Separatevolume1

Additional Information
To enable the RM-LP25U CALL button and TALLY/PREVIEW input, set the TALLY SYSTEM
menu on GY-HD250/251 to STUDIO.
For other items, please refer to the INSTRUCTIONS
© 2007 Victor Company of Japan, Limited LST0612-001A
Setting GY-HD250/251 to enable RM-LP25U CALL button and TALLY/PREVIEW input
TALLY SYSTEM menu on GY-HD250/251
–––OTHERS[2/2] –––
• When setting TALLY SYSTEM to STUDIO, set RM-LP25U
to OPERATE OFF.
• The TALLY SYSTEM menu may not display depending on
the GY-HD250/251 software version. In that case, please
consult your JVC dealer.
TALLY SYSTEM
1394 REC TRIG.
BACK SPACE[HDV]
DR-HD100 A.OFF
MENU ALL RESET
PAGE B ACK
DRUM HOUR
FAN HOUR
STUDIO
OFF
P-1394
OFF
CANCEL
000000H
000000H
Item Function/Setting (bold characters indicate initial settings)
TALLY SYSTEM Select the FRONT TALLY, BACK TALLY light up information.
STUDIO: The FRONT TALLY and BACK TALLY lamps blink when CALL is
received from the remote control. CALL also blinks in red on the LCD/
VF screen.The FRONT TALLY and BACK TALLY lamps light up when
TALLY PROGRAM is received from the remote control. PGM also
appears in red on the LCD/VF screen.The BACK TALLY lamp lights up
when TALLY PREVIEW is received from the remote control. PVW also
appears in green on the LCD/VF screen.
TAPE: The TAPE recording status is indicated by the TALLY lamps depending
on the FRONT TALLY and BACK TALLY settings on the OTHERS [1/2]
menu.
TAPE+HDD: The TAPE recording status and the recording status of DR-HD100,
which is connected to the camera, are indicated by the TALLY lamps.
• For TAPE recording only, both FRONT TALLY and BACK TALLY lamps
light up.
• For DR-HD100 recording only, both FRONT TALLY and BACK TALLY
lamps blink twice at 1 second interval.
• For TAPE and DR-HD100 recording, both FRONT TALLY and BACK
TALLY lamps blink at 0.5 second interval.
LST0612-001A.fm Page 1 Wednesday, June 20, 2007 9:30 AM