User Instructions

1
PAD display instructions
Gear display and high and low speed
display
1. When gear D has no signal, its display is
the same as that of other gears;
2. When the gear D signal is valid, it will be
highlighted and amplified; When N gear and
R gear are valid, the effect shall refer to D
gear;
3. When the high-speed switch is turned on,
"L" light is lit;
4. When the high-speed switch is turned on,
"H" light is lit.
Main interface(home page)
1. Front strip LED lamp
Turn on the front strip LED light to light up
the icon;
2. Front and top strip LED lights
3. When the front and top strip LED lights
are turned on at the same time, the icon
is lit;
4. READY light
When the vehicle is in a drivable state, the
READY light is lit.
Left instrument panel display
1. 2WD / 4WD display
When the 4WD switds is turned on,the
icon will be lit. When the 2WD switch is
turned on,the icon will be lit.
2. Parking break display
When the Parking break is pulled up, the
icon is displayed;
3. Vehicle speed display
According to the collected data, the vehicle
speed (value) is displayed in real time, and
the pointer indicates in real time. The
maximum range of the instrument is
80mph .
3
1
2
1
2
4
3
1
2
3