User's Manual

ManualsBrandsK-Mark Industrial ManualsElectronicsMantis Pro400 Game Caller Base with Bluetooth

Mantis Pro Base Features

Power ON/OFF

• Switch located on the rear right side of housing that powers the

main device ON/OFF.

• Power Indicator LED located on the rear right side of housing.

USB Port

• Micro USB port allows access to the SD Card memory while an

SD Card is inserted. Sound files can be viewed, edited, added,

and re-arranged.

• Micro USB does not allow access to internal memory.

Bluetooth LED

• When unit is pairing mode, the blue LED will blink every 3

seconds. When paired, LED will be constant on.

Memory and SD Card

• 1GB Internal memory with 400 premade sounds

• When SD Card is inserted, internal memory and SD Card can be

accessed. All sound files on the SD Card must be located in the

Root folder. The Mantis PRO 400 unit can only play .MP3 files

from an SD Card

Speaker Output L/R

• Connect with 3.5mm Mono Male To Male Cable

• For best results, Auxiliary Speakers should be self-powered

Channel Select

• 4 Position slide switch (A,B,C,D) to select 1 of 4 operational

channels

• Base unit and remote must be on the same channel to

communicate

Aux Power – 12V DC Power In

• Power can be supplied via external power source.

Decoy Sync Port

• When connected via SYNC cable, the motorized Mantis PRO

Decoy (Sold Separately) moves when a call is being played.

Remote Slot

• Remote slot holds the remote under the Mantis Handle

attaching to the main housing.

• Slide and locks into place, preventing the remote from falling

out.

Decoy Slot

• Decoy adapter slot on rear of unit designed to interface with

Mantis PRO Decoy (Sold Separately).

MANTIS PRO 400

User Manual

WRC-MP400

Summary of content (5 pages)

PAGE 1
MANTIS PRO 400 User Manual WRC-MP400 Mantis Pro Base Features Power ON/OFF • • Switch located on the rear right side of housing that powers the main device ON/OFF. Power Indicator LED located on the rear right side of housing. USB Port • • Micro USB port allows access to the SD Card memory while an SD Card is inserted. Sound files can be viewed, edited, added, and re-arranged. Micro USB does not allow access to internal memory.
PAGE 2
Remote Functions and Features Quick Sets Favorites Button • • There are 3 Quick Set profiles. Each Q-Set has a Sequential Play setup and an Overlay setup. Pressing Q1-Q3 will arm the quick set. Holding Q1-Q3 will prompt to clear the Quick Set. User defined sound profile that contains up to 20 saved sounds. Pressing “FAV” will navigate to the Favorites menu. Holding “FAV” will prompt to clear all saved sounds. Call Library • Back Button • Returns to the previous screen (if applicable).
PAGE 3
Mantis Pro Operation POWER ON Slide the power switch on the base to power the unit on. Press and hold the power button on the remote to power the remote on/off. Be sure to extend the Volume remote antenna for maximum range. Repeat On Level Decoy On Battery Level MAIN MENU Main Menu is the Default Screen when the remote is powered on. Three menu options available: Call Library, Settings, and Bluetooth.
PAGE 4
Bluetooth When Bluetooth is selected, the base unit will go into pairing mode. When in pairing mode, the base unit’s blue LED will blink every 3 seconds. Once paired with a device, the LED will be constant on and all functions will be controlled through the paired device. Holding enter on the remote will re-enter pairing mode. Favorites 20 different sound files can be saved to the Favorites for quick access.
PAGE 5
FCC Compliance Model: WRC-MP400 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.