Suzhou eSkywireless Inc. EK810 user manual EK810 user manual Suzhou eSkywireless Inc. 0 http://www.eskywireless.
Suzhou eSkywireless Inc. EK810 user manual Information to User This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF warning The device has been evaluated to meet general RF exposure requirement.
Suzhou eSkywireless Inc. EK810 user manual 1 PREPARE before INSATLLATION 1.1 Product Display (image of EK810) 1.2 Packaging Inspection Open the box, check the terminal model is correct and the accessories are complete. Otherwise, please contact your dealer. 1.3 Install SIM Card 1.3.1 Selection of SIM Card The EK810 is a GPS/GPRS terminal, and it needs a LTE/GPRS SIM card. please reference dealer’s opinion to select carrier. 1.3.
Suzhou eSkywireless Inc. EK810 user manual The terminal standard power supply is 12V-36V. the red line is the positive power supply and the black line is the negative power supply. Note: Please select the negative power line grounding alone. 2 Steps of AT Setting before tests Start hyper-terminal connection as follows. 1)select the comm port of PC through which EK810 is connected with PC, as the follows 3 http://www.eskywireless.
Suzhou eSkywireless Inc. EK810 user manual 2) In Port Settings, change communication speed (bits per second) to 115200bps, 3)Final step is the certain AT settings necessary after 1st running of downloaded program. 3.1) Start connection first 3.2) Restart EK810 3.3) After you see the "IIII"as the following picture, start setting. 4 http://www.eskywireless.
Suzhou eSkywireless Inc. 5 EK810 user manual http://www.eskywireless.
Suzhou eSkywireless Inc. EK810 user manual 3 INSTALL and OPERATION 3.1 Installation Method The terminal is GPS positioning products, it is recommended that you follow the instructions to install. Note: 1) The following installation order, please do not inverted. 2) During the installation process, please do not supply the terminal. The terminal installation is divided into hidden installation and open installation. When the terminal is using special vehicles, hidden installation is recommended.
Suzhou eSkywireless Inc. EK810 user manual ① Power connector, connecting terminal with the power connector of wire harness, as picture above. ② Power lines, the red line is the positive power supply and the black line is the negative power supply. 3.1.1 Open Installation The power connecting line we selected is provided by original cigarette lighter cord. 3.1.2 Hidden installation The power connecting line we selected is provided by original the main power core.
Suzhou eSkywireless Inc. EK810 user manual ① Avoid put together with the emission source, for example, reversing radar, anti-theft devices and other on-board communications equipment. ② As for fixing the terminal, you can bound with ties or stick with wide sponge strength double-faced adhesive. ③ The terminal has GSM antenna and GPS antenna,so the installation should ensure that the EK810face up (that is GPS toward the sky). Besides, there is no on-metallic object that obscures above the terminal.
Suzhou eSkywireless Inc. EK810 user manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.