. STUDIO VIEWFINDER VF-HP900G . INSTRUCTIONS About INSTRUCTIONS Please view INSTRUCTIONS from the URL link below. North America: http://pro.jvc.com/prof/attributes/features.jsp?model_id=MDL102617 Europe: http://www.jvc.net China: http://www32.jvckenwood.com/jvc/manual_e/index.asp? Please read the following before getting started: Thank you for purchasing this product. Before operating this unit, please read the instructions carefully to ensure the best possible performance.
Safety Precautions FOR USA These are general Important Safety Instructions and certain items may not apply to all appliances. Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. . 13. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
POUR LES ÉTATS-UNIS Ces informations sont des CONSIGNES DE SÉCURITÉ IMPORTANTES et certains points peuvent ne pas s’appliquer à tous les appareils. CONSIGNES DE SÉCURITÉ IMPORTANTES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. . 13. Lire ces instructions. Conserver ces instructions. Tenir compte de tous les avertissements. Respecter toutes les instructions. Ne pas utiliser cet appareil à proximité de l’eau. Ne nettoyer qu’avec un chiffon sec. Ne pas boucher les ouvertures de ventilation.
POUR CANADA FOR USA AND CANADA CAUTION ATTENTION RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE D’ELECTROCUTION NE PAS OUVRIR CAUTION: ATTENTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. AUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTILISATEUR. SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME.
Déclaration de conformité du fournisseur VF-HP900G Numéro de modèle : Nom de marque : JVC JVCKENWOOD USA Personne Corporation responsable : 1440 Corporate Drive, Adresse : Irving, TX 75038 678-449-8879 Numéro de téléphone : Supplier's Declaration of Conformity Model Number: VF-HP900G JVC Trade Name: JVCKENWOOD USA Responsible Corporation party: 1440 Corporate Drive, Address: Irving, TX 75038 678-449-8879 Telephone Number: This device complies with Part 15 of the FCC Rules.
Attention: The mains plug shall remain readily operable. Remove the mains plug immediately if the product functions abnormally. La prise secteur doit être opérationnelle. Débranchez immédiatement la fiche secteur si le produit ne fonctionne pas normalement. . . CAUTION: WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. . . AVERTISSEMENT : POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE PAS EXPOSER L’APPAREIL A LA PLUIE NI A L’HUMIDITE.
. To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel. WARNING . Operation of this equipment in a residential environment could cause radio interference. CAUTION: . Where there are strong electromagnetic waves or magnetism, for example near a radio or TV transmitter, transformer, motor, etc., the picture and the sound may be disturbed. In such case, please keep the apparatus away from the sources of the disturbance. .
Precautions for Proper Use This unit is compatible with the GY-HC900 series. For information on other compatible models, please consult your dealer. Please also read the instruction manual of the camera to be connected before using. This is not a drip-proof product. Before making use of this product, fasten it securely using a fitting tool (commercially available bracket, studio kit or the supplied shoe mount). Location of Storage and Use 0 Do not place this product at the following locations.
Names of Parts Front . K A B C D EF G H I J A [PHONE] Terminal Outputs stereo audio. Memo : 0 When the [INPUT] button is set to “SDI” or “Camera”, audio configured in [Audio Ch] is output. B [A] (Standby) Button Switches the viewfinder to on or off (standby). 0 Green: Power on 0 Orange: Power off (standby) C [INPUT] Button For selecting an input.
Rear J I F [DC IN] Terminal (XLR type, 4-pin) Input terminal for DC 12 V power supply (max. DC 17 V). Memo : 0 If this unit is connected to a camera via a VF cable, there is no need to supply power from the [DC IN] terminal. H . . G A B C D E F A Power Switch 0 Ⅰ [DC IN]: Receives power supply from the [DC IN] terminal 0 ○ [OFF]: Switches off the power supply completely 0 Ⅱ [CAMERA]: Receives power supply from the VF cable B [SDI IN] Terminal Input terminal for 3G/HD/SD SDI signals.
Connecting the VF Cable 3 Plug the supplied VF cable firmly into the [VF CABLE] terminal To connect a VF cable, do so after turning off the power switch on the camera unit. Connect the [VF CABLE] terminal of the viewfinder to the [VF] terminal of the camera using the supplied VF cable. 1 Unfasten the 4 screws to remove the rear cover Rear Cover VF Cable [VF CABLE] Terminal . Screws .
Attaching the Protective Cover A protective cover can also be mounted if screen protection is needed. Attaching the Shoe Mount The supplied shoe mount can be mounted to the 1/4" screw hole located on the bottom surface of this unit. 1 Mount the protective cover with the 4 M2 screws supplied Protective Cover . . 1/4" Screw Hole Attaching the Number Plate Indicating a number on the number plate eases identification using the monitor number.
Before configuring the function settings, ensure that the terminals are correctly connected. Operating the Viewfinder Menus 1 Press the [VOL./MENU/SET] knob (button) Viewfinder menu is displayed. 2 Move the cursor to the item to configure and press the [VOL./MENU/SET] knob (button) 0 Pressing the button displays the item for configuration. 0 Turn the knob to move the cursor up or down. 0 If there is a menu at the lower hierarchical level, pressing the button moves to the menu at the next lower level.
