KT TECH KT-3128BT DIGITAL DUAL ALARM FM CLOCK RADIO WITH BLUETOOTH INSTRUCTION MANUAL Thank you for buying this KT TECH’s product. Read this manual carefully to get the best performance from this unit.
IMPO R TAN T · · · · Read these instructions. Heed all warnings. Follow all instructions. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. · Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. · Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the clock radio.
waste. Please recycle where facilities exist. Check with your Local Authority of retailer for recycling device. (Batteries pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like. LO C AT IO N O F C O N T R O L 3 1. /FUNCTION 2 2. MEMORY / /TIME SET / 3. TUNING Forward 1 4. TUNING / Backward 5. VOLUME - / AL2 6. VOLUME + / AL1 7 7.
C O N N E C T PO WE R CAUTION · Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. · Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. B OT TO M O F S E T Battery compartment for 1.5 volt (LR6, UM-3, AA) battery 2pcs. (not included) for temporary time storage. S E T T IM E 1. Press and hold TIME SET for two seconds. [0:00] Hour digit is blink. 2.
S TO R E FM R AD IO S TAT IO N S You can store up to 20 FM radio stations in preset channel automatically or manually. STORE FM RADIO STATIONS AUTOMATICALLY (AUTO SCAN) 1. Press / FUNCTION to turn on FM radio. 2. Press SNOOZE/DIMMER/SLEEP/SCAN multi-function button and hold for 2 seconds. The received stations are automatically stored to preset numbers. STORE FM RADIO STATIONS MANUALLY. 1. Tune to an FM radio station. 2. Press MEMORY to activate the storing mode. 3.
8. Playback music or multi-media audio source on the device/ smartphone. 9. Press Volume + / - or adjust volume level on the device/ smartphone to desired level. 10. Press skip to select previous song. 11. Press skip to select next song. 12. Press to play or pause the song that is being played back. Note The digit display returns to clock display if no button is pressed for 10 seconds. S E T ALAR M T IM E R Make sure that you have set the clock correctly. You can set two separate alarm timers.
S N O O Z E ALAR M When alarm sounds, press SNOOZE to activate the snooze time 9 minutes. The AL1 / AL2 indicator keeps blinking. S E T S LE E P T IM E R 1. Press / Function to radio mode. 2. Press SNOOZE/DIMMER/SLEEP/SCAN multi-function button repeatedly to select the sleep timer period (in minutes). To deactivate the sleep timer, press SNOOZE/DIMMER/SLEEP/ SCAN multi-function button repeatedly until back to radio frequency.
mains supply but there is now the advantage that your clock will continue to work. The clock display will not light up, as the clock time will be held in the memory. This also enables you to move the set from place to place without re-setting the clock every time. The battery back-up system is only meant to be used from short temporary power interruption. For longer durations, the battery may become exhausted or there may be some deviation in accuracy.
REMARK changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.