WG500B 1080P USER MANUAL 1
Congratulations on your purchase of this high quality night vision device. Use this device to view your surroundings in low light conditions or even in complete darkness with the built-in infrared light. You can even take pictures and video using the device which can be stored on a TF card. This device can also be used to take photos and video during the day. Use the supplied A/V cable to view your images on a television or download the images to your computer using the supplied USB cable.
Parts overview: 1. Ocular 2. Power button 3. IR button 4. Zoom button 5. Mode button 6. Snap button 7. USB port 8. TF card slot 9. TV out 10. Battery cover 11. Objective lens focus 12. Objective lens 13. Infrared filter 14. IR illuminator 15. Infrared zoom 16.
Battery Installation Open battery compartment and install the 8XAA batteries being sure to follow the polarity markings inside the battery compartment. Close the battery cover. Inserting / Removing the TF card Insert the TF card into the TF card port and push until it locks in place. To remove the installed TF card, please push the TF card inward to release it.
Focusing the image Target the object you would like to view and turn the focusing ring located just below the objective lens until the image on the screen is sharp and clear. Key functions 【MODE】 【SNAP】 【ZOOM】 【IR】 Toggles between Video / Photo / Playback / Menu In video mode: Press to take video. To stop recording, press this button again. In photo capture mode: Press to take photo. In playback mode: Press to Play or delete the video. In Menu mode: Press to select. In video mode: Press to zoom out.
1 Icon displaying that you are in Photo Mode 2 Brightness of IR from 1 to 5 (while plugging in USB power supply the IR brightness from 1 to 7) 3 Remain capacity quantity 4 Digital zoom 5 Battery power 6 Backlight from 1 to 15 Your screen display in video mode 1 Icon displaying that you are in Video Mode 2 Brightness of IR from 1 to 5(while plugging in USB power supply the IR brightness from 1 to 7) 3 Remaining time of recording 4 Digital zoom 5 Battery power 6 Backlight from 0 to 15
Your screen display during menu mode Format SD Select to format the TF card Power off mode :The NV can be set to automatically shut down when not operating after the selected period of time.
Date ZOOM: UP IR: DOWN ZOOM: UP IR:DOWN SNAP: OK Time SNAP:OK Flicker The video output mode can be set to NTSC (North America) or PAL (Europe) TV Standard 8
Language LCD Backlight Can set the backlight from 0 to 15 Date/Time Tag When you choose on, the date/time will be showed in the picture or video.
WG500B Specification Using the zoom function This device features a zoom function that can be used while taking a video or photo. Press the [ZOOM] button to toggle between 1x and 3x digital zoom. Using IR light in complete darkness This device can be used in complete darkness when using the built in IR (infrared) light. Press the [IR] button to activate the infrared light.
ID Catalog Function Description 1 Magnification (3.6-10.8) X31 2 Digital Zoom Max 3x 3 Angle Of View 9.2° 4 Objective Aperture 31mm 5 6 Optiacal performance Exit Pupil Distance 30mm F# for Objective lens 1.3 7 IR ZOOM 2X 8 5m~∞ in daytime; Viewing in the darkness up to 300M (monochrome) 9 640x360 resolution TFT LCD 10 11 Video Output 14 CVBS always output with VGA resolution High-sensitivity CMOS Sensor 12 13 OSD menu display Imager Size 1/2.
27 28 Power 8 pcs AA battery 8-12 V Battery life: 10 hours working time with IR off 29 Low battery warning 30 4 modes (Capture, Video, Playback Menu) 31 Single frame Image Capture 32 Video image Record 33 Playback image 34 Delete image 35 7 level IR switch 36 SD card format 37 System Power save (Off/1 min/ 3min/5 min) Language: English / Français / Español / Deutsch / Italiano/繁體中文 / 简体 中文 /日本語/Português/Русский 38 39 System Rest 40 Light Freq.
Warranty card Product model: Order ID: Date of purchase: Warranty period: User Name: User’s phone: User Email : User address: Warranty records: Warranty This product is warranted against defects in materials and workmanship for a period if one year from the date of purchase.