NOTEBOOK PC Foe gy DFC 3.0 1999 FCC ID: L4PK1100PX13 KAPOK COMPUTER CO.
OBIT D } FEDERAL COMMUNICATIONS COMMISSION NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Trademarks IBM PC, PS/2, EGA, and VGA are registered trademarks of International Business Machines Corporation. Intel, Pentium are trademarks of Intel Corporation. MS-DOS, Microsoft Windows, Windows NT and Microsoft Mouse are registered trademarks of Microsoft Corporation. Sound Blaster Pro is a trademark of Creative Labs, Inc. System Soft is a registered trademark of System Soft Corp. Other brand and product names are trademarks of their respective companies.
Warranty Provisions Keep the product’s bar code legible to protect your right for warranty services. The manufacturer warrants this personal computer to be in working order for a period of one year from the date of shipment. If this product fails within the one year warranty period the manufacturer will, at its option, repair or replace the product at no charge except as set forth below. Warranty service will be furnished on an exchange basis.
Safety Notice The notebook computer is a delicate device that requires careful handling. Negligence or mistaken use may cause serious damage. Before you learn to operate or use this computer, you need to understand the instruction regarding safety handling, : The following mentions the incorrect handling that is seriously inhibited. To keep the computer from being damaged, please keep these precautions in your mind. Do not turn off power in operation. Do not place the computer on unstable surface.
— Do not disassemble the compiler yourself. — Do not place anything heavy on the computer. — io Do not use broken power card. Keep the computer away. from any metal appliance. i | Do not throw the computer or accessories into fire.
The following mentions the actions that are important for your computer. To keep your computer in the most excellent condition, please follow the instruction as much as possible. If there is unusual odor, heat or smoke, Plug out the power cord ins attacking plug out the power cord immediately. peripheral devices, Follow the use instruction in taking Use the same brand of peripheral airplane. devices.
Maintain pour computer regularly. Do not place heavy thing on the power cord. Affix rape to the contact plate while putting the battery into keeping box. & = A Take a rest after a long term af work. Jig 5 a The data is easy ta lose in low power status, Please keep the computer away from humid environment.
Conventions This manual uses the following conventions to describe, identify, and highlight terms and operating procedures. Text Conventions Text in boldface contains messages that are important for safe operation. Please read. Characters in boldface represent specific items or keys, e.g. Card Bus, Fn key. File names are presented in bold capitals, e.g. /Pn.
Art Fmt sp A he dean Ergonomics Developing good work habits are important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. The following are some tips to reduce the strain: O Adjust the height of the chair and/or desk so that the keyboard is at or slightly below the level of your elbow. Keep your forearms, wrists, and hands in a relaxed position.
Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. O Position the display to avoid glare or reflections from overhead lighting or outside sources of light. Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly. O Position the display directly in front of you at a comfortable viewing distance. O Adjust the display viewing angle to find the best position.
Table of Contents Operating Environment Quick Start-up Powering the System. AC Power Adapter Battery Pack Inserting .. Removing Recharging by AC Power... Proper Handling of the Battery Pack Opening the LCD Cover LED Indicators on the LCD Cover .. Top-Front View LCD Panel... Stereo Speakers Track pad and Buttons Microphone. System Status LED Indicators . Power Button . Headphone Jack . Microphone-in Jack Phone Jack PS/2 Type Port Serial Parallel Port. External Monitor ( USB Port. Right-side View 3.
Right-side Stands Left-side View Ventilation... Chapter 2: Operation Upgrading Processor MONIQUE Replacing Processor Module Reinstalling Heat Sink Setting DIP Switch. Accessing the 2-Pole DIP Switch Expanding Memory Accessing the Memory Sockets Installing Memory Mosul Removing Memory Module Replacing Hard Disk Drive Using Floppy Disk Drive Inserting/Removing Diskettes ‘Write-Protecting Diskettes Do’s and Don’ts Using CD-ROM Removing CD-ROM Module Loading Compact Discs...
Removing PC Cards Using Hot Using Numeric Keypad TV LCD Panel. Using Power Management... Advanced Power Management (APM 1.2). Advanced Configuration and Power Interface Hard Disk Standby. Global Standby... Suspend and Resume . Powered On Suspend (POS) Resume from POS Mode. Suspend To RAM (STR) Resume from STR Mode Suspend To Disk Resume from STD Mode. Attaching Peripheral Devices . Attaching a Phone Line.. Attaching a PS/2 Keyboard or Attaching a Serial Mouse...
Initiating the System Configuration Utility Working with the Menu Bar of the SCU Working with the Pull-down Menu of the SCU Features of the System Configuration Utility . Startup Memory Menu Disks Menu... Components Menu Power Exit Menu. Chapter 4: Troubleshooting Battery. Power .. Hard Disk Drive. Floppy Disk Drive. 4-4 Hardware Installation 4-4 LCD 4-5 Memory Module .4-6 PC 4-6 Boot Password 4-7 Audio. CD... Printer. Chapter 5: Installing Drivers Preparation Installing Windows Drivers for Win.
