Electric Coffee Grinder Model: KF2010, KF2020, KF2030 Operating and Safety Instructions - FOR HOUSEHOLD USE ONLY – READ ALL INSTRUCTIONS BEFORE USE
IMPORTANT SAFETY INSTRUCTIONS Definitions Whenever used, the following identify safety and property damage messages and designate a level of hazard seriousness. - This is the safety alert symbol. It alerts you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER – Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
● Check inside bowl for presence of foreign objects before each use. SAVE THESE INSTRUCTIONS AUTION - To reduce the risk of personal injury and/or C product/property damage: ● This product is intended solely for indoor, non-commercial, non-industrial use in grinding coffee beans. Do not use the product outdoors or for any other purpose. ● Do not allow the Power Cord to hang over the edge of a table or counter, where it may be tripped over or pulled.
PARTS Before First Use Clean the Cover, Bowl, and Blade as described in the “Care and Maintenance” section. To Use 1. Make sure the Coffee Grinder is unplugged. 2. Remove the Cover by lifting it up. Add up to 2.5 oz. of coffee beans to the Bowl. 3. Close the Cover and plug the Power Cord into a standard 230-volt AC electrical outlet. 4. To operate, press and hold the ON/OFF Button. Release the ON/OFF Button to stop grinding. NOTICE: Do not operate for more than 30 seconds at a time.
. Unplug the Power Cord from the electrical outlet and remove the Cover. Remove the coffee grounds from the Coffee Grinder. CARE AND MAINTENANCE WARNING: ● Always make sure the Coffee Grinder is unplugged from the electrical outlet before cleaning it. ● This product was permanently lubricated at the factory before shipping and will not require further lubrication for the life of the product. Additional lubrication of motor parts could increase the risk of a fire hazard.
