User manual Dishwasher IG6504.
Contents Safety information Product description Control panel Use of the appliance Setting the water softener Use of dishwasher salt Use of detergent and rinse aid Loading cutlery and dishes 2 4 5 6 6 7 7 8 Setting and starting a washing programme 10 Washing programmes 10 Care and cleaning 11 What to do if… 12 Technical data 14 Environment concerns 15 Subject to change without notice Safety information Before the installation and use, read this manual carefully: • For your safety and the safety of you
• Make sure that the spray arms can move freely before you start a washing programme. • The appliance can release hot steam if you open the door while a washing programme operates. There is a risk of skin burns. • Do not remove the dishes from the appliance until the washing programme is completed. Care and cleaning • Before you clean the appliance, deactivate it and disconnect the mains plug from the mains socket. • Do not use flammable products or products that can cause corrosion.
• Make sure that the electrical information on the rating plate agrees with the power supply. • Always use a correctly installed shockproof socket. • Do not use multiple plugs and extension cables. There is a risk of fire. • Do not replace or change the mains cable. Contact the service centre. • Make sure not to squash or cause damage to the mains plug and cable behind the appliance. • Make sure that there is access to the mains plug after the installation.
3 4 5 6 Salt container Detergent dispenser Rinse aid dispenser Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm Control panel 1 2 5 1 2 3 4 5 3 4 Programme marker On/off indicator light Indicator lights Start/cancel button Programme knob Indicators Washing phase indicator. It comes on when the washing phase or the rinsing phases operate. Drying phase indicator. It comes on when the drying phase operates. End indicator.
Use of the appliance 1. Be sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. 2. Fill the salt container with dishwasher salt. 3. Fill the rinse aid dispenser with rinse aid. 4. Load cutlery and dishes into the appliance. 5. Set the correct washing programme for the type of load and soil. 6. Fill the detergent dispenser with the correct quantity of detergent. 7. Start the washing programme.
2. Turn the programme knob clockwise until the programme marker is aligned with the first washing programme. 3. Release the start/cancel button when the on/off indicator and the start/cancel indicator start to flash. • At the same time, the end indicator flashes intermittently. The number of flashes shows the setting of the water softener (example: 5 flashes / pause / 5 flashes = level 5). 4. Press the start/cancel button again and again to change the setting.
5. Close the detergent dispenser. Press the lid until it locks into position. Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing programmes when you use the detergent tablets to fully remove the detergent. Use of rinse aid Rinse aid makes it possible to dry the dishes without streaks and stains. The rinse aid dispenser automatically adds rinse aid during the last rinsing phase.
Lower basket Put the saucepans, lids, plates, salad bowls and cutlery in the lower basket. Arrange the service dishes and large lids around the edge of the basket. Use the cutlery grid. If the dimensions of the cutlery prevent use of the cutlery grid, you can easily remove it. Upper basket The upper basket is for plates (maximum 24 cm in diameter), saucers, salad bowls, cups, glasses, pots and lids. Arrange the items to let water touch all surfaces.
1. Move the front runner stops (A) out. 2. Pull the basket out. 3. Put the basket in the upper position. 4. Put back the front runner stops (A) in their initial position. Caution! If the basket is in the upper position, do not put cups on the cup racks. Setting and starting a washing programme Select and start a washing programme 1. Close the door. 2. Select a washing programme. Refer to 'Washing programmes'. – The on/off indicator light comes on. 3. Press the start/cancel button.
Programme and position of the programme knob 1) 2) Type of soil Type of load Programme description Normal soil Crockery and cutlery Prewash Wash 65 °C Rinses Dry Fresh soil Crockery and cutlery Wash 65 °C Rinse Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this programme.
1. To unlock the filter system, turn the handle on the microfilter (B) approximately 1/4 counterclockwise. 2. Remove the filter system. 3. Hold the coarse filter (A) by the handle with the hole. 4. Remove the coarse filter (A) from the microfilter (B). 5. Remove the flat filter (C) from the bottom of the appliance. 6. Clean the filters below running water. 7. Put the flat filter (C) to its initial position. Make sure that it assembles correctly under the two guides (D). 8.
Warning! Deactivate the appliance before you do the checks. Malfunction The appliance does not fill with water. The appliance does not drain the water. Possible cause Clean the water tap. The water pressure is too low. Contact your local water authority. The water tap is closed. Open the water tap. The filter in the water inlet hose is blocked. Clean the filter. The connection of the water inlet hose is not correct. Make sure that the connection is correct. The water inlet hose is damaged.
Problem Possible cause Possible solution The spray arms could not turn freely because of incorrect arrangement of the load. Make sure that an incorrect arrangement of the load does not cause a blockage of the spray arms. The filters are dirty or not assembled and installed correctly. Make sure that the filters are clean and correctly assembled and installed. The quantity of detergent was not sufficient or missing. Make sure that the quantity of detergent is sufficient.
Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
156954860-A-142011
