8) Radius port User can configure the port number of the radius server. 9) Encryption User can configure the encryption method when communicating with the radius sever either as AES or TKIP/AES. 10) Radius key User must enter the radius key value which is given by the radius server. 11) Password User can configure the password for the selected SSID connection. 12) Encryption User can enable or disable the client isolation function.
9.1.2 Wi-Fi – Guest Wi-Fi 2.4GHz & 5GHz Setting * 2.4GHz and 5GHz configuration menus are same. 13 14 15 16 17 Open Open WPA2-enterprise WPA2-PSK WPA/WPA2 encryption 18 19 20 21 22 AES AES TKIP/AES 23 13) WiFi network User can enable or disable the Wi-Fi network. 14) SSID hidden User can hide the SSID. 15) Service type User can create the SSID. 16) Security User can select one of the following security mode: Open, WPA2-enterprise, WPA2-PSK, WPA/WPA2 encryption.
9.1.3 Wi-Fi – 2.4GHz & 5GHz Advanced Settings * 2.4GHz and 5GHz configuration menus are almost same. However a few of menus @ 5GHz is different. In this case, we have additional description in the below table. 24 25 26 27 28 30 29 20Mhz 31 20Mhz 20/40Mhz Low Low Upper 24) Wireless multicast forwarding Wireless multicast forward (WMF) transforms the incoming multicast packets to unicast packets. User can enable or disable this WMF function.
9.2.1 Mesh - Mesh Setting User can configure regarding Mesh function in this page. 1 2 3 5 4 6 7 8 1) Mesh Setting User can set the Mesh function of the AR2146. 2) Mesh Topology Mesh topology shows the network map of the AR2146 to the user. 3) Friendly name User can make a friendly SSID name of the WiFi Mesh so that others can easily find it. 4) Smart Connect User click “Smart Connect” button to initiate Mesh grouping. 5) Save Click “Apply” button for applying friendly name.
9.2.2 Mesh - Mesh Topology This page shows the Mesh network topology the AR2146 forms with the Mesh repeaters 1 1) Mesh topology Mesh topology shows the current mesh network between the AR2146 and extenders. It also shows the all clients connected to each node. 35 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
10. Access Control Menu 10.1 NAT A user can configure port forwarding services in this page. The user can choose pre-defined port-forwarding services or make the user’s own services. This might need to connect specific devices via the AR2146. The table shows the external port start numbers, external port end numbers, and their relevant internal port start numbers and internal port end numbers. 36 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
10.1.1 NAT – Port Forwarding A user can configure port forwarding services in this page. The user can choose pre-defined port-forwarding services or make the user’s own services. This might need to connect specific devices via the AR2146. The table shows the external port start numbers, external port end numbers, and their relevant internal port start numbers and internal port end numbers.
10.1.2 NAT – Port Triggering Port triggering is a dynamic form of the port forwarding model. Generally, port triggering is used when the user needs to use port forwarding to reach multiple local computers. However, port triggering is also used when applications need to open incoming ports that are different from the outgoing port. eth4.1/ether4.1 eth4.1/ether4.1 PPP0.2/PPP0.
10.1.3 NAT – DMZ Host DMZ stands for Demilitarized Zone. User only enables the DMZ in a specific case. 1 2 3 1) DMZ Host IP Address Enter the IP address of the client that user wants to expose. 2) Apply Click “Apply” button, then the IP address user entered will be exposed. 3) Remove Click “Remove” button, then the exposure of client’s IP address will be removed. 39 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
.2. Filtering In this page, you can configure a IP address and service type for filtering out. 40 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
10.2.1 Filtering – IP Outgoing Filtering In IP outgoing filtering page, user can configure outbound filter as one of the firewall functions. In order to complete IP outgoing filter, the user must fill in all the following columns. IPv4 IPv4 IPv6 1 2 3 4 5 6 7 1) Filter name User can make the name of the new filter entry. 2) IP version User can select either IPv4 or IPv6. 3) Protocol User can select either TCP, UDP, TCP/UDP, or ICMP to filter.
