DVD VIDEO PLAYER XV-M565BK/XV-M567GD INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
Warnings, Cautions and Others Caution--_/I CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. IMPORTANT button! Disconnect the mains plug to shut the power off completely. The C)/I button in any position do not disconnect the mains line.The power can be remote controlled.
Introduction Table of contents Page 1 Features ............................................................................. Supplied accessories ........................................................ About this instruction manual ........................................ Notes on handling ............................................................ 1 1 2 3 Page 4 Front panel .............................................................................. Remote control unit .............................
Features Supplied • Audio/video Strobe accessories cable (x 1) function The unit can display nine continuous still pictures on the TV screen. Digest function You can select the desired title from the opening scenes displayed on the TV screen. • S_video cable (x 1) Angle function* You can select a desired angle from multiple camera angles recorded on the DVD VIDEO disc. • Zoom function You can view scenes close-up.
Introduction About this instruction This instruction manual basically explains manual operations as follows: F -You can play titles or tracks on discs inserted random order by using the Random function. These symbols indicate the types discs which the in operation used for. Press PLAY MODE- CANCEL. The play mode menu appears on the TV screen. The number indicates the procedural step. (_[J[RSe CURSOR
Introduction Notes on handling Important Installation Safety precautions cautions of the unit Avoid moisture, water • Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C, 41°F and 95°F). • Leave sufficient distance between the unit and the TV. • Do not use the player in a place subject to vibrations. Power cord • Do not handle the power cord with wet hands[ • A small amount of power (2.7 W) is always consumed while the power cord is connected to the wall outlet.
Names of parts and controls Refer to the corresponding pages indicated in () for details. _1__11 button 4_ DVD 1 to DVD 3 trays STANDBY indicator (5__ (OPEN/CLOSE) buttons _G_1 through 3 (DISC) buttons with indicators =_3Key control buttons (_, _, _) _>SHUTTLE knob \ / / pn_ @ _'"l ........ = ......
Preliminary knowledge _ Infrared signal-emitting CHOICE _1_DISC 1 - CHOICE, DISC DISC 3 buttons SUBTITLE DiSC 2 DISC 3 AUDIO ANGLE DISPLAY _2_SUBTITLE - DI( _3_AUDIO - STROBE ® TV1 TV2 TV3 TV4 TV5 TV6 TV7 TV8 TV9 TV ./-- TV 0 TV ch button pLAy MODE RETURN _ P<_ (B.SKIP) - B.
Preliminary _ DISC 1 - CHOICE, DISC 2 and DISC 3 buttons (18) Used to start playback of a disc in the corresponding tray (DVD1 through DVD3), as same as the 1 through 3 buttons on the front panel. In addition, pressing the DISC 1 button while holding the SHIFT button brings up the Preference on=screen display on the TV screen. _2_SUBTITLE - DIGEST button @ Infrared signal-emitting window Point this window toward the remote panel when pressing buttons.
Preliminary knowledge _ Disc indicator (57 Function indicator _1_Disc number indicator Shows the disc number being selected. _2_Title/chapter/track/key indicator Usually displays the title/chapter, or track number. When you shift the musical key, the status is displayed. For example, if you lower the key two levels, the display shows -_2, _r _3_Time display Shows the cumulative or the total disc time.
Preliminary knowledge Operational Principles The unit provides several on-screen displays. With some displays, you can set or select preferences or functions, while the others are display-only. Opening displays Opening display The Opening display appears automatically in some conditions. At the bottom, the following information are indicated depending on the unit's status. NOW READING: The unit is now reading the disc information (TOC).
Preliminary knowledge Play mode displays Pressing the PLAY MODE button brings up the play mode display in which you can control playback functions. Different displays appear depending and the unit's status. While stopped E ,_T During DVD VIDEOplayback _._ ,_o_ ] DuringAudioCDplayback E......... Status I DuringSVCD/Video CDplayback I................. I displays Pressing the DISPLAY-TIME button during playback brings up the status display.
Preliminary knowledge A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu, is displayed for over 5 minutes. • • Pressing any button on the unit orthe remote control unit will release the screen saver function and return to the previous display. You can select one of several screen saver modes available (see page 45).
