INSTALLATION GUIDE Confidant RFID Kit 1 3rd party Rose Mount & Back Plate PK3616
Confidant RFIDTM Installation Instructions (Kit 1) IMPORTANT: Wear Safety glasses before starting the replacement of parts. Installation Steps: 1. Tools Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Check for Correct Inventory Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3rd Party Rose Mount (Key Override) . . . . . . . . . . . . . . .
1- Tools A B C D E A - Screw Driver Small Flat B - Screw Driver Phillips #2 C - Screw Driver Torx T-20 D - Hexagonal Key 3 mm E - 25mm / 19mm / 12mm / 10mm Drill Bit P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 3
2- INVENTORY - 3 rd Party Rose Mount (Key Override) 3rd Party Inventory Kit 3rd Party P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 4
2- INVENTORY - 3 rd Party Rose Mount (No Key Override) 3rd Party Inventory Kit 3rd Party PK K3 36 6X 1 6X__008_ P 7_1122 •• CCO ON NFFIIDDAN E NT T IIN NS ST TAL ALL LAT ATIIO ON NG GU UIID DE E 5 5
2- INVENTORY - 3 rd Party Back Plate Mount (Key Override) 3rd Party Inventory Kit 3rd Party P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 6
2- INVENTORY - 3 rd Party Back Plate Mount (No Key Override) 3rd Party Inventory Kit 3rd Party P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 7
3- REMOVE BATTERY HOLDER A Unscrew B Remove Door C Unclip Battery Holder D Remove Battery Holder 4- ALIGN POSTS WITH MORTISE P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 8
5- SPINDLE - Selection & Installation 1- Choose Correct Spindle 2- Check Handing: Adjust for Right Hand (RH) or Left Hand (LH) RH 1X 70mm 1X 82mm 3- Insert Spindle: Check groove is in line with the inside lever set screw position.
6- INSTALL OUTSIDE LEVER Left Hand Right Hand P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 10
7- INSTALL LOCK ON DOOR - Back Plate Mount (Key Override) Optional Optional 7- INSTALL LOCK ON DOOR - Rose Mount (Key Override) Optional Optional P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 11
7- INSTALLATION ON DOOR - Back Plate Mount (No Key Override) 7- INSTALLATION ON DOOR - Rose Mount (No Key Override) P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 12
8- PLUG BATTERY HOLDER ✓ ✗ 9- TEST LOCK FUNCTIONALITY A - Present Test Keycard B - Check Green & Red Lights Flash C - Rotate Outside Lever to Check Bolt Retraction D - Release Outside Lever, Should Move Freely E - Rotate Inside Lever to Check Bolt Retraction F - Check Bolt Projection from Thumbturn & Key P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 13
10- PROGRAM LOCK - With Jack Cable 11- INSTALL BATTERY DOOR A B C D P K 3 6 1 6 _ 0 8_ 1 2 • C O N F I D AN T I N S T AL L AT I O N G U I D E 14
Technical Support: 1.800.906.4526 Customer Service: T: 1.877.468.3555 F: 514.735.6589 General Information: www.ilcolodging.com Online Consumable Orders: www.keycard.com To access all of our easy steps, please visit our Support Website: http://connect.kabalodging.com Printed in Canada PK3616-T_08_12 Kaba Ilco Inc. 7301 Boul.
