Operation Instructions

Operation instructions

1. After matching the key to the car, press 1the unlock key for 2 seconds to open the

door and press 2the lock key for 2 seconds to close the door.

2. The ignition key is used to manually unlock and start the car.

3. Pressing the PANIC button to start the car

Product parameters

Rated voltage

DC 3V

Working current

<5mA

Operating voltage

1.8V~3.6V

Transmit power

<-20dbm

Key operation force

200±50g

Operating temperature

-5°C +45°C

Stand-by current

5uA

transmitting frequency

433.92M±75KHZ

Modulation

ASK

Battery

CR2032

Key durability

More than 100,000 times

1 key:Unlock key

2 key: Lock key

3key: Trunk key, used to

open/close the trunk

5 key: used for searching key

4 key: used for engine start

PAGE 1
key:Unlock key 2 key: Lock key 3key: Trunk key, used to open/close the trunk 4 key: used for engine start 5 key: used for searching key Operation instructions 1. After matching the key to the car, press 1the unlock key for 2 seconds to open the door and press 2the lock key for 2 seconds to close the door. 2. The ignition key is used to manually unlock and start the car. 3.
PAGE 2
FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.