Preliminary knowledge About discs Playable and non*playable Playable disc types are as follows: discs DVD VIDEO Video CD VIDEO CD VIDEO The SVCD DVD VIDEO Logo Audio CD OIGITAL AUOIO is a trademark, • DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. The unit can playback only DVD VIDEO discs whose Region code numbers include the unit's Region code, which is indicated on the region code symbol on the rear panel.
Connections *In the following description, "TV" may be substituted with "monitor" or "projector." *Before using the unit, you have to connect the unit to a TV and/or amplifier. • Do not connect the AC power cord until all other connections have been made. • Since different components often have different terminal names, carefully read the instructions component you are going to connect. You can enjoy using the unit by simply connecting it to a TV. To improve outputs to your separate audio equipment.
Getting started You can enjoy high picture quality by connecting VIDEO iN jacks of your TV with the video cables. f Gree___u _Red e the unit's COMPONENT VIDEO OUT jacks to the COMPONENT Component video cable (not supplied) .-_- S-video cable (supplied) Blue t" Green _ I Bed TV IH Red White VIDEO IN LEFT _udio '° cable (not supplied) • Connect "Y" to "Y," "PB" to "PB," "PR" to "PR" correctly.
Getting started You can enhance the sound quality by connecting the unit's DIGITAL OUT to the digital input of an amplifier, DAT or MD by using an optional digital cable. The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital, DTS or MPEG Multichannel decoder or an amplifier with a builtqn decoder by using an optional digital cable, you can enjoy high-quality surround sound.
Getting started Using the remote control unit Using the remote control, you can operate not only all the functions and the volume control of a JVC amplifier/receiver. The battery 1 compartment is located Press down the point shown pull it up to open the cover. on the back of the remote by the arrow control of the unit but also basic functions of your TV unit. at the top of the compartment cover, and 2 Placethe two accessoryR6P(SUM-3)/AA(15F)batteries in the remote control according batteries.
Getting You can operate your TV from the remote control Setting the remote control signal for operating unit. your TV. Holding down TV/VIDEO - THEATER POSITION, enter the manufacturer code of your TV listed below numeric buttons (O - 9). Do not release TV/VIDEO - THEATER POSITION. Keep holding it until the next step is completed. Manufacturer code by using the list No Manufacturer No.
In the following description, the buttons on the remote control unit are mainly corresponding buttons on the front panel of the unit if available. used, however, you may use the Turning on/off the unit Press _11 on the front panel or press DVD (])/I - TV _/I on the remote control unit. DVD (bll TV (b/I G3C_3 = o°::: • You can turn on the unit by pressing the PLAY button or any one of the DISC (1 through 3) buttons.
Basic operations Basic playback Now you can play a disc. First, let's enjoy simple playback according to following procedure. Press PLAY, or press one of the DISC(1 through 3) buttons.
Basic operations • During playback From the remote control unit Hold down I<< or _,_L Holding down _bl advances playback rapidly, while holding clown _ speed. Releasing the button returns the unit to normal playback. reverses playback at 5 times the normal or Press1<4 or _l while holding down SHIFT. Each press of 1<41or _ normal speed. Pressing PLAY returns while holding down the SHIFT button the unit to normal increases the playback speed from 2x to 6Ox the playback.
Basic operations Resuming playback The unit can memorize the position next time you press PLAY. 1 on a disc where you interrupt playback, and resume playback from that position Set the RESUMEsetting on the SYSTEMpageof the preferencedisplay to ON. (See page 46 for details about how to set.) 2 At the position you want to interrupt playback,press STOP,or press DVD VII - TV (b/I on the remote control or _/I on the front panel.
When you use the functions described below while stopped, make sure that the desired disc number is selected (the selected disc number is shown in the display window). If it is not selected, press the corresponding DISC button to start playback and then press STOP. • When (_appearsontheTVscreenbypressingTITLEin step 1: The disc does not have a menu listing the titles.
Advanced operations When "NEXT" or "PREVIOUS" appears on the TV screen, the unit generally works as follows: • Pressing _ advances • During DVD VIDEO playback, if a menu is shown on the TV screen,the numeric buttons may be used for selecting an item in the menu. to the next page. • Pressing _ returns to the previous page. * The method of the operation is different depending on the disc. • When (_ appears on the TV screen. The title or track you have specified is not contained in the disc.