1-1 Chapter 1: Getting Started This chapter provides a short introduction and tutorial that will familiarize you with the Notebook system and get you up and running quickly. This Chapter will discuss: Unpacking... .oeeurvreriesimmsrriccasnirsesnsemn rns Operating Environment . . Quick Start-up. Top-Front View Rear View Right-side View Left-side View. Bottom View...
Unpacking Carefully unpack the Notebook Computer and the included accessories (Figure 1-1). If there is any discrepancy or problem, contact your dealer immediately. Be sure to save the packing materials in the event that the notebook needs to be shipped at some point in the future. o Notebook Computer. Carrying Bag. Power Adapter. Power Cord. User’s Manual. PS/2 Transfer Cable. Battery Pack. Utilities Diskettes. CD for drivers.
1-3 Operating Environment As with any other precision electronic equipment, proper care and operation of your Notebook will provide long and reliable service. Be sure the computer system is not: Exposed to excessively heat or directly sunlight. Subjected to shock or vibration. Exposed to strong magnetic fields.
1-4 Quick Start-up Powering the System AC Power Adapter Use only the power adapter that comes with your Notebook Computer. System operation with an incorrect power adapter will cause damage to the Notebook and its components. Plug the power adapter to the DC-in socket on the left panel of the Notebook. Connect the power cord to the power adapter. Plug the AC power cord into a properly grounded outlet (Figure 1-3). Refer to Chapter 1, System Status LED Indicators for more information on system power status.
1-5 Battery Pack Power for continuous portable operation of the Notebook is provided by a battery pack. When using the battery no external power source is required. However, the actual operating time will be determined by the application used and the configuration set. Inserting 1. Turn the Notebook over. 2. Position the battery pack and firmly fit it into the Notebook (Figure 14). 3. The two latches will click into place when it is seated. Removing 4. Tum the Notebook over. 5.
1-6 Recharging by AC Power The system’s battery pack will recharge whenever the system is plugged into the AC power supply, regardless of whether the system is being operated or not. Please refer to Chapter 1, System Status LED Indicators for more information concerning battery charge status. Off-Line Charge The Notebook system is powered off. Connect the AC adapter to the unit. Its DC output will be used solely to charge the battery.
1-7 Opening the LCD Cover 1. To release the top cover slide the latch to the right (Figure 1-6). 2. Lift the top cover to reveal the LCD panel and keyboard (Figure 1-7). 3. Adjust the LCD panel to a comfortable viewing angle. 4. Press the power button to turn the system on or off (refer to Chapter 1, Top-Front View for the information of the power button).
1-8 LED Indicators on the LCD Cover Icon Color Description Green Battery power is used with system turned on. 0 Red AC power is used with system turned on or AC and Battery are used with system turned On. Green Battery is fully charged. G8 Red Battery is being charged. Blinking Red | Battery power is critically low.
1-8 Top-Front View LCD Panel The Notebook provides you with a large LCD panel. Depending upon the model you have purchased, it can either be a 14.177 13.3” XGA (1024x768 pixels) compatible, using TFT technology, or a 12.1” SAGA (800x600 pixels) compatible, using-DEF-tectmoiogy. The LCD panel is driven by a AGP local bus video controller wi 4MB video memory. Stereo Speakers Two built-in speakers provide clear stereo sound.
1-10 System Status LED Indicators The LED indicators display the system’s operation status. Icon Color oO Green Battery power is used with system turned on. Red AC power is used with system turned on or AC and Battery are used with system turn on. Green Battery is fully charged. aE Red Battery is being charged. Blinking Red | Battery power is critically low. 8 Green The hard disk is being accessed. Green The system has entered Suspend-To-RAM (STR) or Power-On-Suspend (POS) mode.
1-11 LCD Panel Stereo Speakers Power Button Keyboard Microphone Track pad & Buttons 1-9 Figure Figure 1-10 Chapter 1: Hefting Started
rad ln ni A Lek be elite ei SEAR DAE J Ph 1-12 Rear View Microphone-in Jack 2 Use this jack to connect a microphone to the system for audio input. Headphone Jack QO Headphone can be attached to the system through this jack for audio output, so can external speakers that have built-in output power amplifier, wm\® PS/2 Type Port A PS8/2 type mouse and keyboard may be connected to the system using this port. ey Serial Port fol of This port is NS 16C550 compatible.
1-13 CL C3 S-video Jack Use this jack to transmit video signal to a TV set. You may need to select the video standard (OPALESCENT) for video display (please refer to Chapter 3, Components Menu for more information). USB Port The Universal Serial Bus (USB) port simplifies the expansion capability for peripherals by daisy-chain connection of a number of USB-equipped devices.
