Wireless Fast Charger WIFI Camera User Manual
1. Indicator status and corresponding mode: Blue light is power indicator:Always on when the power is turned on Red light is the wifi indicator,the corresponding mode is as follows: (1) Hotspot mode:Red light flashes slowly (2) WIFI mode(Remote mode):Red light is always on 2. Download and Install the APP. For iOS Devices: a. Scan below QR Code for iOS operating system to download and install “Lookcam” APP with iPhone or iPad devices. b.
3. Camera Setup and Wi-Fi Connection. A. Open the wifi Setting of your phone -->Click on LAN --> Choose and connect the name of hotspot signal named as: FXXXXXXXX (It was from camera ) B. After the connection is successful, go back to the APP C.
D. Click the setting button,choose the “Device setting”to select your router’s WIFI, input your WIFI password,then click ok to connect WIFI.
E. Waiting for the device reboot until the camera go online, then you can access live video and monitor your home anytime from anywhere by your phone. 4. Alarm Setting. Open the motion detection sensitivity and select the mode you want for warning mode. Alarm Schedule(Start Time)-(End Time),Warming tone.Alarm Interval(30-240 Second),Push Notifications,On-Screen Display. 5. TF Card Recording Setting. Click the Setting -->Device Setting,then select to make SD Card Setting.
6. Wireless Phone Charger Using Instructions. This device also can do fast charging for mobile phone with its charging pad, before use it to charge your phone, it has to be powered with a lightning USB or Micro USB cable & adapter or any power resource,when it was powered on, please put your phone on it for fast charging. Using Tips: 1 The charger pad do NOT share the power with the camera, it has to use 2 power source for them.
. Frequently Questions & Answers What micro SO card is required for recording? The camera supports up to 128GB micro SD card. Please use high speed class 10 FAT formatted memory card. Why can't i use my micro SD Card for recording? You must format the micro SD before using. If SD card is not recognized when inserted into camera just remove and re-insert. Why can't the camera go online? 1.The camera is far away from your router. 2.Check if your router is working properly or not . 3.Weak WiFi signal 4.