KT TECH Model: KT-3268BTU PLL Alarm Clock Radio I N STRU CTI O N M A N UA L Thank you for buying KT TECH’s product. Please read the manual carefully to get the best performance from this unit.
IMPORTANT · · · · · · · · · · · · · · · · · Read these instructions. Heed all warnings. Follow all instructions. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the clock radio.
LOCATION OF CONTROL 1 2 3 4 VO L AL 1 VO L + AL 2 MEMORY TUNING - SNOOZE DIMMER/SLEEP/SCAN 8. AL1 INDICATOR 9. PM INDICATOR 10. BLUETOOTH 11. AL2 INDICATOR 12. DIGIT DISPLAY TUNING + FUNCTION 8 9 1. VOLUME + / AL2 2. VOLUME - / AL1 3. SNOOZE / DIMMER / SLEEP/SCAN 7 6 4. MEMORY / TIME SET/ 5 5. / FUNCTION 6. TUNING +/ 7. TUNING - / AL 1 AL 2 PM Bluetooth Digital Clock Radio 14 15 13 13. FM ANTENNA WIRE 14. DC INPUT 15.
To seach for a radio station manually : Press TUNING +/- repeatedly to tune to a radio station. Store FM Radio Stations You can store up to 20 FM radio stations in preset channel automatically or manually. Store FM radio stations automatically (auto scan) 1. Press “ / FUNCTION” to turn ON FM radio. 2. Press and hold “Tuning + or - ” for the FM Tuner to tune to a station automatically. 3. Press and hold “SNOOZE/DIMMER/SLEEP/SCAN” multi-function button for 2 seconds. 4.
8. Playback music or multi-media audio source on the device/ smartphone. 9. Press Volume + / - or adjust volume level on the device/ smartphone to desired level. 10. Press skip to select previous song. 11. Press skip to select next song. 12. Press to play or pause the song that is being played back. Note The digit display returns to clock display if no button is pressed for 10 seconds. SET ALARM TIMER You can set two separate alarm timers. For the alarm sound, you can select the radio or the buzzer. 1.
ADJUST VOLUME While listening, press + VOLUME – to adjust volume. ADJUST DISPLAY BRIGHTNESS During standby mode, Press and hold DIMMER for 2 seconds repeatedly to select high or low brightness levels. USB Charging Use the USB charging port to charge your smartphone or to power USB powered devices such as a USB type lamp or fan. To Connect your cell phone for charging : Use a USB cable (not included) to connect your cell phone to the USB connector or the unit. Your cell phone should start charging.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
