User Instructions

Janus
®
HOTPass
®
Interior Transponder
Mounting Instructions
The HOTPass
®
interior transponder mounts on the vehicle windshield. The preferred mounting
location is between the rooine and the rear view mirror post. If there is not enough room in the
preferred mounting location to accommodate the HOTPass
®
transponder, the transponder can be
mounted beside the rear view mirror post. The HOTPass
®
transponder is secured using 3M
™
Dual
Lock
™
fasteners.
Standard Toll Switch
HOV Lane Switch Position

with non-metallic roofs.

with windshields covered in RF-blocking material (ex. metal oxide).

with a metallic center windshield dividing post.

without center-mounted rear view mirrors.

Handheld mobile communication devices must not be located within
12 in. of the transponder.

Metal objects (except for the rear view mirror and the roof) must not
be located within 6 in. of the transponder.

HOTPass
®
transponders cannot be used where local regulations
prohibit mounting transponders on the windshield.

Apply Dual Lock
™
fasteners in accordance with 3M
™
document.
70 -0709-4029-4.
Requirements
WARNING: For safety purposes, select and move the
switch into the desired position and function only when
the vehicle is standing, parked or otherwise not in mo-
tion; failure to heed this warning may result in serious
injury or death.

For reliable operation of the transponder, the vehicle must be
equipped with only one transponder while passing through a toll
facility. Other transponders present in or on the vehicle must be
switched o or enclosed in an RF shield.

The mounting location must provide direct line-of-sight
communication between the transponder and the toll facility
overhead antenna.

Do not mount the HOTPass
®
transponder on vehicles:
Kapsch TracCom