1-14 Right-side View 3.5” Floppy Diskette Drive The Notebook comes standard with a 1.44MB floppy drive installed. Cross the button on its top-right side to eject the diskette. 5.25” CD-ROM Drive The 5.25” IDE CD-ROM module is designed to be changeable installing or removing the two screws that fasten the CD-ROM drive. The eject button is located in the middle of the front cover of the CD-ROM drive. Pressing it will release the CD tray. Refer to Chapter 2: Operation, for more information.
3.5” Floppy Disk Drive infrared 5.
1-16 Left-side View = DC-in Socket Plug the AC adapter into this socket for power supply. To disconnect, pull the plug (not the cord) directly back. Ventilation The Notebook provides ventilation to dissipate the system’s operating heat. Do not block or obstruct it during operation. Left-side Stands When a high speed CPU is installed, the erecting stands on both sides will help heat dissipation during operation.
1-17 Bottom View 2.5” Hard Disk Drive The 2.5” hard disk drive accepts any 2.5” IDE hard disk drive with a height of 12.7mm or less. Accessing the corresponding screws will allow you to install or to remove this hard disk drive. Refer to Chapter 2: Operation, for more information. CPU Cover Detaching the screws to remove the cover will reveal the microprocessor. You may upgrade the CPU for higher system performance. Battery Pack } This compartment houses a rechargeable battery pack of either Nigh or Lion.
Chapter 2: Operation The Notebook has many advanced features to help you with your computing work. This chapter describes each of the Notebook’s hardware features and shows you how to use them. Before you begin working with amy internal components of the Notebook, remove the battery and disconnect the AC power adapter, Make sure that you wear an anti-static wrist strap to ground yourself before working with any internal components of the Notebook. Static electricity may damage components beyond repair.
2.2 Upgrading Processor Module The Notebook Computer features the structure of Intel’s Mobile Module (MMC2). The Processor Module incorporates an Intel Pentium Mobile processor, secondary cache, and the Intel Precise “North bridge” system controller, voltage regulator, and thermal sensor on a single printed circuit board. The Processor Module connects to the ma inboard through two board-to board connectors.
tit om rv Ret it it rest Replacing Processor Module Remove all power sources (AC power and battery). Turn the Notebook over. Remove the CPU cover. Remove the screws that fasten the heat sink mounted on the Processor Module. Carefully detach the Processor Module from the ma inboard (Figure 2-2).
2-4 Note: To insert or extract your processor mobile module, please contact your service dealer for correct operation.
2-5 Reinstalling Heat Sink Reinstall the CPU in the reverse order of removal. Make sure that the heat sink cable is properly installed. (Figure Figure 2-5.1 Figure 2-5.
2-6 Setting DIP Switch In order to keep up with the latest system BIOS, your Notebook may be upgraded. Consult your dealer for further information. The DIP Switch needed to be set in the On position when updating the existing system BIOS. The DIP Switches should be reset to the Off position after BIOS updating is complete. Ash ROM BIOS 1 3 2 Existing BIOS Off Off Updating BIOS Not Applied. Accessing the 2-Pole DIP Switch Q Turn the system power off.
2-8 Accessing the Memory Sockets QO Tum the system power off. OQ Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure QO Carefully lift the keyboard assembly out so that the ma inboard is exposed. Locate the memory sockets (Figure 2-7).
Installing Memory Module Follow the steps below to install the memory module: Turn the system power off, Press the two keyboard lases so that the keyboard can be elevated from its normal position (Figure Carefully lift the keyboard assembly out so that the ma inboard is exposed. Locate the memory sockets (Figure 2-7). Position the memory module at a slight angle and fit its connectors into the socket firmly. Push the module down and ensure it locks into place (Figure 2-8), Reinstall the keyboard assembly.
2.10 Removing Memory Module oO Q Q Turn the system power off, Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure Carefully lift the keyboard assembly out to expose the ma inboard. Locate the memory sockets (Figure 2-7). Gently pull the two latches on both ends of the module outward. The module will pop up (Figure 2-9). Remove the memory module. Reinstall the keyboard assembly.
2-11 Using Hard Disk Drive The hard disk drive is mounted in a removable case and may therefore be taken out to accommodate other 2.5” IDE hard disk drives with a height of 12.7mm. The system supports drives with capacities greater than 528MB through the Logical Block Addressing (LBA) mode. It also supports Programmed VO (PIO) mode 4 and provides a high performance data transfer rate at speeds up to 33 Microsecond (A TA-33). Removing Tum the system power off. Turn the Notebook over.
2-12 Replacing Hard Disk Drive The hard disk drive is contained within a case. Two screws on each side of the case need to be removed so that the hard disk drive can be taken out of the case to replace with another one (Figure 2-11). ‘The location of the two screws may be varied depending on different hard disk models. Gently disconnect the cable from the hard disk drive when taking it out of the case. Be careful not to bend any pins or crimp the cable.
