TM Smart Door Lock ML2 Programming Instructions EN VER 1.0 Alfred International Inc. reserves all rights for the final interpretation of the following instructions.
Search “Alfred Home” in either the Apple App Store or Google Play to Download Alfred Home
STATEMENT FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
WARNING Failure to follow the below instructions could result in damage to the product and void the factory warranty. The accuracy of the door preparation is critical to allow proper functioning and security of this Alfred Product. Misalignment of the door prep and lock can cause performance degradation and hinder the security functions of the lock. Finish Care: This lockset is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long-lasting finish.
SPECIFICATIONS Front assembly A Back assembly B E C F G H D I J A: Status indicator(Red) E: Wireless module port B: Status indicator(Green) F: Handing switch C: Touchscreen keypad G: Reset button D: Low battery indicator H: Internal indicator I: Multi-functional button J: Thumb turn 3/15
DEFINITIONS Master Mode: The Master Mode can be entered by entering “**+Master PIN Code+#” to program the lock. Master PIN code: The Master PIN Code is used for programming and for feature settings. The default Master PIN Code must be changed after installing. The Master PIN Code will also operate the lock in Away Mode and Privacy Mode. Simple PIN Code Rule For your security, we have set up a rule to avoid simple pin codes that can easily be guessed.
DEFINITIONS Away(Vacation) Mode This feature can be enabled in Master Mode or through Zigbee module(Sold separately). It restricts all User PIN Code accesses, Bluetooth Keys is disabled too. The feature is designed to be used when all occupants are out of the house and no entry into the home should be made. Away(Vacation) Mode will be disabled when user disable the feature on centered control platform, or after entering the Master PIN code at the lock.
DEFINITIONS Access Card The Access Card operates the Lock. They can be added on the lock in Master Mode Menu, and deleted in Master Mode Menu or in Alfred Home App. You can assign an Access Card to specific members within the Alfred Home App. Maximum Number of Access Card is 250. Privacy Mode(Inside Deadlock) Enable by holding the Multi-function button on the Back assembly of lock for 3 Seconds.
FACTORY DEFAULT SETTINGS Settings Factory Defaults Master PIN Code 12345678 Auto Re-lock Disabled Speaker Enabled Wrong Code Entry Limit 10 times Shutdown Time 5 mins Bluetooth Disabled(Energy saving) Language English LOCK OPERATIONS -Enter Master Mode 1.Touch Keypad screen with your hand to activate lock. (Keypad will illuminate) 2.Press "*" twice 3.
LOCK OPERATIONS -Add User PIN Codes User PIN Codes can be programmed in Settings options on the Alfred Home App or in Master Mode Menu at the Lock. Master Mode Menu Instructions: 1. Enter Master Mode. 2. Enter "2" to enter Add User menu 3. Enter "1" to add User PIN code 4. Enter New User PIN Code followed by "√" 5. Repeat step 4 to confirm PIN Code. 6. To continue adding new users, repeat steps 4-5. When Registering User Pin Codes, the codes must be entered within 10 Seconds or the Lock will time out.
LOCK OPERATIONS -Delete User PIN code User PIN Codes can be programmed in Settings options on the Alfred Home App or in Master Mode Menu at the Lock. Master Mode Menu Instructions: 1. Enter Master Mode. 2. Enter "3" to enter delete User menu 3. Enter "1" to delete User PIN Code 4. Enter User PIN code number or User PIN code followed by "√" 5.
LOCK OPERATIONS -Silent Mode/Language Settings Silent Mode or Language Change Feature can be programmed in Settings options on the Alfred Home App or in Master Mode Menu at the Lock. Languages Master Mode Menu Instructions: 1.English 1. Enter Master Mode 2.Spanish 2. Enter "5" to enter Languages Menu 3.Portuguese 3. Enter 1-5 to Enable a select voice guide language 4.French (see language choices in table to the right) 5.
LOCK OPERATIONS -Bluetooth Settings(Power Save) Bluetooth Setting (Power Save) Feature can be programmed in Settings options on the Alfred Home App or in Master Mode Menu at the Lock. Master Mode Menu Instructions: 1. Enter Master Mode 2. Enter “7” to enter Bluetooth Settings Menu 3.
PROGRAMMING TREE FOR MASTER MODE MENU 1 Modify Master PIN code 2 Add users 1 Add user PIN code 3 Delete users 1 Delete user PIN code 1 Disable 4 Auto re-lock 2 Enable(30secs) 3 60secs 4 120secs Master Mode 5 180secs 1 English 2 Spanish 3 Portuguese 5 Language 4 French 5 Chinese 6 Enable Away Mode 6 Disable speaker 1 Enable Bluetooth 7 Bluetooth settings 2 Disable Bluetooth 1 Pair 8 Network settings 12/15 2 Unpair
HOW TO USE Unlock the door 1. Unlock the door from outside - Use PIN code key User PIN code √ - Place palm over lock to wake up the keypad. - Input User PIN Code or Master PIN Code and press “√” to confirm. 2. Unlock the door from inside - Manual thumb turn Turn the thumb turn on Back Assembly(Thumb turn will be in the vertical position when unlocked) Lock the door 1.
HOW TO USE Enable Privacy Mode 3 secs To Enable Privacy Mode (Inside Deadlock), Push and HOLD the Multi-function button on Back Assembly for 3 Seconds. When Privacy mode is enabled, it restricts ALL accesses, including Master Pin Code, User PIN Code, Access Card and Digital Bluetooth Keys sent through APP. This feature will be disabled automatically after unlock the device with the lever handle from the inside or override key from the outside.
HOW TO USE Reset to factory default settings Must be completed on Lock and cannot be done through the Alfred Home APP 1. Open the door and keep the lock in “unlock” status 2. Open battery box and find the reset button. 3. Use a thin object to press and hold the reset button. 4. Keep holding the reset button and remove a battery from battery box then replace it. 5. Keep holding the reset button down until you hear the lock beep (Can take up to 10 seconds).
ISED Statement English: This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
