CONGRATULATIONS ON YOUR SELECTION OF THE KPH-2200 (FAMILY RADIO) iris one the most sophisticated and reliable two way Family radios available.
BB FEATURES Your KPH-2200 Family Radio is a portable, easy to use, two-way radio that you can carry almost anywhere. list skillfully constructed to give you reliable communications for many different applications. The KPH-220 is ideal for use around the house, in your boat, on hunting and camping trips, on the ski slopes or at.
wh Eom Power On/OH Volume Control: Floater clockwise to turn the unit on and increase the listening volume level, Rotate counterclockwise to decrease the fastening volume level or turn the transceiver off, Push-to-Talk (PTT) button: Press to transmit, Release to receive, Monitor Button {M}: Press and hold to bypass the squelch and listen to channel activity.
El LCD DISPLAY AND OPERATION 1 2 3 10—BW J) 7138s 11——1RGB BUSY 4 Hod ThekF
1 14 Displays the current channel number {110 14). 2 38 Displays the current CRATERS number (1 to 38), 8 E8 Whippersnapper scanning channels. 4 Appears while transmitting. 5 [EZ Appears while receiving. 6 BE Powers aver Appears when the battery saver mode is active 7 a Appears while the Button Conformation Tone features Is activate. 8 fn Appears while the keypad is locked 9 Flashes when the battery voltage is low, The transceiver will also beep to indicate low battery voltage. fo.
EB BATTERY INSTALLATION Your-2200 requires three "AA" alkaline cells or three rechargeable “AA” nickel cadmium cells. Alkaline batteries will provide the best performance from your transceiver. Remove the battery cover by releasing the clasp at the bottom of the unit and lifting the cover from the battery | compartment. Observe the polarity symbols | inside the battery tray when installing the batteries. can damage the uni.
Busing your KE=2200 To Select a Channel Use the UP and DOWN buttons to select the desired channel from {to 14, The current channel! setting will be shown on the display. NOTE: the keypad lock “0 Leon is shown on the display, outlined to unlock the keypad.
To Receive 1. Turn the power on. 2. Hatcheck battery condition on the display. if the icon is displayed, charge or replace the batteries. 3. Set the desired channel and CSS code. 4. Adjust the volume control to the desired listening volume . by pressing and holding the monitor button while muting the volume control knob. 5. Hellbent icon will be displayed when the transceiver detects an incoming transmission.
To Transmit 1. Set the desired channel. 2. Antidepressant PTT {Push-to-Talk) button while speaking slowly and clearly in a normal voice, approximately 210 3 inches from the microphone, 3. Helicon wil be displayed while transmitting. 4. Release the PTT button when vou finish speaking to receive incoming signals.
Menu Button Pressing this button will sequentially select among the following features, Continuous Tone Coded Squelch System fie), channel scan (Scan, button conformation tones (BP) and the keypad lock (LC). Each successive press of the button will advance the display to the need feature in order. If no buttons are pressed for 8 seconds, the unit will rectum to standby mode and the display will indicate the current channel, Pressing the PTT or Monitor button will also rectum to the standby mode.
To select a CSS squelch code, press the menu bunion once or until “tc” is shown on the display. The small flashing numbers to the right represent the Demurral squelch code setting. “OF” (off) indicates that the CSS system is off, Use the UP and DOWN buttons to select the desired squelch code number, To allow the transceiver 1g receive all messages on a particular channel select the “Op {off) selling.
ets Channel! Scan : This feature allows the transceiver to automatically check all 14 channels for activity. Press the menu button twice or until “BC” is shown on the display. Pressing the UP or DOWN bunions will cause the transceiver to immediately begin scanning the channels for activity. When a signal is raveled, the unit will pause on that channel for the duration of the signal and an additional 5 seconds, If no other signals are received during this period, the transceiver will resume scanning.
Pm Button Conformation Tones The transceiver can be set io confirm each bunion press with a beep tone or, if the user prefers, these confirmation tones can be turned off. Whenever the tones are on, the #4 cotillion be shown on the display. To tum the beep tones on or off, press the menu button three times or until “BF shows on the display. The current setting will be Indicated by the two smaller characters tithe right {"on” or “of (off). Press the UP or DOWN bunion to change the sating.
Keypad Lock To prevent the transceiver's settings from being inadvertently changed, the keypad can be locked. This will inhibit the function of the UP and DOWN buttons. This is useful when the is being used by small children, or when the unit is keratin pocket. A key icon will be shown on the display whenever the keypad is locked. To lock or unlock the keypad, press the menu button four dimes or until “Lo is shown on the display. The current setting will be indicated byte two smaller characters tithe right.
BB WARNING # Remove the subalterns from the transceiver if it is not exacted fo be used for long periods. This will eliminate the possibility of battery acid leaking from the batteries and corroding the transceiver, 8B Avoid exposing the unit to water or extremes of temperature, & Do not use this device In or near a mining facility, which uses remotely triggered explosives or in areas labeled “Blasting Area”, Premature or accidental detonation may result.
Bl SPECIFICATIONS Channels: 14 Output Power: 500 mw ERP Battery Life Alkaline: 30-35 Hours Ni Cd: 13 Hours Powell Source: 4.5v DC Channel Frequencies: Channel MHz Channel MHz 1 462.5625 & 467.5625 a 462.5875 9 467.5875 3 482.6125 10 467.6125 4 462.6375 ] {1 467.6375 5 462.6625 12 467.6625 8 462.6875 13 467.6875 7 462.7125 14 467.