2-13 Using Floppy Disk Drive The Notebook comes standard with a 1.44MB, 3.5” floppy disk drive. It is labeled drive A: and may be used as a boot device if properly set. Inserting/Removing Diskettes . When using the floppy drive, always insert your floppy diskette label-side up (Figure 2-12). To remove your diskette, press the eject button on the top-right corner of the floppy drive.
2-14 Write-Protecting Diskettes Diskettes can be write-protected to prevent files from being accidentally erased or destroyed. To write-protect a 3.5” floppy diskette, move the built-in write-protect tab to the write-protect position, (“up” so that you can see through the “hole” in the upper, right-hand corner of the diskette). Putting the write protect tab back “down” will enable you to write data on the disk again. Do’s and Don’ts Always make backup copies of your software and data diskettes.
2-15 o. Using CD-ROM The Notebook comes standard with a removable 5.25” CD-ROM module. It is labeled drive D: and may be used as a boot device if properly set. Do not disassemble the CD-ROM module. Only certified technicians should perform repairs to the CD-ROM module. To insert a CD, press the Eject Button and place the CD on the Disc Tray label-side facing up. Push the CD tray in and you are ready to start. The Busy Indicator will light up while data is being accessed or while an audio CD is playing.
2.16 Removing CD-ROM Module Turn the system power off. Turn the Notebook over. Remove the CD-ROM cover {Step 1 in Figure 2-14). Remove the securing screw to release the CD-ROM module. (Step 2 in Figure 2-14). Slide the CD-ROM module slightly out to disconnect the cable (Step 3 and Step 4 in Figure 2-14).
2-17 Loading Compact Discs ° Qo Qo Turn on the power. Press the CD-ROM eject button; the disc tray will pop out partially. Pull the disc tray out. Carefully load the CD on the disc tray with label-side facing up. Press it gently to ensure it fits into place (Figure 2-15). Push the tray into the computer to close it.
2-18 Handling of Compact Discs Proper handling of your CDs will prevent them from being damaged and ensure the accessibility of data stored on them. . Hold the CD by the edges; do not touch the surface of the disc. Use clean, soft, dry cloth to remove dust or fingerprints. Do not write on the surface using pen. Do not attach any paper or other materials to the surface of the disk.
2-19 Using PC Card Sockets The Notebook provides system expansion capabilities with two PC card sockets (previously referred to as PCMCIA). PC cards to be inserted can be LAN, fax/modem, communication devices, or expanded memory. Both sockets support 3.3V 32-bit PC cards, referred to as Card Bus. The Card Bus sockets are backward compatible with 5V 16-bit PC cards. There are three types of PC cards. Type I measures 3.3mm thick; Type II 5.0mm; and Type I 10.5mm.
2-20 Removing PC Cards To remove a PC card, press the appropriate eject button and the card will be ejected from its slot (please refer to Figure 2-17).
2-21 Using Hot Keys Located on the bottom-left edge of the keyboard layout is a colored Fn key. It is a special feature found only on the Notebook that provides for key combinations with other keys for easy access to system features. Hold down the Fn key while pressing other key as below: |. Hot Keys _. System Features “li Remark.
2-23 Using Numeric Keypad The colored keys in the middle section of the keyboard will function as a Numeric Keypad (Figure 2-19). The numeric keypad overlay can be used for numeric data input. Follow these steps to access the Numeric Keypad: © Press the Hemlock key to lock the Numeric Keypad. O Press the Fn key along with the colored keys to operate the Numeric Keypad.
2.24 TV Output The Notebook is equipped to send video signals to a TV set through the Video jack. Different countries use different TV broadcast standards. A TV set must comply with the appropriate standard to properly receive broadcast signals. In the United States, TV sets are built to comply with the SCENT standard. Many countries in Europe and Asia use the PAL standard.
2-25 LCD Panel The Notebook Computer features the LCD panel display with the following: . PCI local bus controller, 4MB video RAM (GRAM type). Capability to support 1024x768 (XGA) resolution TFT display. Ability to transmit video signals to a VGA monitor (CRT). Capable of simultaneous display on LCD and CRT. Video Port Manager (VPM) for video input from XV-capable PC card. Remark: Two technologies of LCD display: Active technology (TFT = Thin Film Transistor).
2-27 Using Power Management The Notebook system provides you with various modes to manage its power consumption while maintaining system performance. Please refer to Chapter 3: BIOS Utilities, System Configuration Utility, Power Menu for more information. Advanced Power Management (APM 1.2) The Notebook provides built-in Advanced Power Management (APM 1.2) support to reduce power consumption. APM function varies depending on the operating system you are using.
2-28 Hard Disk Standby The system will turn off the Notebooks hard disk drive motor if it has not been accessed after a specified period of time. The motor will be turned back on once the system attempts to read or write data ta it. Global Standby In Global Standby mode, the CPU clock will be stopped and most controllable peripheral devices will be powered off. If the idle timer expires before any system activity is detected, the system will change from Standby mode into Suspend mode.
