DE1103 PLL FM STEREO/SW.MW.LW DUAL CONVERSION SYNTHESIZED WORLD RECEIVER PLL FM STEREO/SW.MW.
POWER SUPPLY INDEX POWER SUPPLY ..........................................................1 POWER INDICATION ....................................................3 BATTERY CHARGER ....................................................4 BEFORE OPERATION.. .................................................6 SET THE CLOCK ..........................................................7 TURN ON OFF THE UNIT ...........................................8 VOLUME CONTROL & LOCAL / DX SWITCH ...................
POWER INDICATION POWER SUPPLY OPERATING ON AC Left side Lower Medium More Full 6V LO DX AM ANT Power indicator is a trapeze pattern, it is hidden when receiving programme. User can check power level by press VOL . 1. Plug the adaptor into a 220V AC power outlet. 2. Insert the adaptor s small connector plug into the DC JACK 25 . If use AC adaptor to supply power, adaptor surface may a little heat.
BATTERY CHARGE BATTERY CHARGE Install four AA rechargeable batteries with correct polarity. 2. Plug the adaptor into an 220V AC power outlet, connect the other side securely to DC Jack 25 . 3. In power off mode, hold down button VOL , in the meantime turn jog dial wheel TUNE to set charging time from 1~23 hours, then release button VOL , charging starts. Or press number button to input charging hours directly, then quickly press button VOL to confirm. 4. Indicator flashes during battery charging. 5.
BEFORE OPERATING SET THE CLOCK Check Batteries/AC Adaptor Display Time Check if batteries are inserted with correct polarity. Check if AC adaptor is connected in correct way. Please use supplied AC adaptor only. 1. When the unit is off, current time indicates in the display. 2. When the unit is on, press to display current time 5 seconds. TIME Set The Clock Check Hold Button If appears in the display, the unit is locked. All buttons except HOLD button become inoperative.
TURN ON OFF THE UNIT VOLUME CONTROL & LOCAL/DX SWITCH Volume Control Power On / Off the unit to turn on the unit manually, press again to turn it off. Each time turn on the unit, it will receive the last station you ever heard. SLEEP SLEEP The volume is divided to 64 levels 0~63 , default level after reset the unit is level 40. When adjusting volume, corresponding level number appears in the display.
BAND METER BAND CONVERSION Band Conversion After turn on the unit, press or repeatedly to select your desired band, band indicator shows corresponding band in the display. SET SLEEP TIME User can set sleep time from 1~99 minutes with the unit on or off either. BAND+ FM 75 90 MW M 49M 60M 41M Method 1 1. Press number button to input sleep time, the input number appears for 3 seconds. 2. Press to confirm within 3 seconds. 3.
SET ALARM ON SET ALARM ON OFF In power off mode, two groups of alarm on/off time can be set in 24 hours. Station volume can be set as well. Set Alarm 1 1. In power off mode, hold down button M/F for 3 seconds, hour number flashes. 2. Turn jog dial TUNE to set hour, then press M/F to set minutes. 3. Turn TUNE to set minutes, then press M/F to go into station number setting. 4. Turn TUNE to select stored station number, then press M/F to go into volume setting. 5.
TUNING INTO A STATION TUNING INTO A STATION You can use below 4 methods to find a desired station, when tuning into a AM station, appears to indicate signal strength. The more steps appear, the stronger signal it is. JOG DIAL TUNING DIRECT FREQUENCY ENTRY Direct frequency entry makes it extremely easy to tune into a station that you know its exact frequency. Frequency can be input without selecting band first. 1. Turn on the unit, press button 0~9 to enter frequency. 2.
TUNING INTO A STATION TUNING INTO A STATION AUTO SCAN TUNING MEMORY SCAN TUNING 1. Turn on the unit, change to your desired band. 2. Hold down or for more than 2 seconds, release when the frequency changes, the unit starts tuning into stations from current frequency. When a station is tuned in, scanning pauses for 3 seconds and the tuned station is heard. The scanning will continue if no further operation. 3. If a station is tuned in, you can use jog dial to fine tune. 4.
DELETE STATIONS PRESET STATIONS There are total 255 stations can be preset in two area: convenience area or hidden area. All memories are permanently stored. 1. Turn on the unit hold down STORE . 2. At the same time, turn jog dial wheel, MEM flashes and frequency changes, find the station you want to delete. 3. Continue hold down STORE , and press button TIME , current station is empty, indicator MEM changes to VOL . 1.
HOLD & BACKLIGHT TONE SELECTION & NARROW / WIDE BAND HOLD FUNCTION The hold function can be used to avoid any accidental operation when the unit is being carried or used. 1. Press button, indicator appears, hold function is activated, all buttons except HOLD button become inoperative. If the unit is on, press can turn off the unit. 2. Hold down button for 1 second to cancel hold function, disappears from the display. 3.
EARPHONES & FOLDING STAND RESET & LINE OUT LISTENING WITH EARPHONES FINE When listening to stereo reception, normally use earphones, and the speaker will stop work automatically. MUSIC LINE OUT Notes On Earphones LINE OUT You can output the radio broadcasting by connecting the unit to external appliance with a connecting cable inserted into LINE OUT jack. Volume adjustment and news/ music selection will not effect output.
USING ANTENNA RECEIVING SSB/CW 1. Turn on the unit, SSB signal can be received att the frequency range of 100~29999KHz. 2. Tune into a AM station with medium strong signal. 3. Press SSB button, turn jog dial to tune into a SSB frequency. 4. When find a SSB signal, tune the SSB FINE Knob to have the best reception. FM Reception Telescopic antenna functions as FM antenna, keep it extended and change its length and direction to find the position which gives the best reception.
USING ANTENNA SPECIFICATIONS Frequency Range SW Reception Telescopic antenna functions as SW antenna. Extending the antenna straight upward to get the best reception. Normally, set the LOCAL/DX switch 23 to DX position when listening SW programme. DEGEN 1 2 3 4 5 6 7 8 9 0 (SW) External Antenna If FM or SW reception is too weak, use supplied extra- long external antenna to improve reception. Keep the external antenna straight, insert one side to the ext.
