English User Manual P101/P101W Projector Ceiling Mount TILTING EXTENDABLE PROJECTOR CEILING MOUNT 22 lb (10 kg) 3”-12” 20° (7.
Table of Contents Table of Contents / Introduction . . . . . . . . . . . . . Supplied Parts & Hardware . . . . . . . . . . . . . . . . . . Setup - Step 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup - Steps 2 to 4 . . . . . . . . . . . . . . . . . . . . . . . . 2 3 4 5 Setup - Steps 5 to 7 . . . . . . . . . . . . . . . . . . . . . . . . 6 Other Kanto Products . . . . . . . . . . . . . . . . . . . . . . 7 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supplied Parts and Hardware x2 Bolts: A: B: C: D: E: F: G: H: I: J: K: L: M2.
Step 1: Attach Projector to Projector Adapter There are a wide variety of projectors available that use an assortment of bolt sizes. We provide a selection of mounting bolts to fit most projectors. Step 1.1 Determine correct bolt size. Determine the correct bolt size for your projector mounting holes. We provide a wide selection of bolts in varying lengths. See parts list A thru L. Hand test the bolts to ensure you do not damage the projector. See Diagram A. Step 1.2 Select necessary spacers.
Step 2: Attach the Ceiling Plate The P101/P101W ceiling plate (U) has 6 holes for mounting options. This plate will mount the projector within 3” of the ceiling. Secure the ceiling plate with appropriate hardware ensuring the ceiling plate assembly can support 4x the total weight of your projector. Hardware to attach the ceiling mount plate is not included in this kit due to the many mounting and ceiling variables.
Step 4: Attach Projector to Ceiling 4.2 The P101/P101W has two spring loaded locking tabs that allow easy installation to the ceiling plate assembly. Push the Projector Adapter (V) up into the ceiling plate or extension tube. The 2 spring loaded locking tabs will catch in 2 of the 4 square holes in the ceiling plate or extension tube. Take caution to ensure the Projector Adapter (V) engages; see Diagram G. O 4.
IF NECESSARY Step 7: Adjust the Projector Adapter Tension The Projector Adapter (V) Tensioning Ring comes pre-tensioned from the factory. Should you find your installation requires this ring to be adjusted and re-tensioned, follow this procedure, referring to Diagram I: Step 7.1 Use the included Wrench (Z) to loosen the locking nut. Step 7.3 Tighten the locking nut with Wrench (Z) to ensure the Plastic Tension Ring cannot loosen. Step 7.
Check out more great products from Kanto! Kanto Speakers • Check out our full line of bookshelf and desktop speaker systems • Available in a stunning array of colors • Visit kantospeakers.com for more! + SP26 + + • Full line of Audio and Video Cables • White or Black Cables available • HDMI, Optical, Mini-jack, RCA, USB • Switchers, Hubs, and Adapters • Visit kantoliving.com par To learn more about all our products, visit www.kantoliving.