Advanced operations • You can also locate a desired chapter directly by specifyingthe chapter number usingthe numeric buttons during playback (except a menu is shown), See page 22, [] • When the chapter number is incorrect in step 3: Overwrite the incorrect number with the correct number. If the current title of a DVD VIDEO disc being played is divided into chapters, you can skip to a desired chapter by specifying the chapter number using the omscreen display.
Advanced 4 operations Press ENTER. The unit starts playback from the specified for DVD VIDEO) for Audio [............ Selected time. CD) [][][] .1 The unit can display the opening scene of each title or chapter on a DVD VIDEO or each track of a Video CD/ SVOD. You can select a desired scene from those displayed on the TV screen. time Selected time for Video CD/SVCD) • "10" and "+10" buttons are not used in this function.
Advanced operations Special picture playback The unit provides special including Frame-by-frame, Zoom. Selected picture playback functions Strobe, Slow-motion and scene [][][] • When the lower right scene is selected, pressing CURSOR I_ advances to the next page if available. Similarly, when the upper left scene is selected, pressing CURSOR _1 returns to the previous page (if available).
Advanced operations • To cancel strobe play Press AUDIO - STROBE while holding down SHIFT. I NOTES } • Pressing end holding PAUSE for more than 1 second also I I I o _ctivates the Strobe function. • If you press AUDIO - STROBE while holding down SHIFT during playback, nine still pictures also appear but they L @@@ 1- advance in realtime. [][][] • During --2 playback From the remote control unit @@@ 1_ooooo • During playback or while paused 1 PressANGLE- ZOOMwhile holding down SHIFT.
Advanced operations Changing the playback order .... You can play titles or tracks on discs inserted desired order or in random order. 1 in the 1! z 3 The programmed disc number and title/track number are shown under each program number, • When you specify a Press PLAY MODE * the SHIFT (or press The last selection is You can play titles or tracks on discs inserted desired order by using the Program function. • To clear the program Press STOP. in the 4 PressPLAYto start program play.
Advanced operations Repeat playback You can play titles or tracks on discs inserted random order by using the Random function. You can repeat playback of the current selection or all discs inserted. You can also repeat playback of a desired part. in []E[][] • While stopped 1 PressPLAYMODE- CANCEL. The play mode menu appears 2 1'-- on the TV screen. UseCURSOR_/_ to move [_ to [RANDOM].
Advanced operations During Audio CD/Video _or Audio CD/SVCD playback for Video CD) [......... CD/SVCD) H Selected [][][][] ] _ge_ Selected repeat mode repeat mode 1 _- --2, 3 \_ _) (off) • To stop Press repeat playback STOP. • • While During playback stopped 1 PressPLAYMODE- CANCEL. The play 2 mode menu appears UseCURSOR
Advanced • To quit A-B repeat playback Press STOR The unit stops playback B repeat mode. and quits the A- • During playback, pressing ENTER when [_ is pointed B REPEAT] quits the A-B repeat mode and continues playback. • You can also quit the A-B repeat mode by pressing at [A- _ operations Selecting a scene angle of DVD VIDEO You can enjoy a variety of scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles.
Advanced operations Changing the language and sound For DVD VIDEO discs, you can select the subtitle language, as well as the audio language/sound included on a disc. For Video CD and SVCD discs, you can select the audio channel(s). --1 • During i • During 1 playback -- DVD VIDEO playback Pressand hold ANGLE- ZOOMfor more than 1 second. Up to nine camera angles recorded on a disc appear on the TM screen. ,_ 1 2 Use CURSORA/v/
Advanced • For SVCD operations (Video CD) Pressing CURSOR
Advanced operations Selecting character the picture Enjoying virtual surround sound You can select the quality of the image from among four options (OFF, 1, 2 and 3) according to the type of programming, picture tone or personal preferences. Using the 3D Phonic function, you can get a simulated surround effect from your stereo system. [][]E[] @@@ @@@ @@@ 2 --°1,2 • • During During 1 playback PressTV/VIDEO- THEATERPOSITIONwhile holding down SHIFT. The theater screen.
Advanced operations • THEATER: You can enjoy sound effects like in a major theater Hollywood. in * When you play a DVD VIDEO disc recorded in Dolby Digital which contains more than 3 channels, ACTION does not appear. Checking the status You can check the disc/time DVD functions, of the disc. information, []EE[] • The 3D Phonic display will automatically disappear if you do not change the 3D phonic for 5 seconds. • Toturnoffthe3Dphonicdisplaymanually, pressENTER.
