User's Manual

ManualsBrandsKamoer Fluid Tech ManualsElectronicsX1 PRO T2 Stepper Micropump

X1 PRO T2 USER MANUAL 2022-03-11
 1 Reading tips
 1.1 FCC warning
 1.2 Recommendations
 2 Product Overview
 2.1 Introduction
 2.2 Feature highlights
 2.3 Application
 2.4 Out of the box
 2.5 Part Name
 3 Operate the device with a knob
 3.1 Screen Status Description
 3.2 Pump Operation Control
 3.3 Pump Menu Description
 3.4 Calibration
 4 APP Use
 4.1 Connect Titration Pumps to the Cloud
 4.2 Binding Pump
 4.3 Overview of Calcium Anti-pump Control Interface
 4.4 Setting Up the Interface ###
 4.5 Flow Calibration
 4.6 Firmware Upgrades
 5 Appendix
 5.1 Technical Parameters
 5.2 After-sales warranty information
 6 update log
1 Reading tips
1.1 FCC warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the device and receiver. --Connect the device into
an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment
FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located for operating in conjunction with any other antenna or transmitter.
1.2 Recommendations
Kamoer provides the following documentation for the user:
1.《X1 PRO T2 User Manual》
2.《X1 PRO T2 Quick Start Guide》
Users are advised to read the 《X1 PRO T2 Quick Start Guide》 first to understand the process. For detailed product information, please read the 《X1
PRO T2 User Manual》 Kamoer provides
2 Product Overview
2.1 Introduction
X1 PRO T 2 is remotely controlled via a mobile phone App, using a longer-life stepper motor, which can be used as a titration pump or a calcium reaction
pump; When used as a titration pump, it can flexibly and accurately replenish various elements required for the growth of marine organisms, such as
calcium, magnesium, KH enhancer, trace elements, etc., to the marine biological tank. Through automatic addition, the workload of manual addition can
be greatly reduced, and errors such as missed addition, excessive addition or insufficient addition caused by manual addition can also be avoided.
When used as a calcium reaction pump, it can provide a stable flow of water to the calcium reactor.
2.2 Feature highlights
Small and powerful in size
Simple structure, easy maintenance, quick replacement of pump tube
Pharmed BPT imported pump tube with standard, long life, heat, acid and alkali resistance, ozone and UV rays, anti-aging and oxidation.
With display, intuitive view of status parameters.
With potential knob situ at the temperature to facilitate the adjustment of pump parameters.
Support for flow calibration
Includes real-time clock, runs automatically according to setting parameters, and does not lose power-down parameters.
Support for iOS and Android devices to control titration pumps via WIFI, and app upgrade titration pump firmware
2.3 Application
Marine biology farming
2.4 Out of the box
Before opening the package, check if the outer packaging is damaged during transportation.
After opening the packing box, refer to the packing list in the appendix to confirm that all parts are not missing and check for visible damage. If any
defects are found during the unpacking process, please contact the manufacturer immediately.
2.5 Part Name

Summary of content (8 pages)

PAGE 1
X1 PRO T2 USER MANUAL 2022-03-11 1 Reading tips 1.1 FCC warning 1.2 Recommendations 2 Product Overview 2.1 Introduction 2.2 Feature highlights 2.3 Application 2.4 Out of the box 2.5 Part Name 3 Operate the device with a knob 3.1 Screen Status Description 3.2 Pump Operation Control 3.3 Pump Menu Description 3.4 Calibration 4 APP Use 4.1 Connect Titration Pumps to the Cloud 4.2 Binding Pump 4.3 Overview of Calcium Anti-pump Control Interface 4.4 Setting Up the Interface ### 4.5 Flow Calibration 4.
PAGE 2
3 Operate the device with a knob 3.1 Screen Status Description a.Work Mode: indicates the functional position of the interface, and the operating mode indicates that the machine is working on the home page b.Work Status Indication: In the non-lock screen state, press the button, the pump starts to work, at this point the middle of the screen shows the "in operation..." copy, press the button while the pump is working, the pump stops. c.
PAGE 3
a. Cal: calibration interface title bar, when the cursor in the title bar, press the button, the pump into the superior interface; b. Speed: calibration speed, adjustable, through the rotary button to rotate the cursor to the speed, press the button into the speed editing state, through the rotary button to modify the speed, press the knob again, exit the speed editing state; c.
PAGE 4
c.Make sure your phone connection requires Wi-Fi with a network, and make sure that the Wi-Fi can be connected to the extranet (the device does not support 5G Wi-Fi and cannot use 5G Wi-Fi hot spots); d.Enter the Wi-Fi password, pay attention not to lose the wrong password, click "next" into the device network operation; e-f.If select configure network by router, the device will display Sta Setting, and switch to By Router in the upper right corner of the corresponding mobile App interface.
PAGE 5
g-h.If you select configure network by AP, the device will display AP Setting, select Connect by AP in the App interface of the corresponding mobile phone, and click the ""AP Setting..."is on display"button to enter configure network by AP. Complete the network configuration according to the interface prompt.
PAGE 6
4.3 Overview of Calcium Anti-pump Control Interface Open the app and click on the calcium anti-pump in the device list to enter the calcium anti-pump operator interface: a. Flow rate minimum: b. Current flow rate: the current flow rate of this machine, you can click on the settings. c. Maximum flow rate: The maximum flow rate of this machine. d. Current speed: Change according to the set flow rate. e.
PAGE 7
a. Device information:Display basic information of the device b. Firmware version:Display the current version of the firmware information; c. Device name: Device name, the user can modify it as needed; d. Serial number:equipment serial number; e. Firmware update:If the device has new firmware, click here to update; f. Pump tube setting:Set the life of the pump tube and check the use time of the pump tube here; g.
PAGE 8
d. Long drip timing: set the running time of the pump during calibration; Before proceeding to the next step, make sure that the pump pipe inlet has been immersed in water, the pump pipe outlet is placed in the measuring tube; e. Start titration: click the titration button and the pump will stop after running the duration of the previous set; f. Input volume: after reading the volume of liquid in the barrel input, in ml; g.