D201 Kami Doorbell Camera User Manual FCC ID: 2AFIB-YDS20120 Doorbell Camera Website: www.kamihome.com Support: +1 (888) 878-1584 E-mail: support@kamihome.com https://kamihome.com/legal/fcc Installation Guide D201 V1.1 2020/08/07 新建 2020/08/11 1. 二极管安装图示修改 2. 认证编号更新 3. 安装定位线图示更新 4 . 背板上墙图示更新 5 . 尺寸更新 6 . 安装顺序调整 7 .
. Get to know your doorbell camera 1.
. Charge + Insert battery 1) Charge the battery (optional) Lens Tamper Key Power Indicator If this is the first time to install, please charge the Battery. Use the power adapter and power cord in the package. Insert the charging port to charge. The indicator flash when charging, When it turns green, the battery is fully charged. Reset button 2) Remove the protective cover Speaker As shown on the left: press down with your thumb and pull the protective cover back with your index finger.
3) Install / Remove the battery 4. Getting started After Remove the protective cover, Push the battery into the battery warehouse as shown. (Pay attention to the direction) Step 1 Download the Kami Home App. Register a Kami account and log in. Step 2 After logging into your Kami Home App, tap the "+" sign and select Kami Doorbell Cam. Pull out with your thumb to remove the battery Step 3 After logging into your Kami Home App, tap the "+" sign and select Kami Doorbell Cam.
. Installation recommendations 1) Remove the original doorbell (optional) If you are replacing an existing doorbell, please remove and remove the doorbell and disconnect the wires with the switch off. 3) For mechanical doorbell: install chime connector (optional) If you are using a mechanical chime, please install the chime connector. To ensure a stable power supply. If you don't want chime to make a sound, please connect the wires as shown in the picture.
4) Height and distance recommendations 5) Suggested installation angle The best range for the doorbell to capture the dynamics is 0-4m. For the installation height we recommend 1.2m, to better capture the dynamics near the ground. You can use the different angle plates we provide to meet the main content of the shooting screen. If you don't want to change any angle, choose No. 1 backplane. If you want to change the lateral angle, choose No. 2 backplane.
6) Fixed backplane, wood does not require expansion screws (optional) If you are using a mechanical chime, please install the chime connector. To ensure a stable power supply. If you don't want chime to make a sound, please connect the wires as shown in the picture. Mark here (2 in total) (other backplanes refer to this installation test) No. 1 backplane No.2 backplane No. 1 backplane No.
7) Connecting wire (optional), optional extension cable (optional) Connect the wires coming out of the wall to the screws on the back of the doorbell. Any wire can be connected to any screw. The order does not matter. If you have trouble connecting the wires coming out of the wall to the back of the doorbell, please use the included wire extension cord and wire nut. (Picture) .
No. 2 backplane 2 1 9) Install the front panel No. 2 backplane + No.
) Switch back FCC COMPLIANCE STATEMENT: To complete the installation, please dial back the switch to test the power and connection of the doorbell. The indicator light is green to indicate normal status. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.