E1 Spread Spectrum Radios Figure 8-45: Sort by Date Alarm record sorted by date: In Search Way, tick By Date, select From and To, press Search. Figure 8-46: Sort by Station Press Select All to select all the records. Press the Save to save the files. The following Save As window will appear. Select the desired folder and file name. Press Save. The file will be saved as *.txt or *.xls. You may use any word processor or Microsoft Office Excel to open the file.
E1 Spread Spectrum Radios Figure 8-47: Select All Alarm Records Single Deletion: Select the record you need to delete. Press Delete. Overall Deletion: Press the Select All button and press Delete. 8.8.2 Event Record In the Main Window, select System Record Æ Event Record. Another initialization window will appear. For system administrator’s easy management, Event Record records all the setting changes that had taken place.
E1 Spread Spectrum Radios Figure 8-49 Event Record (2) Save as…: buttons allows users to save single or all events as Excel files. 8.8.3 Login Record In the Main Window, select System Record Æ Login Record. Another initialization window will appear. Figure 8-50: Login Record Select the record you need to delete. Press Delete.
E1 Spread Spectrum Radios Figure 8-51: Deleting Login Record 8.8.4 Report Export In the Main Window, select System Record Æ Record Export. Another initialization window will appear. Figure 8-52: Report Export (1) Report From/To: Enter the date for reports.
E1 Spread Spectrum Radios Report. System Report reports the system setting. Alarm Report reports all the alarms. IDU Report reports the IDU’s setting and alarm. ODU Report reports the ODU’s setting and alarm. Link Report reports all the links, the setting and alarm. System Report and Alarm Report- can tick IDUΕODUΕLink as the source. IDU ReportΕODU Report and Link Report – can tick SystemΕAlarm as the source. Show Report: The reports are shown in the desired format from the date selected.
E1 Spread Spectrum Radios 8.9 Help Figure 8-54: Help 8.9.1 Help Check all functions and explanations. Figure 8-55: Function Explanations 8.9.2 About Arbeit Check Arbeit version.
E1 Spread Spectrum Radios Figure 8-56 About Arbeit 8.10 Monitor 8.10.1 Network Monitor In the Main Window, select Monitor Æ Network Monitor.
E1 Spread Spectrum Radios Figure 8-58: Network Monitor (2) Network Monitor monitors all the station’s information in the same link e.g. Station NameΕEquipment No.ΕModelΕ Far End Equipment etc. The following diagram shows the network links framework. It will display all information of equipments in the same link. SN: IDU’s serial number. Address: Link ID address. Temperature: IDU’s temperature. Power: IDU’s receiving power. E.O.W: service telephone number. AUX1: AUX1 protocol. AUX2: AUX2 mythology.
E1 Spread Spectrum Radios Figure 8-59: Network Monitor Links In the above Network Monitor window, click on Equipment Status.
E1 Spread Spectrum Radios Figure 8-60: Equipment Status Green = normal; Red = alarm; Grey = lost; Orange = test Table 8-3: Equipment Status Unit Status Description IDU AMP_M Amplitude Modulation alarm Dem De/modulation cannot detect the pulse EOW Abnormal service signal Mux / Demux De/modulation alarm PLL_MOD PLL lock failure ODU M & C ODU control panel signal loss ODU ODU Power Far End Input Traffic PLL-TX RF TX local oscillator lock malfunction PLL-RX RF RX local oscillator lock ma
E1 Spread Spectrum Radios Figure 8-61: ODU Status Sn: ODU’s serial number. RF Channel: working frequency channel. Transmit Frequency: transmitting frequency channel. Temperature: ODU’s temperature. Transmit Signal Level: transmitting signal power level. Receive Frequency: receiving frequency channel. ODU temperature alarm threshold(centigrade) Under Information windows Æ Link tab: Figure 8-62: Link Status Remote Equipment: remote station name. Link ID: link identification.
E1 Spread Spectrum Radios Figure 8-63 User I/O Status Input #n: input port status. Relays Output #n: output port status. Under Information windows Æ Cross Connect tab: Figure 8-64 Cross Connect Status Out Connector n – Tributary n: cross connection status.
E1 Spread Spectrum Radios Figure 8-65 Interval Status Press the Info tab under Interval Status.
E1 Spread Spectrum Radios Figure 8-67 Other Information BBU Software Ver.: Base Band Unit software version. BBU Product No.: Base Band Unit product number. TIU Software Ver.: Traffic Interface Unit software version. TIU Product No.: Traffic Interface Unit product number. 8.10.2 Real-time Alarm In the Main Window, select Monitor Æ Real-time Alarm.