Configuring Shortcuts (Function Button) The VF-HP900G allows each of the function buttons (F1 to F7) to be assigned with a shortcut function. Features that can be assigned to the F1 to F4 buttons are different from those assignable to the F5 to F7 buttons. Configuration Method 1 Press and hold down the function button to configure The function menu appears. 2 Turn the [VOL./MENU/SET] knob (button) to select a feature to assign to the button 3 Press the [VOL.
List of Viewfinder Menus Setting value with the R mark is the factory default. Picture Settings related to picture quality Item Brightness Contrast Chroma Phase Aperture Back Light RGB Range (HDMI only) Color Space Camera Log Description For adjusting the black level. For adjusting the contrast level of the bright areas in the image. For adjusting the color density. For setting the color phase. Corrects the frequency characteristics of luminance signals. For adjusting the brightness of the backlight.
Item Gamma HDR Color Temperature Description Setting Value For selecting a gamma correction Off, 1.8, 2.0, R2.2, 2.35, 2.4, 2.6, 2.8 value. (1.8: equivalent to γ1.8, 2.0: equivalent to γ2.0, 2.2: equivalent to γ2.2, 2.35: equivalent to γ2.35, 2.4: equivalent to γ2.4, 2.6: equivalent to γ2.6, 2.8: equivalent to γ2.8) For selecting a preset HDR. ROff, ST 2084 300, ST 2084 1000, ST 2084 10000, HLG For selecting a color temperature.
Function Settings related to video images Item Scan Aspect Description For selecting a scan mode. Setting Value RAspect, 1:1, Zoom Aspect: Enables the [Aspect] item. 1:1: Displays in the same resolution as the input signal (life size). The aspect ratio varies with the input signal. Zoom: Enables the [Zoom] item. When Zoom is selected, the [VOL./MENU/SET] knob (button) switches to the mode for adjusting the position. (A P10 [Names of Parts] ) For selecting an aspect ratio when Full, R16:9, 1.85:1, 2.
Audio Settings on audio signals Item Volume Level Meter Description For adjusting the volume. Displays or hides the level meter. 0 Ch1-Ch16 is forcibly displayed when [Waveform] is configured to “Multi”. 0 [Level Meter] only supports 1ch and 2ch during HDMI input. (The display will either be Ch1-Ch4 or Ch1-Ch16.) Audio Ch For selecting an audio channel (SDI, Camera) mode.
Troubleshooting Troubleshooting Power does not turn on No video image Check Ensure that the VF cable and power cable are plugged in securely. Turn on the power of the camera. Check the position of the power switch at the back of this unit. Ensure that the VF cable is plugged in securely. Turn on the power of the camera and configure correctly.
Accessories Accessories INSTRUCTIONS Warranty Card (for USA) *The Warranty Card is included in the INSTRUCTIONS. 使用说明书 (for CHINA) 保修卡 (for CHINA) *The 保修卡 is included in the 使用说明书. VF cable (0.8 m) Number plate Protective cover Protective cover mounting screws (M2) Shoe mount Quantity 1 1 1 1 1 3 1 4 1 Dimensional Outline Drawing (Unit: mm) 195 . 160.5 61 * The specifications and appearance of this product are subject to changes for further improvement without prior notice.
Available Signal Formats VF-HP900G Available Signal Format Signal Format 1080/60i 1080/59.94i 1080/50i 1080/60p 1080/59.94p 1080/50p 1080/30p 1080/29.97p 1080/25p 1080/24p 1080/23.97p 1080/30psf 1080/29.97psf 1080/25psf 1080/24psf 1080/23.97psf 720/60p 720/59.94p 720/50p 720/30p 720/29.97p 720/25p 720/24p 720/23.97p 480/59.94i 576/50i 640x480/60p 720(x2)x480/60i 720(x2)x576/50i 480/60p 480/59.
STATUS Display . The following information is displayed at the bottom of the viewfinder menu screen. A Input mode (SDI/HDMI/Camera) B 3G-SDI mapping information (LevelA/LevelB) only in 3G-SDI mode C Input signal format (1080p59.94Hz, ...) Memo : Information displayed in STATUS Display will not appear on the screen even after switching the input or signal. To view the information, press the [VOL./MENU/SET] knob (button).
. Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste by products. Contact your local authority for details in locating a recycle facility nearest to you.
. Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir. Eski Elektrikli ve Elektronik Cihazların ve Pillerin İmhası Hakkında Bilgi (ayrı atık toplama sistemlerine sahip olan ülkelerde geçerlidir) Bu sembolü (üzeri çizili çöp bidonu) içeren ürün ve piller evsel atı k çöpleri ile birlikte atılamaz.
. VF-HP900G VF-HP900G © 2022 JVCKENWOOD Corporation B5A-3500-20 YD07191119