User Manual

Technical data
Communication interface
Meter reading 3-wire RS485, using MODBUS protocol
READy Gateway configuration Optical eye
Data transfer to smartphone/tablet Wireless M-Bus, C-mode according to
EN13757-4:2013
Data transfer to concentrator Wireless M-Bus, C-mode, according to
EN13757-4:2013
Further interfaces
User interface Optical eye (reading out log data)
Display
Frequency
Wireless M-Bus, C-mode 912.5/915.0/918.5 MHz
Mechanical data
READy Gateway
LxWxD (inches) 4.8 x 3.5 x 3.5
Weight incl. bracket (oz) 23.3
IP protection class IP68
Bracket for READy Gateway
LxWxD (inches) 3.9 x 2.4 x 3.3
Weight (oz) 3.2
Temperature range
Operation -4 - +140 °F
Storage -40 - +158 °F
Flooding temperature +35.6 - +140 °F
Power supply
Internal battery supply 2 x D-cell batteries (3.6 VDC)
Battery lifetime 6 years
Markings/Standards
FCC ID: OUY-READYGW1
RoHS
FCC part 15B
Safety information/Disposal
Do not expose READy Gateway to open fire.
Do not short circuit the connector on READy Gateway.
Please return READy Gateway to Kamstrup if the above specifications cannot be
fulfilled.
Maintenance
The READY gateway must always be properly assembled when cleaning is carried out
in order to protect the internal parts of the meter. Use only water when cleaning.
Activities including installation, adjustments, putting into service, use, assembly,
disassembly and maintenance are required to be carried out by suitably trained
personnel in accordance with applicable code of practice.
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
READY Gateway - Technical data