Advanced operations 2 To changethe time display mode (only for Audio CD or Video CD/SVCDwithout PBC), press DISPLAY- TIME while holding down SHIFT. The time display (for Audio • During DVD VIDEO playback mode cycles as below. CD) EACH track elapsed (current O@@ time) Q@@ EACH (current REMAIN track remaining time) TOTAL (disc elapsed time) TOTAL REMAIN (disc remaining time) (for Video CD/SVCD without PBC) EACH 1 (current track remaining Press DISPLAY-TIME The DVD function TV screen.
Preparation (From the remote control unit) ................. 1 3_ 1 Connectmicrophone(s) to the MIC 1/2 jack(s) on the front panel. --(NOTES ) • While an Audio CD disc is selected (not only during playback but also while stopped), the input signals from the MIC 1/2 jacks are not output from the DIGITAL OUT jack. .Jvc • To adjust the microphone volume, use MIC 1/2 LEVEL. Turning it clockwise raises the level, counter-clockwise lowers the levels.
KARAOKE operation 2 Specifythe disc by a DISC(1-3) button and then the title or track by the numeric buttons. Reserving songs You can reserve up to 12 songs to play in the desired order. Of course, it is possible to enjoy karaoke without reserving songs. q 43._ 1 [][][][] (From the remote control l.z 2 1.7 2.4 3 4 5 6 b/ d Example: To reserve track 13 of the disc loaded in tray 2: Press DiSC 2 -_ +10 -_ 3. unit) The specified song is reserved and the _7 moves to the next position.
KARAOKE (For SVCD) Selecting audio AUDIO A Most Karaoke discs have the capability "Guide vocal" or "Guide accompaniment. operation melody" of adding a to the Karaoke Total number of audio tracks Selected sound or channel ,l_o NOTE_S ) turn off the Karaoke menu With most DVD or SVCD Karaoke discs, you can choose audio track(s) some options such as "with guide vocal," "with guide melody" and "accompaniment only." You can choose "AUDIO" only for DVD and SVCD discs. I ress DISPLAY=TIME.
KARAOKE 3 operation Use CURSORA/v to select the desired sound to be played back. Example 1: A multi_sound Karaoke DVD Pressing CURSOR • button cycles the sound as follows. Pressing CURSOR • cycles the sound in reverse order. 1 With guide vocal (1) 2 With guide vocal (2) 1+2 With guide vocal (1+2) PRO Only accompaniment OFF With guide melody "2" and "1+2" above appear for vocal duet.
KARAOKE 3 • To turn off the Karaoke menu operation UseCURSORA/v to select [REPLACE]. Pressing CURSOR • cycles the mode as shown below. Press DISPLAY-T_ME, • If [KARAOKE SOUND] is set to L or R, the vocal mask function does not work correctly. Pressing CURSOR • cycles the mode in reverse order. • With some materials, such asthose recordedin monaural and sung by multiple voices, the voice may not be satisfactorily masked.
KARAOKE operation Adding an effect to your voice You can add various effects to your voice using the Echo and Vocal Effect functions. 3 --2 3 • When the KARAOKE function --2 JVC I Press DISPLAY-TIME. The Karaoke menu appears • When the KARAOKE function I is active 2 UseCURSOR
KARAOKE operation Shifting the musical key You can shift the musical disc to fit to your voice. t key of a song recorded on a 3 .twl= @ @ --2 W=_J • When the KARAOKE function 1 is active • Usethe Keycontrol buttons (#, _ and b) to shift the musical key. • Pressing # raises the key. • Pressing b drops the key. • Pressing Lq returns to the original When the KARAOKE function I Press DISPLAY-TIME. The Karaoke 2 key. is active menu appears on the TV screen.
3 Selecting preferences You can set various dedicated displays. preferences for playback via four PressCURSOR
initial settings SUBTITLE You can select the default displayed if it is contained subtitle language on the disc. to be DIGITAL I Pr_ESS ENGLISH -* SPANISH -* FRENCH I-* CHINESE -* GERMAN I"+ ITALIAN I-* JAPANESE I-* language code from AA to ZU (See "Table of languages and their abbreviations" the end of this manual.) • PCM ONLY: When you connect the DIGITAL OUT jack of the unit to the linear PCM digital input of other audio equipment.
