BEFORE OPERATION DV Capture Board Video Navigator CASTELLANO ENGLISHFRANÇAIS GV-DV1000 ENGLISH AVANT DE COMMENCER ANTES DE LA OPERACION PhotoSuite SE VideoWorks LYT0272-001A
JVC SOFTWARE LICENSE AGREEMENT EN IMPORTANT TO CUSTOMERS: MAKE SURE TO READ THIS CAREFULLY BEFORE OPENING THE SEALED SOFTWARE PACKETS Thank you for purchasing our product. In order to start using the software program enclosed, you are required to accept the terms and conditions of the agreement as provided below. Software License Agreement This is a legal agreement between you (either an individual or an entity) and Victor Company of Japan, Limited (JVC).
EN 5. LIMITED WARRANTY JVC warrants that any media in which the Program is embodied (e.g. floppy discs, CD-ROM, etc.) are free from any defects in materials and workmanship for a period of thirty (30) days from the date of your purchase and that any hardware accompanying the Program is also free from defects to the extent provided in the attached Warranty Form.
CONTENTS EN JVC SOFTWARE LICENSE AGREEMENT 2 TECHNICAL SUPPORT FOR REGISTERED USER 5 User Registration Method ......................................................... 5 NOTICE FOR USERS 7 INSTALLING DV CAPTURE BOARD 8 INSTALLING DV CAPTURE DRIVERS 10 For WINDOWS® 98 ............................................................... 10 For WINDOWS® 95 VERSION 4.00.950B or later ........................ 12 For WINDOWS® 95 VERSION 4.00.950 or 4.00.950A ..................
TECHNICAL SUPPORT FOR REGISTERED USER EN TECHNICAL SUPPORT FOR REGISTERED USER To enable the technical support of each company, perform the user registration according the 5 below table. User Registration Method Product Name Support company Registration Method Remarks Video Navigator JVC Not required. See JVC Software License Agreement. (p. 2) Adaptec DV Capture Board MGI Mail the MGI software user registration post card. See Adaptec Software License Agreement.
EN TECHNICAL SUPPORT FOR REGISTERED USER (cont.) JVC Support for: NewSoft Support for: Phone: North America(U.S.A) Technical Support Hotline: Please e-mail: tech@newsoftinc.com or call (510) 445-8616 www.newsoftinc.
NOTICE FOR USERS EN When contacting the technical support centers (p. 6) about this software, please fill out the following and have the appropriate information ready. Product Name of Software Version of Software Model CPU PC OS Memory MB Available Hard Disk Space MB Please note that it may take some time to respond to your questions, depending on their subject matter.
EN INSTALLING DV CAPTURE BOARD To install the DV Capture Board (AHA-8920 IEEE Host Adapter) in your computer so you can connect IEEE 1394 devices to your system, follow these steps: any static electricity build-up 1 Discharge before handing the DV Capture Board by touching a grounded metal object (like the exposed metal parts on the back of your computer). OFF the power of the computer and 2 Turn disconnect the power cord. the cover from the computer. 3 Remove (Refer to your computer’s manual.
EN the DV Capture Board from its 5 Remove antistatic packaging. Always handle the card by its edges. IEEE 1394 DV Capture Board insert the DV Capture Board 6 Carefully into the PCI expansion slot until it is firmly seated, then replace the slot cover screw. your computer cover. The 7 Replace driver program (IEEE 1394 software) for the DV Capture Board must be installed on your computer before you can use the JVC Video Navigator. Caution •Computers may have vertical or horizontal PCI expansion slots.
EN INSTALLING DV CAPTURE DRIVERS Caution • In case the DV Capture Board has been installed with Windows® 95, these steps are not required. FOR WINDOWS® 98 Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you have not done so already, install the DV Capture Board (see p. 8). Follow these steps to install the drivers. If you make a mistake during the install procedure, click the Back button and correct the mistake. on your computer.
EN Make sure only the CD-ROM drive is 4 selected. Then click the Next button. sure The updated driver 5 Make (Recommended) Adaptec AHA- 8920 Host Adapter is selected. Then click the Next button. 6 Click the Next button. 7 Click the Finish button. 8 Restart your computer.
EN INSTALLING DV CAPTURE DRIVERS (cont.) Before installing, confirm your Windows® 95 version. Double-click the system icon in the Control Panel and select General tab. FOR WINDOWS® 95 VERSION 4.00.950B OR LATER Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you have not done so already, install the DV Capture Board (See p. 8). Follow these steps to install the drivers: on your computer. Put the included 1 Turn JVC CD-ROM in your CD-ROM drive.
EN Insert Disk window is displayed. 4 The Click the OK button. you know the drive letter for your CD5 IfROM drive enter it in the box below Copy files from: and go to step 7. If you do not know the drive letter for your CD-ROM drive continue with the next step. the Open window click the arrow 6 Inbelow Drives: and select your CD-ROM drive. Click wn1394.inf in the file list. Then click the OK button. Copying Files... window click the 7 InOKthebutton. 8 Restart your computer.
