COLOR VIDEO MONITOR INSTRUCTIONS TM-A13SU TM-A13UCV TM-A13SU-W For Customer Use: Enter below the Model No. and Serial No. which is located on the rear of the cabinet. Retain this information for future reference. – Model No. : Serial No.
Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor's capabilities. SAFETY PRECAUTIONS WARNING : FCC INFORMATION (U.S.A. only) TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS MONITOR TO RAIN OR MOISTURE. CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment. CAUTION : To reduce the risk of electric shock, do not remove cover.
CONTENTS SAFETY PRECAUTIONS .......................................................................................... 2 CONTROLS AND FEATURES ................................................................................... 4 HOW TO HANDLE BASIC OPERATIONS ................................................................ 6 HOW TO USE THE MENU FUNCTIONS ................................................................... 7 HOW TO INITIALIZE THE SETTING .......................................................
CONTROLS AND FEATURES FRONT VIEW [TM-A13SU / TM-A13SU-W] – PHASE CHROMA BRIGHT CONTRAST MENU + VOLUME/SELECT B A ON OFF INPUT SELECT POWER (Front Panel view of TM-A13SU shown) [TM-A13UCV] – PHASE CHROMA BRIGHT CONTRAST MENU + VOLUME/SELECT B A INPUT SELECT _ON —OFF POWER TM-A14PN – + (Front view of TM-A13SU shown) PHASE CHROMA BRIGHT CONTRAST MENU SELECT B A ON OFF INPUT SELECT POWER 1 Phase button [PHASE 2 Chroma button [CHROMA TM-A13UCV Notes: ] Press th
REAR VIEW [TM-A13SU / TM-A13SU-W] VIDEO A IN AUDIO B IN OUT A Y/C IN OUT B IN OUT VIDEO A IN OUT AUDIO B IN OUT A Y/C IN B IN OUT [TM-A13UCV] VIDEO A B IN IN OUT OUT To AC outlet (120 V AC, 50/60 Hz) (Rear view of TM-A13SU shown) 17 Audio A terminal [AUDIO A IN/OUT] 15 Video A terminals [VIDEO A IN/OUT] Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.
HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION Color system indication (NTSC or PAL ) 1. Press the POWER switch to turn on the power. _ON : Power turns ON. (Power indicator: lit) —OFF : Power turns OFF. (Power indicator: unlit) ON OFF NTSC POWER 2. Press the INPUT SELECT button to choose input. Selects video/audio signals input to terminals on the rear panel.
HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE
HOW TO USE THE MENU FUNCTIONS (cont'd) DISPLAY AND SELECTIONS IN THE MODE (SETTING) You can set the following set-up menu items. ● H. POSITION ● WHITE BALANCE screen ● CONTROL LOCK 1 ‰ H. POSITION : 00 WHITE BALANCE CONTROL LOCK : OFF Note: 3 ● Parameters for H. POSITION can be set separately depending on the video input (Input 2 A or Input B) selected by the input select buttons on the front panel.
Set-up menu items H. POSITION WHITE BALANCE DRIVE Purpose Settings Adjusts the horizontal position of the screen (+ : Horizontal position shifts to the right/–: Horizontal position shifts to the left) Adjusts the white balance –05 –04 •• –01 00 +01 •• +04 +05 Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment. Screen setting is changed to the selected setting mode. Select R/G/B buttons corresponding to the function display to adjust. R.
HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set and screen items, picture adjustment items and the volume level to their factory-set (initial) values. RESET screen RESET 1. Press the Power ( OFF (—). ) Switch to turn the power Are you “Yes” then “No” then sure ? <+> or <–> ON OFF POWER ) The RESET screen is displayed.
BASIC CONNECTION EXAMPLE Notes: ● Before connecting your system, make sure that all units are turned off. ● The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. ● Each pair of input (IN) and output (OUT) terminals are bridge-connected. However, the Y/C input terminal (Y/C IN) has no output terminal (OUT) corresponding to it.
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Note: ● Audio is only available on the TM-A13SU and TM-A13SU-W. It is not available on the TM-A13UCV. Problems Points to be checked Measures (Remedy) No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug.
SPECIFICATIONS MODEL TM-A13SU / TM-A13SU-W Color video monitor Type Color system TM-A13UCV NTSC (3.58), PAL 13" measured diagonally, 90° deflection, in-line gun, vertical line trio type (phosphor stripe pitch 0.64 mm) Picture tube Effective screen size Width Height Diagonal 11-1/8" (280.8 mm) 8-3/8" (210.6 mm) 13-1/4" (335.4 mm) Scanning frequency H : 15.734 kHz (NTSC), 15.625 kHz (PAL) V : 59.
7 Dimensions Unit : Inch (mm) < Side View > < Front View > 14-3/4 (371.5) 1/16 (1.3) 14-1/2 (368) 14-5/8 (370) BRIGHT CONTRAST MENU + VOLUME/SELECT B A ON OFF INPUT SELECT POWER TM-A13SU 13-1/4 (334) [Front foot] 11-7/8 (300) [Mid foot] 11-3/4 (296) [Rear foot] 3/4 (16) 3-5/8 (92) 4-7/8 (122.5) 1-16 (1) CHROMA 1/8 (2) * 11-3/8 (287) – PHASE 12-1/4 (310) * 8-5/8 (217) 4-1/8 (102) * Asterisks (∗) are used to indicate front panel dimensions.
TM-A13SU/TM-A13UCV/TM-A13SU-W COLOR VIDEO MONITOR JVC PROFESSIONAL PRODUCTS COMPANY DIVISION OF US JVC CORP. 1700 Vallery Road Wayne, NJ07470 JVC CANADA INC.