Issue Date: 2014-08-12 Page 10f 9 Report Reference # E356418-A8-UL UL TEST REPORT AND PROCEDURE Standard: UL 80950-1, 2nd Edition, 2011-12-18 {Information Technology Equipment Safety Part 1: General Requirements) CSA 22.2 No.
[sue Date: 2014-09-12 Page 2 of 9 Report Reference # E356418-A8-UL Supporting Documentation The following documents located at the beginning of this Procedure supplement the requirements of this Test Report: A. Authorization The Authorization page may include additional Factory Identification Code markings. 8B. Generic Inspection instructions i. Part AC details important information which may be applicable to products covered by this Procedure.
issue Date: 2014-08-12 Page 3 of 9 Report Reference # E356419-A8-UL s The means of connection to the mains supply is: Plug gable A = The product is intended for use on the following power systems: TN = The equipment disconnect device is considered to be: Plug = The product was investigated to the following additional standards: (1) Blade configuration was evaluated and found compliant with standard for Wiring Devices-Dimensional Specifications, MANNISHNESS Direct Plug-in Equipment complies with UL 1310 mech
issue Date: 2014-09-12 Page d of & Report Reference # £356419-A8-UL Fusing Resistor Rated power and resistance and type located on or adjacent to fusing Rating resistor or fusing resistor holder Special Instructions to UL Representative Inspect the transformer(s) listed in Production-Line Testing Requirements {Electric Strength Test Special Constructions) per AA1.1{C). When the tests are conducted at other location, Inspect test record and specification sheet provided by the component manufacturer.
issue Date: 2014-08-12 Page 9 of 9 Report Reference # E356419-A8-UL Enclosures Type Supplement Id | Description Photographs 3-01 Unit Overview 1 Photographs 3-02 Unit Overview 2 Photographs 3-03 internal View Photographs 3-04 PWB components side view Photographs 3-08 PWB trace side view Diagrams 4-01 Transformer specification Diagrams 4-02 Line Chock (LF 1) specification Schematics + PWB 5-01 PWE Layout Miscellaneous 7-02 Dimension drawing of enclosure (mm) Miscellaneous 7-03 Strain relief drawing (mm) Misc