > > For reliable operation of the transponder, the vehicle must be equipped with only one transponder while passing through a toll facility. Other transponders present in or on the vehicle must be switched off or enclosed in an RF shield. The mounting location must provide direct line-of-sight communication between the transponder and the toll facility overhead antenna. Apply Dual Lock™ Reclosable Fasteners in accordance with 3M™ document 70-0709-4029-4.