Initial settings DOWN MIX To playback a DVD VIDEO disc recorded with _GrcAL AUtO C4J1PUT surround multichannel audio correctly, the DOWN MIX setting must be properly made I PF-ESS"11' _Y according to your audio system. Note that this setting affects the output signal from the AUDIO (both DIGITAL and ANALOG) output jacks when playing back a DVD VIDEO disc recorded with surround multichannel audio.
Initial settings ON SCREEN GUIDE The unit can display "onscreen guide" icons or characters on the picture, which show what is happening to the disc or the unit. AUTO °_ SCRESN GU_ SC_N St'V_R _I • ON STANDBY When the unit is stopped for more than 30 minutes or 60 minutes, the unit enters standby mode automatically. AUD_ RESt_ AVCe_PUU_ _ AUTO STA_I)'BY The on-screen guide will be displayed. • OFF The on-screen Examples guide will not be displayed.
Initial settings 4 While _ points [Set Level], use CURSOR _/_ to select the parental lock level. Limiting playback by children F BD This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced with other scenes.
Initial settings Even if you want to change only the country code and/or parental level, do not forget to enter the password after changing the country code and/or parental level. Otherwise, the new country code and/or parental level will not become effective. [] Pressing ENTER again returns display. --2, 5 to the opening ,__ ove, @ moves to [EXIT] automatically and nter the wrong password more than 3 times • does not work. I "lye_ UJ, er et,your password instep 2: Enter "8888.
AV COMPU LINK remote control system When you buy a separate TV, VCR, DVD player, receiver, or other component and connect them to each other, you have to operate each component individually. JVC's AV COMPU LINK remote control system meets the demands of a system made up of single components and has the ease of operation of a single unit. Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals ,_, All_f'_d_DI B'IW of each component _II_IIF I I IILUf _ hE|V#l to one another.
Additional _L Notes information for connection If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions may not be performed automatically. • The AV COMPU LINK terminal on some televisions indicates "11." Do not connect the terminal indicating with the AV COMPU LINK terminal on a receiver. If connected, the system will not work correctly.
Additional information Care and handling of discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the player to malfunction. Label side Do not damage the label side, stick paper to or use any adhesive on its surface. Storage Make sure that discs are kept in their cases.
Additional information Troubleshooting What appears service. to be a malfunction Symptom Power Possible does not come Remote may not always control on. Power does not work. is displayed on the Please go through case plug securely. the unit. Replace are exhausted. polarity Connection incorrect. is incorrect. of video selection cable Connection is reproduced when playing back a DVD disc recorded with 96-kHz, linear PCM audio.
Additional information Specifications General Readable discs: Video format: DVD VIDEO, Audio CD, Video CD, SVCD NTSC color, PAL selectable Other Power requirements: Power consumption: Mass: Dimensions (W x H x D): Video AC 110 V - 240 V ,x,, 50 Hz/60 Hz 15 W (POWER ON), 2.7 W (STANDBY mode) 4.6 kg (10.2 Ibs) 435 mm x 126.5 mmx 324.
Appendix A: Table of languages and their abbreviations When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. select the desired language, select the abbreviation corresponding the language you want to.
Appendix B: Country code list for parental lock This list is used for the parental Lock operation. For details, see page 47.
LI LK LR LS LT LU LV LY MA MC MD MG MH ML MM MN MO MP Liechtenstein SriLanka Liberia Lesotho Lithuania Luxembourg Latvia LibyanArabJamahiriya Morocco Monaco Moldova,Republic of Madagascar MarshallIslands Mall Myanmar Mongolia Macau Northern Mariana Islands MQ Martinique MR Mauritania MS Montserrat MT Malta MU Mauritius MV Maldives MW Malawi MX Mexico MY Malaysia MZ Mozambique NA Namibia NC NewCaledonia NE Niger NF NorfolkIsland NG Nigeria NI Nicaragua NL Netherlands NO Norway NP Nepal NR Nauru NU Niue NZ N
JVC VICTOR COMPANY OF JAPAN, LIMITED 0700RIMUBNJEM