2-29 Powered On Suspend (POS) Of the three suspend modes, Powered-On-Suspend saves the least amount of power. However, it takes the shortest time to return to full operation. Resume from POS Mode The system may be resumed from Powered-On-Suspend mode by: Alarm resume (month/day/hour/minute) Modem ring Any keyboard key pressed Depressing the power button (if configured as Suspend/Resume function under SCU) Suspend To RAM (STR) Suspend-To-RAM mode is the medium level of system power management.
2-30 Suspend To Disk Off (DOFF) Suspend to Disk is a O-volt suspend mode for system power management. STD mode saves the maximum power but takes the longest time to return to full operation. 1. Use your operating system’s DISK program to delete all partitions of the hard disk if any already exist on the target drive. 2. Boot the system from the A: drive and run the OVMAKFIL.
2-31 Attaching Peripheral Devices The herein mentioned shows you how to attach peripheral devices to the ports or jacks on the rear panel of the Notebook Computer.
2.32 Attaching a PS/2 Keyboard or Mouse The Notebook can be operated with a PS/2 keyboard or mouse attached by means of the PS/2 transfer cable. Attach the external keyboard or mouse as shown below (Figure 2-22).
2-33 Attaching a Serial Mouse The serial port features a 9-pin connector. You can connect any serial device such as a mouse to this port. Turn the system power off. Connect the cable to the serial port on the rear of the Notebook Computer {Step 1 in Figure 223). Tighten the screws that fasten the cable to the serial port (Step 2 in Figure 2-23). Turn on the Notebook Computer. In addition, you may need to install the manufacturer-supplied driver for the serial mouse.
2-34 Attaching a Parallel Printer You may connect any standard Electronics parallel printer to your Notebook using the parallel port. OQ Turn the system power off. © Connect the cable to the parallel port on the rear of the Notebook Computer (Step 1 in Figure 2-24), Q Tighten the screws that fasten the cable to the parallel port (Step 2 in Figure 2-24). O Insert the other end of the cable to the printer’s connector. Fasten the cable’s connector. Q Tum on the printer and Notebook Computer.
2-35 Attaching an External Monitor (CRT) The computer is capable of displaying information not only on the LCD, but also om SAGA compatible displays attached to the computer. Information can be displayed on both the LCD and the external monitor simultaneously. Enter the System Configuration Utility (SCU) to select the appropriate parameters or use the Fn + F6 keys (refer to Chapter 2, Using Hot Keys). O Tum the system power off.
2-36 Attaching a Proprietary Port Replicator The proprietary Port Replicator, providing interfaces for those found on the Notebook system, frees you from fumbling with multiple cables every time you leave the office. Please contact your dealer for detailed information.
2-38 Attaching a TV Set The S-video jack on the rear panel of the Notebook is used for transmitting video signals to a TV set. You may need to select the video standard for video display. Enter the System Configuration Utility Sco, Components Menu to specify the appropriate TV mode. Simultaneous display on external monitor (CRT) and TV is available. You may enter the SCU to select the appropriate parameters or use the Fn + Fé keys (refer to Chapter 2, Using Hot Keys).
2-39 Attaching a USB-compatible Device The Notebook provides a USB port for connection of a USB-compatible keyboard, mouse oF other devices. (Figure 2-29).
Chapter 3: BIOS Utilities This chapter provides information regarding the Power On Self Test (POST) and shows you how to configure the system parameters using the System Configuration Utility (SCUD. BE Power On Self Test (POST) POST Message: Normal Operation . POST Message: Error Detected BE System Configuration Utility...
3.2 Power On Self Test (POST) The system BIOS (Basic Input/Output System) performs a series of Power On Self Test (POST) on system memory and key computer components every time the computer is turned on. Tf an error exists, the POST routine may halt execution (depending on the severity of the problem). The POST also initializes BIOS configuration then boots the operating system. POST Message: Normal Operation If no error occurs, the system will be operating after the POST process is completed.
POST Message: Error Detected If an error is detected, a WARNING message will be displayed. You should either press F1 key to continue, or press the Carl-Alt-S keys simultaneously to enter the System Configuration Utility. System Soft Mobile Pro BIOS Version 1.01 (2482-00) Copyright 1983-1996 System Soft Corp. All Rights Reserved 233 MHz Pentium with MMX CPU External Cache: 512KB installed 4 MB Video RAM System Soft Plug-n-Play BIOS Ver.1.17.
2-4 System Configuration Utility The System Configuration Utility (SCU) is a ROM-based configuration utility that displays the system’s configuration status and provides users with a tool to set their system parameters. The settings are stored in nonvolatile battery-backed COS RAM which saves the information even when the power is turned off, and retains it when the system is turned back on.
3-5 Initiating the System Configuration Utility The System Configuration Utility (SCU} will be accessed when simultaneously pressing the Carl, Alt, and 8 keys. to enter System Configuration Utility The above message only lasts seconds. 1f you miss it, the computer will initiate the boot process. You must reboot the system and try again within the time limit if you want to enter the System Configuration Utility.