10.2.2 Filtering – IP Incomming Filtering In IP outgoing filtering page, user can configure outbound filter as one of the firewall functions. In order to complete IP outgoing filter, the user must fill in all the following columns. IPv4 IPv4 IPv6 1 2 3 4 5 6 7 1) Filter name User can make the name of the new filter entry. 2) IP version User can select either IPv4 or IPv6. 3) Protocol User can select either TCP, UDP, TCP/UDP, or ICMP to filter.
10.2.3 Filtering – MAC Filtering In MAC filtering page, user can configure the specific device’s MAC address to filter out. 43 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
10.3. Parental Control In this page, user can manage the connected client’s internet access time. 1 2 3 4 5 6 1) Name User can make user friendly name for a internet access time control. 2) LAN device MAC address User can enter the (W)LAN device MAC address to apply the internet access time control. 3) Days of the week User can select which day to apply the internet access time control. 4) Start blocking time The time when the internet access is blocked.
11. Service Menu 11.1. Dynamic DNS In this page, a user can configure Dynamic DNS. The user also need to configure port forward a PC after D-DNS setting. 1 2 3 4 1) D-DNS provider User can select predefined D-DNS provider from the list. 2) Hostname User can configure a hostname the user want to use for this D-DNS service e.g. xxxx.DynDNS.org. 3) Username and password User can configure the username and the password to access D-DNS service. 4) Apply Click the “Apply” button in order to save settings.
11.2. DLNA A user can enable or disable DLNA service. DLNA configuration guideline document can be downloaded. 1 2 1) On-board digital media server You can enable or disable the digital media server function. 2) Apply Click the “Apply” button in order to save setting. 46 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
12. Management Setting Menu This page is for an administrator. Click the icon, , then the user can manage system setting. 47 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
12.1. Passwords User can change the system password. 1 2 3 4 5 1) Username Enter the username. 2) Old Password Enter the current password. 3) New Password Enter the new password. 4) Confirm Password Re-enter the new password. 5) Apply Click the “Apply” button to change the password. 48 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
12.2. Backup Settings Users can make a back-up for the current configurations and download into a file. 1 2 3 1) Backup file download A user can click the Download button to make a back-up file for the current configurations to download. 2) Settings file name and update Click the “Find” button and a user can select one of configuration back-up file to apply. 3) Update Click the “Update” button to save settings. 49 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD.
12.3. Update Firmware In this page, user can upload CPE firmware file and update. 1 2 1) Find a New Firmware User can find a firmware file for the update. 2) Update After click the “Update” button, the firmware file is uploaded and updated. 50 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
12.4. Reset User can reboot or factory reset for the AR2146. 1 2 1) Reboot Click “Apply” button to make the AR2146 reboot. 2) Restore Default Click “Apply” button to make the factory reset for the AR2146. 51 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
12.5. TR-069 Client User can configure Auto Configuration Server(ACS) settings for the TR-069 embedded the CPE (AR2146). 1 2 3 4 5 6 7 8 9 10 11 1) Inform User can enable or disable the TR-069 on the AR2146. 2) Inform Interval User can set the interval time which the AR2146 communicate with ACS and check the updated data. 3) ACS URL ACS (Automatic Configuration Server) URL. 4) ACS user name User can make a friendly user name for a specific ACS server the user is configuring.
9) Connection Request user name User can configure the friendly user name for connection request. 10) Display SOAP messages on serial console User must enter the password given by the ACS to access it. 11) Connection Request URL It is usually established automatically. However, the port should be configured in some cases. 12) Apply Click the “Apply” button for save settings. 53 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
12.6. System Log You can check and configure the system log generated by the AR2146. 1 2 3 4 Local 5 Local Remote Both 1) Log status You can enable or disable logging function. 2) Log level User can select one of the following log levels, Emergency, Alert, Critical, Error, Notice, Informational, Warning, and Debugging. 3) Display level User can select one of the following display levels. 4) Mode User can select one of the following place to create logs. Option: Local, Remote, Both.