Tech Support: 1-800-KLIPSCH The AudioRock speaker uses a 12 volt Lithium Ion Battery for operation. Please review the following safety instructions before use: Li Ion Battery Safety Instructions: Misuse can result in the batteries short-circuiting, the insulator melting and damage to the safety valves or safety mechanisms, leading to leakage, heat generation, or rupturing. Please observe the following precautions when using batteries.
Tech Support: 1-800-KLIPSCH IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. Keep these instructions. Heed all Warnings. Follow all instructions. 2. Do not use this apparatus in water. The apparatus can be exposed to rain, snow or any weather element without risk of injury or damage. Do not submerge in water or other liquids. The product is water resistant not water proof. 3. Clean only with a wet rag or light spray of water from garden hose.
Tech Support: 1-800-KLIPSCH Congratulations Thank you for choosing the wireless, portable AudioRockTM from Klipsch Speakers. With proper installation and operation, you will enjoy years of trouble-free use. Klipsch Speakers offers numerous loudspeakers for use inside or outside your home. To see the complete Klipsch Speakers product assortment, visit us on the Internet at: www. Klipsch.com.
Tech Support: 1-800-KLIPSCH Table of Contents AudioRockTM Overview.........................................................................6 What is in this box................................................................................8 Installation Considerations................................................................9 Selecting Locations...............................................................................9 Setting up Zones............................................................
Tech Support: 1-800-KLIPSCH AudioRockTM Overview This wireless portable AudioRockTM is intended to install in a few minutes and since it runs on batteries it increases the flexibility of where these speakers can be used. The system can use up to 8 wireless AudioRocks (when used with a Klipsch Premium Loudspeakers LightSpeakerTM transmitter) to provide audio to your entire outdoor area.
Tech Support: 1-800-KLIPSCH find a standard Edison socket. They can provide “green” lighting and outstanding sound throughout your home. The LightSpeakers™ are available from your retailer or at www.Klipsch.com. The entire system provides even greater flexibility to you as the owner; because you can take it with you if you move. If you do need to remove it, it leaves no trace that the system was ever installed or used.
Tech Support: 1-800-KLIPSCH What’s in this box Wireless AudioRockTM Owner’s Manual One Charger One Rechargeable Lithium-ion Battery NOTE: The AudioRockTM can only be used with the Klipsch Premium Loudspeakers wireless LightSpeakerTM transmitter. It cannot be used or operated without the LightSpeakerTM transmitter. Remote and transmitter sold separately.
Tech Support: 1-800-KLIPSCH Installation Considerations Remember the outdoor line-of-sight range of the system is approximately 125-225 feet, so as long as the distance from the transmitter to the farthest AudioRockTM, in any direction, is less than 125-225 feet, the placement of the transmitter is up to you. Selecting AudioRockTM Locations Your wireless AudioRock can be placed anywhere it is convenient in your outdoor listening areas.
Tech Support: 1-800-KLIPSCH Setting Up Zones If you have more than one AudioRockTM and you want to setup separate listening zones in your outdoor area, you have the option of setting up a second zone. An audio zone is any area or group of areas where you want the same audio source playing and want the volume of the speakers to be about the same. If you want an area to have different volume level or play a different set of music then use the two zone option.
Tech Support: 1-800-KLIPSCH Preparing AudioRockTM for Installation Please charge your battery for your rock by plugging in the power supply and inserting the battery into the charger. Allow at least 8 hours for the first charge. NOTE: Leaving the battery in the charger for periods longer than 24 hours may reduce battery life. When an uncharged battery is placed in the charger the LED on the front of the charger will shine RED; when charging is complete the LED will turn green.
Tech Support: 1-800-KLIPSCH Installation Instruction Step 1: After the battery has been charged, install it into the battery compartment. Be sure it is pushed all the way in. Step 2: Be sure the zone switch on the back of your AudioRock is set to zone 1 unless you are setting up a 2 Zone system. If you intend to set up a two zone system be certain the zone switch is set the number corresponding to the zone you intend to place it.
Tech Support: 1-800-KLIPSCH Pairing the AudioRockTM to the Transmitter Before you can begin using and enjoying your new portable wireless AudioRockTM system it is necessary to “teach” your AudioRockTM the identity of the transmitter you are using; this teaching is called “pairing” and is very easy to do. Step 1: With the Transmitter power on (LED on front will be lit), find and press the pairing button on the front of the unit. You may need a sharp object like a pen to press the button in.
Tech Support: 1-800-KLIPSCH Step 3: When all units are paired, you are ready to start using and controlling the system. Step 4: If you have more AudioRocks, LightSpeakers or other speakers designed to work on the LightSpeaker network make sure they are all paired, if not pair them per the instructions in the owner’s manual for that speaker. When all units are paired, you are ready to start enjoying your entire LightSpeaker network. When the pairing light turns solid green, the pairing is complete.
Tech Support: 1-800-KLIPSCH Operating and Controlling Your AudioRockTM Main Rock Speaker Electronics Battery compartment accepts supplied rechargeable battery providing 8-16 hours of playback. Playback time will depend upon how loud you listen to your music; the lower the average level the longer the battery will last. Built-in wireless receiver allows reception and control of the loudspeaker up to 125-225 feet away from your LightSpeakerTM transmitter and remote control.
Tech Support: 1-800-KLIPSCH AudioRock Specifications: This stereo outdoor wireless rock speaker with 5¼” woofer is optimally tuned for outdoor performance. The sound is electronically equalized to provide superior acoustic performance in open-air environments. Neutral Granite styling allows this system to blend unobtrusively into most outdoor environments. This single-speaker stereo unit provides dual-channel audio from a single enclosure.
Tech Support: 1-800-KLIPSCH Warranty - Home and Commercial Audio (U.S.) The Warranty below is valid only for sales to consumers in the United States. KLIPSCH, LLC (“KLIPSCH”) warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of one (1) year from the date of purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this product or any defective parts (excluding electronics and amplifiers).
Tech Support: 1-800-KLIPSCH REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
THIS DEVICE COMPLIES WITH FCC RULES PART 15. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) This device must accept any interference received including that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Tech Support: 1-800-KLIPSCH Klipsch Worldwide Corporate Headquarters 3502 Woodview Trace, Suite 200 Indianapolis, IN 46268 For more detailed installation instructions go to www.klipsch.com Klipsch Technical Support Toll Free: 1-800-KLIPSCH (1-800-554-7724) Monday - Friday, 8:00 AM - 5:30 PM EST E-mail: technicalsupport@klipsch.