3-6 Working with the Menu Bar of the System Configuration Utility Press Carl-Alt-S keys simultaneously to enter the menu bar of the System Configuration Utility. Action Keys:Used. i J Description — Activate menus Alt Activate the System Configuration Utility. Select menu bar item | Left arrow Mace to a menu bar item on the left. Right arrow Move to a menu bar item on the right.
3-7 Working with the Pull-down Menu of the System Configuration Utility When the desired menu bar item is highlighted, press the Enter key to enter the pull-down menu for values setting. Action Keys Used Description Select pull-down Down arrow (4) Move to the next pool-down menu item menu item. Up arrow (1) Move to the previous pull down menu tier, The highlighted letter Move to the corresponding key pull-down menu item, Select a control Tab Move between the options.
3-8 Features of the System Configuration Utility Startup Menu Item Setting/Option Function Date and Time | Day/Month/Year Set the current date and time. Hour/Minute/Second Fast Boot Enable Initialize and quickly boot the system in a few seconds by skipping certain diagnostic tests. Disable Disable the above. Boot Device 1" Boot | Hard Disk C Specify where the system device | CD-ROM Drive Diskette A boots from. 2" Boot | Hard Disk C Specify where the system Device | CD-ROM Drive | boots from.
3.9 Item Setting/Option Function Enable LCD Enable Stretch the display to fill the Expand Mode entire viewing area of the LCD panel, Disable Disable the above. Boot Password | Enter old Power-On Set password for booting Password computer. Users are authorized Enter new Power-On to start the system after entering Password correct password. Verify new Power-On Password Enable Password to Power-On SCU Password | Enter old Setup Password | Set password for modifying Enter new Setup SCU.
3-16 Memory Menu Tim South re Em Cache L1 Disabled Disable the processor's internal cache. Systems | Cache ‘Write Back Enable the write-back policy for L1 memory to access only when necessary to update the cache contents with changes for faster performance. L2 Disabled Disable the L2 cache controller. Cache Write Back Enable the write-back policy for L2 memory to access only when necessary to update the cache contents with changes for faster performance.
3-11 Disks Menu Item Setting/Option = Function Diskette Drive A None Specify the drive types for the Drives 144 MB diskette drive A. 2.83 MB IDE Settings | Primary Drive Enabled | Enable enhanced IDE settings.
3-13 Stem Setting/Option Function PS/2 Mouse Enable Enable the system’s track pad Port or an external PS/2 mouse. Disable Disable the internal or external PS/2 mouse if IRQ resource is not enough. Microsoft Enable Support PS/2 mouse with the Intelligent wheel button. Support Disable Do not support PS/2 mouse with the wheel button. Keyboard Key Repeat | 2 cps Define the rate (characters per Repeat Rate cps second) at which the keyboard 10 cps repeats while a key is 15 cps depressed.
3-15 Power Menu Stem Setting/Option 5 Function Enable Power | Enable Enable/Disable all power Saving Disable saving features. Low Power Enable Enable/Disable the power Saving saving to its lowest which Disable results in max. performance but shortest battery life. Medium Power | Enable Enable/Disable the power Saving saving to its medium which Disable results in both moderate performance and battery life. High Power Enable Enable/Disable the power Saving saving to its highest which Disable results in min.
3-16 Item Sel on: ion: Suspend Power Power On/Off The power button is switched Controls Button to turn the system on or off. Function | Suspend/Resume | The power button acts as a suspend/resume button for switching the system between a working state and the suspend mode. Pressing the power button for more than four seconds will generate a power button over-ride event to switch the system from a working state to the Soft-Off state.
3.17 Item Setting/Option ~ Function Enable Enable Resume the system from MODEM Ring STR or POS mode when 2 Resume modem ring is detected from the serial port. Disable Disable the above. Enable Battery | Enable Automatically suspend the Low Suspend system upon a low battery condition. Disable Disable the above. Advance CPU | Clock Full Speed | Specify the type of Controls Control Doze Mode | Processor Clock Control. Mechanism tabla a.
3-18 Exit Menu Item Save and Exit Save the current settings and reboot the system, Exit (No Save) Exit without saving any current changes. Default Settings Restore the default settings (the original ones found in ROM). Restore Settings Restore the current setup settings to the original custom ones. Version Info Show current BIOS version information.
4-1 Chapter 4: Troubleshooting Sometimes your computer has some problems. Before you consult the computer vendor, you can try to solve problems yourself.
4-2 Battery Problem; Solution 1: Solution 2: Problem: Solution 1: Solution 2: Solution 3: Problem: Solution: Problem: Solution: Problem: Solution 1: Solution 2: Solution 3: The battery pack can not be charged. The battery pack is exposed to excessively hot or cold environment. Let it restore to normal temperature before you use it. The battery pack might be used up. The battery pack can not be charged and the charge indicator turns off. The battery has been fully charged.
