Instruction manual

ManualsBrandsKam Manualsaudio & home theatreKompact 10

KOMPACT 10

Compact and portable PA speaker system

Includes 2 x satellite speakers, active subwoofer,

speaker stands and speakeron cables

Satellite speakers - two way passive speaker box

LF: 1 x 6.5" 38mm 23 oz / HF: 25mm silk cloth dome

Frequency response: 90Hz-20KHz

Crossover point: 3KHz

Sensitivity: 90dB 1W/1M

Impedance: 8Ω / Power: 75W RMS / 150W peak

Input: 2 x speakeron

Active subwoofer speaker

LF: 1 x 10" 50mm 40oz

Frequency response: 45Hz-150Hz

Sensitivity: 90dB 1W/1M / Impedance: 4Ω

Power: 250W RMS / 500W peak / Input/output: XLR male & female / ¼ inch jack

MANUAL VERSION 1.0

14 / 09 / 11

For the latest instruction manual updates and information on the entire Kam range visit:

www.kam.co.uk

Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ

Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com

If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change.

Summary of content (5 pages)

PAGE 1
KOMPACT 10 Compact and portable PA speaker system M A N U A L V E R S I O N 1 . 0 14 / 09 / 11 Includes 2 x satellite speakers, active subwoofer, speaker stands and speakeron cables Satellite speakers - two way passive speaker box LF: 1 x 6.
PAGE 2
Thank you for purchasing this KAM product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. After you have read the instructions, please retain them for future reference. This unit has been tested at the factory before being shipped to you.
PAGE 3
Overview 10 inch active sub woofer with built in amplifier producing 250w RMS to the sub woofer and 2 x 75w RMS per channel to the satellite speakers. The sub woofer has 35mm pole mount cup to enable speaker pole mounting of the satellites. (Pole not included). Rear panel 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
PAGE 4
Connection Before connecting the speakers and audio source to this device, make sure that all volume/gain controls are turned fully anticlockwise in the minimum position. 1. Using the first speakeron cables supplied connect the left output socket from the sub to the speakeron input socket of the left satellite speaker. 2. Using the second speakeron cable supplied connect the right output socket from the sub to the speakeron input socket of the right satellite speaker.
PAGE 5
Satellite speaker panel When inserting speakeron plugs remember to turn the plug clockwise to lock the plug into position. To remove the spearkeron plug please slide back the metal locking catch and twist the speakeron to the anti-clockwise position before removing the plug. Speakeron plug wiring Connect the positive + to the +1 connector Connect the negative- to the -1 connector +2/-2 are not used Specifications Satellite speakers Power handling Frequency response Sensitivity (1m/1w) Max.