E1 Spread Spectrum Radios Figure 8-68: Real-time Alarm (1) Until and unless the problem is removed or if the whole system is switched off, the real-time alarm will still be displayed on the window. Figure 8-69: Real-time Alarm (2) Pause: To put a pause to all the alarm status without changing, press Pause. Figure 8-70: No Real-time Alarm 8.10.3 Dial-up In the remote station, connect the modem to the phone PSTN line. The modem must be also connected to IDU’s NMS2. In the local station, login Arbeit.
E1 Spread Spectrum Radios Figure 8-71 DialUp (1) Login DialUp with present account “dialup” and password “dialup”. The following Dial-up windows will appear. Enter phone number of remote phone. Press Connect. The status appears as shown “CONNECT 24000/V44”. This means successful connection. Now you may monitor the remote equipment’s status. ϡNote: This function allows monitoring the status. It does not allow any edit/modify changes.
E1 Spread Spectrum Radios Figure 8-73 DialUp (3) 8-48
E1 Spread Spectrum Radios 9 Appendices 9.1 Specifications Table 9-1 Transmitter& Receiver Operation Frequency 2400~2483.5/5725~5850MHz Communication Mode Frequency Division Duplex, FDD Modulation QPSK TX Output Power < 22dBm RX Dynamic Range -84dBm ~ -15dBm Sensitivity (10-3 BER) Sensitivity (10-6 BER) Frequency Selection 2.4GHz 5.
E1 Spread Spectrum Radios or RJ-48, 120 ohm Signal BER LCD Display on IDU Table 9-3 IDU Structure IDU LCD Display of IDU, ODU, Remote, Alarm, Test Item Information Alarm LED Indication Buzzer, LED Indication, LCD Display FINE IDU Status ALM Alarm Condition TEST Test Condition RMT Remote Status Table 9-4 Temperature and Environment Operating Temperature Range IDU:-5 to 55 к ODU:-30 to 60 к Humidity IDU:10%~95% Non-condensing ODU:0%~100% Altitude 5,000 meters (maximum) Table 9-5 Network Ma
E1 Spread Spectrum Radios Monitoring Signal Stability 50ppm Power -4dBm±2dBm Return Loss VSWRЉ1.3 Frequency 11.0592MHz Stability 50ppm Power 150~180mVpp Return Loss VSWR Љ 1.
E1 Spread Spectrum Radios User Output Type Relay output Interface DB-26(Female) Number 4 Max. switching voltage 125VAC / 60VDC Max.
E1 Spread Spectrum Radios 9.
E1 Spread Spectrum Radios 9.3 LCD Function Table 9-10 LCD Function Status IDU Info (A) LCD Display Function 1 Local ID: n Display the local address 2 EOW No.
E1 Spread Spectrum Radios Perform loopback test from IF interface for 6 IF-Loop: En/Dis Set IF Loopback the convenience of testing the IDU’s stability Perform loopback test from RF interface for 7 RF-Loop: En/Dis Set RF Loopback the convenience of testing the IDU’s stability Remote 8 Close-Test: Y/N Close all test 1 Remote ID: n Display the remote address 2 R-Status: OK/Loss Info (D) 3 Far-end OK/Loss 4 1 2 Config Info(E) R-AUX2: ASY-CH/SYN-CH MODEM: On/Off SYS-Conf: 1+ 0 Y: close N: canc
E1 Spread Spectrum Radios 9.4 Spread Spectrum List Table 9-11 2.4GHz Spread Spectrum List (2E1, Side A) 2E1 Channel TX RX Left Middle Right Left Middle Right 1 2461.5 2465 2468.5 2399.5 2403 2406.5 2 2466.5 2470 2473.5 2404.5 2408 2411.5 3 2471.5 2475 2478.5 2409.5 2413 2416.5 4 2476.5 2480 2483.5 2414.5 2418 2421.5 (Frequency Unit: MHz / QPSK) Table 9-12 2.4GHz Spread Spectrum List (2E1, Side B) 2E1 Channel TX RX Left Middle Right Left Middle Right 1 2399.
E1 Spread Spectrum Radios Left Middle Right Left Middle Right 1 2398 2405 2412 2461 2468 2475 2 2408 2415 2422 2471 2478 2485 (Frequency Unit: MHz / QPSK) Table 9-15 2.4GHz Spread Spectrum List (8E1, Side A) 8E1 Channel 1 TX RX Left Middle Right Left Middle Right 2460 2474 2488 2396 2410 2424 (Frequency Unit: MHz / QPSK) Table 9-16 2.
E1 Spread Spectrum Radios Table 9-18 5.8GHz Spread Spectrum List (2E1, Side B) 2E1 Channel TX RX Left Middle Right Left Middle Right 1 5730.25 5732 5733.75 5814.25 5816 5817.75 2 5734.25 5736 5737.75 5818.25 5820 5821.75 3 5738.25 5740 5741.75 5822.25 5824 5825.75 4 5742.25 5744 5745.75 5826.25 5828 5829.75 5 5746.25 5748 5749.75 5830.25 5832 5833.75 6 5750.25 5752 5753.75 5834.25 5836 5837.75 7 5754.25 5756 5757.75 5838.25 5840 5841.75 8 5758.