4-3 Solution 4: Some peripheral device or PC card is consuming power. Turn off the unused device to save power. Solution 5: The battery has been given a partial charge. When charging, always fully charge after fully discharge. Power Problem: The computer can not boot when the battery pack is not inserted. Solution 1. The power cord is not correctly connected with AC adapter. Make sure the power cord is firmly plugged into grounded outlet and computer.
44 Floppy Disk Drive Problem: Solution 1: Solution 2; Solution 3: Solution 4: Problem: Solution 1: Solution 2: Solution 3: Hardware Problem: Solution 1: Solution 2: Solution 3: Solution 4: The floppy disk drive can not write data to disk. The floppy is not formatted. The floppy is write-protected. Please cancel the protection. The data is written to incorrect disk drive, The space left on disk is not enough. Please use a new disk or delete the unneeded data.
4-5 LCD Panel Problem: The font is too dark, Solution: The brightness or contrast is not correctly set, Please press Problem: Solution 1: Solution 2: Solution 3: Solution 4: Problem: Solution: Fn+F7 or Fu+F8 key combination (only limited to DST panel) to adjust the contrast control, and use Fn+F9 or Fn+F10 to adjust the brightness control. The screen is blank. The panel blank application might be set. The system operates the screen saver after a specified period of time.
4-6 Memory Module Problem: Solution: Problem: Solution: Problem: Solution: Problem: Solution: Problem: Solution: PC Card Problem: Solution: Problem: Solution 1: Solution 2: Solution 3: Problem: Solution: The computer can not boot. The incorrect type of memory module is installed. The memory capacity is not enough. The memory is not correctly configured for the application. The detected memory capacity is not correct, Some metronome module is not correctly installed or not compatible with your computer.
47 Boot Password Problem: You forget the boot password. Solution: While forgetting the password, you must unpack the computer and delete the memory. Please ask the vendor for help. Audio Problem: The audio speaker can not be heard. Solution: The volume might be set too low. Please check your volume control. Problem: The volume is too high (or too low). Solution: The volume is not correctly set. Please chock your volume control. Problem: The headphone can not be heard.
4-8 CD Problem: Solution: Problem: Solution 1: Solution 2; Problem: Solution: Problem: Solution 1: Solution 2: Solution 3: The compact disk can not be ejected, The compact disk is not correctly placed in the tray. The compact disk can not be read. The compact disk is not correctly placed in the tray. The compact disk is dirty. Please clean it with a CD-ROM cleaner kit. The musical compact disk can be read while the data disk can not. The compact disk hardware for reading data needs to be checked.
4-9 Printer Problem: Solution: Problem: Solution 1: Solution 2: Solution 3: Solution 4: Solution 5: Problem: Solution 1: Solution 2; The printer is not ready. The printer power cord is not plugged into or the connector is not correctly connected. ’ The printer can not print. The printer is not power on. Please turn on the printer. The printer is not in “connected” status. Please set the printer in “connected” status. The paper is used up. Please add the paper.
5-1 Chapter 5: Installing Drivers The chapter helps you starting to operate the Notebook Computer with the procedures of how to install software, device drivers and utilities step by step. This chapter is designed for notebook beginners as well as advanced users. Please follow the steps and suggestions below to start a new notebook computing work. Use the CD for drivers in the package; prepare a DOS startup disk and DOS files before installing drivers for the first time.
52 Preparation Preparation for a new notebook: 1. Use a DOS startup disk to start the Notebook Computer. 2. Run DISK utility from DOS to create a bookable partition. After A prompt, type disk. (A: disk) Choose “1” and *C* to create hard disk as drive C: (See DOS manual for the operation detail.) 3. Format hard disk. Follow the command "Format to create a bookable hard disk and a bookable floppy disk. (A: format C) (C:/S copies system files to the formatted disk) 4. Insert the disk of the CD-ROM driver.
5-3 Installing Windows 95 1. Start DOS. 2.Insert the Windows 95 CD-ROM. 3.60 to the “setup” directory. 4, After the directory prompt, type "useful, then press [Enter]. 5. After the Windows 95 setup program performs a routine check on your system, press [enter] to continue. 6. When the setup initializes, click "Continue". 7.Click "Yes" on the "License Agreement” screen. 8.Click "Next” to select “Collecting Information About your PC". 9. Click "Next" to select the default of or enter a different directory.
5-4 Installing Windows 98 Start DOS. Insert the Windows 98 CD-ROM. Go to the “setup” directory, type “setup”, then press [Enter]. Follow the instructions on the screen. Also choose the recommended ones showing on screen. The Windows 98 setup program will check the hard disk drive automatically. 6. When the setup initialize, click “Continue”, 7. Choose "License Agreement” to agree the contrast. 8. Click "Next" to type the product ID number. 9. Click "Next" the program will automatically check the system. 10.
