User's Manual

BarkWise™ Instruction Manual
Included In Your Package
Before getting started
What is ultrasonic sound?
Ultrasonic sound frequencies are outside the range of human
hearing. However, dogs can hear ultrasonic sound which is
attention grabbing and irritating to dogs. Ultrasonic sound has
been used for over a century to safely and humanely train dogs.
How does vibration work?
BarkWise™ vibrates in response to your dog’s barking. This cre-
ates a slight annoyance and takes the dog’s focus o of barking.
How long will training take?
Bad habits are sometimes hard to break. While some dogs may take
longer, most will start taking to the training within two weeks.
What size of dogs can BarkWise™ be used on?
There are currently no restrictions for what size of dogs the
BarkWise can be used. However, the collar strap can t dogs
with a neck size of 6” up to 24”.
Is BarkWise safe?
Absolutely. Unlike other training collars such as shock,
BarkWise™ uses safe and humane technology to curb your
dog’s barking.
How BarkWise™ works
BarkWise™ detects barking with an internal microphone and
responds by emitting combinations of ultrasonic or audible
sound and vibration. The combinations create an irritating
sensation that disrupts barking. After a short training period,
your dog will begin associating his barking with this
annoyance and learn to be quiet. It’s completely safe and
humane bark control.
Getting Started
1. Charging the BarkWise™
The BarkWise™ comes with a charger. Simply plug this into the
collar and plug the adapter into an outlet. The blue LED light
will indicate that BarkWise™ is charging. The red LED ashes
when BarkWise™ needs charging (charge time is approx. 2hrs).
2. Turn the BarkWise™ on /o
The power button is located on the top of the unit. Power it ON
by pressing and holding the button for 3 seconds. The unit will
beep 3X with a ashing blue light. BarkWise™ is now activated.
Power OFF by pressing and holding the button for 3 seconds. It
will beep 1 time and the red light will ash.
3. LED lights
• Blue LED Indicator: primary indicator light that is emitted
at various operational settings of the unit, e.g. vibration,
ultrasonic, and audible.
• Red LED Indictor: enabled during the power OFF stage of
the unit
Power Button
Blue LED Red LED
BarkWise™ bark control device Nylon dog collar Remote control
Please use a CE or EN 60950 approved adapter for charging. The adapter output should be DC 5.5V, 0.5A.