Suzhou eSkywireless Inc. ES811 user manual EK811 user manual Suzhou eSkywireless Inc. 0 http://www.eskywireless.
Suzhou eSkywireless Inc. ES811 user manual Information to User This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF warning The device has been evaluated to meet general RF exposure requirement.
Suzhou eSkywireless Inc. ES811 user manual 1 PREPARE before INSATLLATION 1.1 Product Display (image of EK811) 1.2 Packaging Inspection Open the box, check the terminal model is correct and the accessories are complete. Otherwise, please contact your dealer. 1.3 Install battery 1.3.1 Selection of battery The EK811 is a Bluetooth terminal, and it needs a button battery. please reference dealer’s opinion to select battery. 2 http://www.eskywireless.
Suzhou eSkywireless Inc. ES811 user manual 1.3.2 Installation battery Open the terminal cover, and make sure the battery’s positive and negative, then insert the battery properly, and close the back cover. 1.4 Power On The terminal standard power supply is 3V. 2 Steps of AT Setting before tests Start hyper-terminal connection as follows. 1)select the comm port of PC through which EK811 is connected with PC, as the follows 3 http://www.eskywireless.
Suzhou eSkywireless Inc. ES811 user manual 2) In Port Settings, change communication speed (bits per second) to 115200bps, 3)Final step is the certain AT settings necessary after 1st running of downloaded program. 3.1) Start connection first 3.2) Restart EK810 3.3) After you see the "IIII"as the following picture, start setting. 4 http://www.eskywireless.
Suzhou eSkywireless Inc. 5 ES811 user manual http://www.eskywireless.
Suzhou eSkywireless Inc. ES811 user manual 3 INSTALL and OPERATION 3.1 Installation Method The terminal is Bluetooth products, it is recommended that you follow the instructions to install. Note: 1) The following installation order, please do not inverted. 2) During the installation process, please do not supply the terminal. The terminal installation is divided into hidden installation and open installation. When the terminal is using special vehicles, hidden installation is recommended.
Suzhou eSkywireless Inc. ES811 user manual 3.1.1 Open Installation The power connecting line we selected is provided by original cigarette lighter cord. 3.1.2 Hidden installation The power connecting line we selected is provided by original the main power core. And the red line has a fuse box (3A fuse) which can play a short circuit overcurrent protection role. 3.
Suzhou eSkywireless Inc. ES811 user manual ② As for fixing the terminal, you can bound with ties or stick with wide sponge strength double-faced adhesive. ③ The terminal has GSM antenna and GPS antenna，so the installation should ensure that the EK810face up (that is GPS toward the sky). Besides, there is no on-metallic object that obscures above the terminal.
Suzhou eSkywireless Inc. ES811 user manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