5-5 Installing Drivers for Win OSR2.1 Step I: Run USB supplement path update file O After finishing Win ORS2.1 installation, go to Win, QO Download the file from Microsoft Web Site to run the USB supplement path, Step IT: Setup [PATCH] O Under Win, open the driver [PATCH] Intel 82371xb.inf TX chip from the compact disk. O Open [suspenseful] and follows the instruction to complete the installation. QO Restart the system. Step III.
install. Click the following one by one, [Manufacture Texas Instruments], [Texas Instruments], [PCT-1225 Card Bus Control], [Next], [Next] and [Finish]. Note: Make sure whether the files are copied to drive C successfully. [ Step VI: Video-in Driver Installation Q Boot the system, switching to SCU system by press keys Ctri+Alt+S before running Windows. Choose [Components] from the top of the screen. Choose [Enable) for [Video-In Mode) QO Under Windows, Select [Start], [Run] and open the path \sextuplet] to
5-7 Drivers for Win Step I: VGA Driver Installation Q After installing Win successfully, enter into the system. Click [Start] at the bottom-left corner: select [Run); open the path of to run VGA driver installation. When ATI VGA driver has already included in the system, click [Start], select [Run] and open the path of [\antinuclear] and double-click [Ok]. Note: For ATI VGA included system, uninstall the original VGA Driver and then install the driver.
O Restarting the notebook, before entering windows, press the keys Ctrl+Alt+S to switch to SCU status. Select [Component] and choose [Enable] for [Video-In Mode].
5-9 Drivers for Win NT 4.0 Preparation Q Install [Service Pack] to the system or see Microsoft for the latest operation system update. Step I: VGA Drivers O Choose [Start], [Setting], [Control Panel]. Open [Display], Sd [Setting], [Display Type, [Change]. Then, Chick [Have Disk] : and [Browse] and open the path Click [Ok] . to copy all concerned files to the hard disk, En Q Restart Winning system, Step IT: Audio Drivers (ESS 1978 MEME / 19785 M2E) OQ Under WINNING 4.
> Appendix A: Specifications This appendix describes the features and specifications for the Notebook Computer. E Processor — Mobile Pentium II processors (AGP) at 300/266/233 MHz 8 Memory — 3.3V power supply — 64 bit data bus system memory Supports DOCUDRAMA ~ 8MB expandable up to 256MB — Two 144-pin SODIUM package & System BIOS — 256KB flash ROM ~ System Soft BIOS with Smart Battery ~ Plug and Play 1.0a AC PI El Display = 13.3” TFT XGA (1024x768 pixels) LCD panel available AGAPE .
A-2 Radiometric LCD expansion 230 MHz DAC Ti-View for a triple display solution, TV, CRT and LCD Support VPM 1.10 El Mass Storage { 3.5" floppy diskette drive 2.5” hard disk drive (12.7mm high or less) 5.25” CD-ROM. Support Master mode IDE.
A-3 ~ Serial port (COM 1} — PS/2 type port (External keyboard/Mouse) — Microphone-in jack — Headphone jack ~ DC-in jack — Docking connector for Port Replicator (Optional) i 2 Infrared Wireless Communication ~ IDA FIR —ASTIR HH Keyboard — Windows 95 ~ Detachable for various language versions BE Power Management CHAPMAN AC PI — Global standby ~ Suspend and resume ~ CPU over temperature protection ~ Secondary cache power control = Device power management for all devices — Battery low suspend & Rechargeable Bat
A-4 El Size & Weight = 3kg & Temperature Environment — Operating — Storage & Humidity Environment ~ Operating non-condensing — Storage non-condensing User's Manual
Appendix B: I/O Port Pin Assignments Parallel Port Pin; Signal Pin Signal 1 Strobe# 4 Auto Linefeed# 2 Data 0 15 Error# 3 Data 1 16 Initialize# 4 Data 2 17 Select In Ss Data 3 18 Ground 6 Data 4 19 Ground 7 Data 5 20 Ground 8 Data 6 21 Ground 9 Data 7 22 Ground 10 ACK# 23 Ground 1 Busy 24 Ground 12 Paper Empty 25 Ground i3 Select Serial Port Pin .
B-2 Monitor Port Pin Signal Pin Signal 1 RED 6 N.
ins dimme 2 Socket B: Pin “Signal Fin Signal Bl GND B2 NA B3 B_CD3 B4 B CD1# BS B CD4 BS B CD11 B7 B CDS BR} B CDC BY GND B10 B CD6 Bild B CDC B12 B CD7 B13 B CDC Bl4 B CEl# B15 B CDS Bi GND B17 B CAD BI§ B CE B19 B OE# B20 B_VSi1 B21 B Call B22 GND B23 B NORD# B24 B Cad B25 B RIO# B26 B CAS B27 B Call B28 GND B29 B Call B30 B Call B31 B Call B32 B Als B33 B WE# B34 B COCA B3s B_RDYBY# B36 B COCA B37 B VCC C B38 B VCC C Big B VPP B40 B VPP B41 GND B42 B Call B43 GND B44 B CA.