E1 Spread Spectrum Radios Table 9-21 5.8GHz Spread Spectrum List (8E1, Side A) 8E1 Channel TX RX Left Middle Right Left Middle Right 1 5815 5822 5829 5731 5738 5745 2 5831 5838 5845 5747 5754 5761 (Frequency Unit: MHz / QPSK) Table 9-22 5.8GHz Spread Spectrum List (8E1, Side B) 8E1 Channel TX RX Left Middle Right Left Middle Right 1 5731 5738 5745 5815 5822 5829 2 5747 5754 5761 5831 5838 5845 (Frequency Unit: MHz / QPSK) Table 9-23 5.
E1 Spread Spectrum Radios 9.5 ODU IF & RF Status 9.5.1 2.4GHz Status IF 310MHz Monitor 11.0592MHz Tx: 2.463~2.483GHz -48V/ 0.5A Rx: 2.40~2.42GHz IF 70M ODU Side A: RF Unit Figure 9-1 Side A IF & RF Status IF 310MHz Tx: 2.40~2.42GHz Monitor 11.0592MHz -48V/ 0.5A Rx: 2.463~2.
E1 Spread Spectrum Radios 9.5.2 5.8GHz Status IF 310MHz Monitor 11.0592MHz Tx: 5.814~5.846GHz -48V/ 0.5A Rx: 5.730~5762GHz IF 70M ODU Side A: RF Unit Figure 9-3 Side A IF & RF Status IF 310MHz Monitor 11.0592MHz Tx: 5.730~5.762GHz -48V/ 0.5A Rx: 5.814~5.
E1 Spread Spectrum Radios 9.6 The Definition of Pins Table 9-25 DB9 female pins of NMS1 DB-9 1 2 3 4 5 6 7 8 9 Description Transmitted data ΰOUTPUTα Received data (INPUT) GND Request to send (INPUT) NC Table 9-26 DB9 male pins of NMS2 DB-9 1 2 3 4 5 6 7 8 9 Description Received Line Signal Detector (INPUT) Receive data (INPUT) Transmit data (OUTPUT) GND DCE Ready (INPUT) NC Table 9-27 DB9 female pins of AUX1 (V.
E1 Spread Spectrum Radios DB-9 1 2 3 4 5 6 7 8 9 Description NC TXD- (OUTPUT) RXD+ (INPUT) GND TXD+ (OUTPUT) RXD- (INPUT) Table 9-29 DB26 pins of USER I/O DB-26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Description Input 3 GND Input 4 Output 1C Output 1NC Output 1NO Output 3C Output 3NC Output 3NO Input 2 Input 5K Input 5A Input 6K Input 6A Input 7K Input 7A Input 8K Input 8A GND Input 1 Output 4NO Output 4NC Output 4C Output 2NO Output 2NC Output 2C Table 9-30 DB25 pins of A
E1 Spread Spectrum Radios 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 TX+ ΰOUTPUTαtransmit data+ RX+ (INPUT) receive data+ GND RC- (OUTPUT) receive clock- TC- (OUTPUT) transmit clock- TX- (OUTPUT) transmit dataTC+ (OUTPUT) transmit clock RX- (INPUT) receive dataRC+ (OUTPUT) receive clock+ 9-16
E1 Spread Spectrum Radios 9.7 Installation Guide 9.7.
E1 Spread Spectrum Radios 9.7.
E1 Spread Spectrum Radios 9.7.
E1 Spread Spectrum Radios 9.7.4 Antenna Installation Prerequisite: We have passed FCC certification of our system with following antennas. We strongly suggest that you should use the same antenna to avoid unexpected problems occurred in the operation. Model Number. KBNT5822-16 KBNT5828-25 Frequency 5725~5875MHz 5725~5875MHz Gain(dBi) 22 28.5 Type Panel Solid Dish Polarization Horizontal, vertical Horizontal, vertical 6 6 Beamwidth Hor. 6 6 VSWR Ver. Љ1.4 Љ1.
E1 Spread Spectrum Radios 9.8 RSL and Link Budget The received signal level (RSL) can be estimated using the following formula: RSL (dBm) = Pout – FL1 + G1 + G2 – FL2 – LP where: Pout is the transmitter output power (in dBm) FL1 is the feeder loss of the transmit side (in dBm) G1 is the gain of the transmit antenna (in dB) G2 is the gain of the receive antenna (in dB) FL2 is the feeder loss of the receive side (in dB) LP is the Path loss, defined by: LP (dB) = 96.