EN INSTALLING DV CAPTURE DRIVERS (cont.) FOR WINDOWS® 95 VERSION 4.00.950 OR 4.00.950A Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you have not done so already, install the DV Capture Board (See p. 8). Follow these steps to install the drivers: on your computer. Put the included 1 Turn JVC CD-ROM in your CD-ROM drive. The New Hardware Found Window is displayed. The New Hardware Found Window is displayed.
EN the Open window click the arrow 4 Inbelow Drives: and select your CD-ROM drive. Click wn1394.inf in the file list. Then click the OK button. From Disk window click 5 InthetheOKInstall botton. the installation is complete we 6 After recommend you restart your computer.
EN CONNECTING AND TROUBLESHOOTING CONNECTING DV DEVICE Plug the included DV cable’s larger 1 connector into the socket on the DV Capture Board. • Confirm that the connector is securely plugged in. the DV cable’s smaller connector 2 Plug into the camcorder’s DV OUT/IN socket. • Confirm that the connector is securely plugged in. • Refer to your camcorders’s instruction book to locate the camcorder’s DV OUT/IN socket.
EN 17 TROUBLESHOOTING FOR DV CAPTURE BOARD If you are experiencing problems when using DV Capture Board, check the following items: • The DV Capture Drivers are not installed. • The PCI expansion slot must be a 5V bus master PCI expansion slot. Refer to your computer’s manual and seat the DV Capture Board in the PCI expansion slot firmly. FOR WINDOWS® 98 (P. 10~11) • If the drivers did not install properly then use the following procedure: 1. Double-click the System icon in the Control Panel. 2.
EN INSTALLING VIDEO NAVIGATOR DirectX About Windows® 95 basic operation, refer to the instructions of Windows® 95 or your computer. PREPARATION 1 Start Windows. 2 Close all open windows and toolbars. Close any icons shown on the task bar. 3 Confirm that programs are not displayed on the task bar. INSTALLING VIDEO NAVIGATOR the included CD-ROM into the 1 Insert CD-ROM drive. 2 Click Start menu and select Run. Browse button in the Run window. 3 Click In Browse window, select the Setup.
STARTING UP VIDEO NAVIGATOR EN 19 PREPARATION your video cassette to your DV 1 Insert device. the DV cable to your computer 2 Connect and your digital camcorder. (See the separate booklet of DV Video Navigator, p. 8) 3 Set your digital camcorder to Play mode. on your computer and start up 4 Turn Windows 95. ® 5 Click Start on the task bar. Select Program and VideoNavigator 1.0 6 Then and click VideoNavigator 1.0. Video Navigator will start up. MEMO • Close all open windows and toolbars.
EN INSTALLING PHOTOSUITE SE Using MGI PhotoSuite Starter Edition (SE), you can transform or enhance the pictures you take by altering colors, making collages, and more. Put your photos into posters, calendars and greeting cards. You’ll see your photos in a whole new light. Put your photos into a picture frame or a screen saver, or into a school science report, or wherever you’d like them to be.
INSTALLING VIDEOWORKS EN 21 Presto! VideoWorks enables you to manage and edit in detail on your computer screen video sequences as well as sounds (AVI files), or video/audio fragments captured from video devices such as a VCR, a laser disc player, a Camcorder, etc. You can combine several video sequences with significant order, create smooth transition effects, add various video effects, and render moving titles to compose a creation of art.
EN INSTALLING ACROBAT READER INSTALLING ACROBAT READER The VideoWorks Manual File is supplied as acrobat data file. In case it cannot be opened, you should install Adobe Acrobat Reader. the included CD-ROM into the 1 Insert CD-ROM drive. 2 Click Start menu and select Run. 3 Click Browse button in the Run window. In Browse window, select the CD-ROM 4 column, icon in Look in: Column. In the list double-click AcrobatReader folder and Setup icon. \AcrobatReader\Setup.
STARTING UP AND FINISHING EN 23 STARTING UP VIDEOWORKS 1 Click Start on the task bar. Select Program and Presto! VideoWorks 2 and click Presto! VideoWorks. Then VideoWorks will start up. MEMO • Close all open windows and toolbars. Close any icons shown on the task bar. • Turn off the function that starts up software automatically by time control. For example for screen saver, E-mail, communication software, viruses checker, scheduler and etc.
EN IMPORTING IMAGES INTO VIDEOWORKS VideoWorks makes an action file from images captured by Video Navigator. The action movie can be adjusted to smooth action by morph function.You can view the action file as like a movie because the snapshots related with time are connected continuously and displayed with frame-playback. PREPARATION • You should save image files as JPEG or Bitmap format when saving them with Video Navigator. • Start up VideoWorks. (See p.
EN 25 one of the image files in Open 5 Click window. 6 Click Open button. • The image files in same folder are imported and action movie is made with them. • Media Viewer window is displayed. • Processing time for importing depends on the settings of Import Options window. (See step 3.) the play button on the Media 7 Click Viewer window. MEMO • Video Album You can make video-album with images not continuing as travel snapshots. The images are switched at constant duration automatically as slide-show.
BEFORE OPERATION VICTOR COMPANY OF JAPAN, LIMITED COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD.